Komshine EX35 Handheld Fiber Fusion Splicer Instruction Manual

June 12, 2024
Komshine

Komshine EX35 Handheld Fiber Fusion Splicer

Komshine-EX35-Handheld-Fiber-Fusion-Splicer-product

Product Information

The EX35 is a handheld fiber fusion splicer designed to enable fast and efficient splicing of fibers. It features a 3.5-inch TFT screen with 200X magnification and can save up to 10,000 splicing results and 100 images. The splicer has a battery capacity of 2600mAh, allowing for circular welding up to 100 times, including heating. With its small volume and lightweight design, it is easily portable. The product also includes special V-groove, 3 in 1 holders, removable SOC clamps, and durable ceramic fiber pressure heads. It is suitable for various fiber types, including SM (G652 & G657), MM (G651), DS (G653), and NZDS (G655). The splicer has a return loss of better than 60dB and an average splicing loss of 0.01dB.

Product Usage Instructions

  1. Prepare the fiber by cutting it to the appropriate length based on the fiber diameter.
  2. Place the fiber in the splicer’s fiber clamp, ensuring proper alignment.
  3. Select the appropriate splicing program using the display interface.
  4. Close the splicer’s windproof cover to protect against strong winds.
  5. Press the splicing button to initiate the splicing process. The splicer will quickly splice the fibers in approximately 9 seconds.
  6. If required, adjust the heating time and temperature using the display interface.
  7. Press the heating button to initiate the heating process. The splicer will heat the fusion point in approximately 35 seconds.
  8. Once the splicing and heating processes are complete, remove the fused fiber from the splicer.
  9. Repeat the above steps for additional splicing and heating as needed.
  10. After use, clean the splicer and store it in the provided carrying bag for safekeeping.

Please refer to the product manual for more detailed instructions and safety precautions.

Features Description

  • Fast-splicing 9s Fast-heating 35s (time and temperature can be adjusted) 5000 times electrode life
  • Return loss less than 60dB
  • Average splicing loss is 0.01dB
  • 2600mAh battery capacity,circular welding 100 times(including heating)
  • 3.5 Inch TFT Screen
  • 200X magnification
  • Special 3 in 1 holders,support jumpers,pigtails, bare fibers and flat fibers
  • Can save 10000 splicing results,100 images
  • Handheld fusion splicer,small volume,lightweight, and easily carrying

Products Features

Komshine-EX35-Handheld-Fiber-Fusion-Splicer-fig
1 Komshine-EX35-Handheld-Fiber-Fusion-Splicer-
fig 2

3 IN 1 holders
Suitable for bare fiber,3.0mm jumpers,pigtails and FTTH fiberKomshine-EX35
-Handheld-Fiber-Fusion-Splicer-fig 3Komshine-EX35-Handheld-Fiber-Fusion-Splicer-fig 4 Komshine-EX35-Handheld-Fiber-Fusion-Splicer-fig 5

Specification

Fiber Type SM (G652 & G657) / MM (G651) / DS (G653) / NZDS (G655)
Typical splicing loss SM: 0.02dB           MM: 0.01dB          DS / NZDS:

0.04dB
Return loss| better than 60dB
Typical heating time| 9s(Standard SM)
Typical heating time| 35s(heating time and heating temperature can be adjusted
Fiber Aligning Method| Meticulous; Core; Clad; Manual
Fiber Diameter| Clad Diameter is 80 ~ 150μm; Coating250 ~ 1000μm
Cutting Length| Coating layer<250μm: 8 ~ 16 mm; Coating 250 ~ 1000μm: 16mm
Heat-shrinkable Sleeve| 60mm / 40mm and a series of thermal sleeves
Tension Test| Standard 2N(can choose)
Fiber Clamp| Suitable for Bare fiber; Pigtail; Jumper wire; flat fiber,

optional holder,splicing type fast connector which is qualified for standard FTTX

Fiber Image

Magnification

| 200X(X-axis or Y-axis); 125X(X-axis or Y-axis)
Display| 3.5Inch TFT color LCD
External Port| USB 2.0 interface, convenient for data download, using U disk upgrade software
Splicing Program| 100(User Mode);  53(Factory Mode)
Heating programm| 40(User Mode);  11(Factory Mode)
Fusion Splicing Record| Saved 10000 groups splicing results.100 sets of latest Images
Electrode life| 5000 times
splicing times

(including heating)

| Splicing and heating continuously more than 100 times typically
Internal battery| Lithium battery 12.5V power supply (10.8V storage),

independent charger, charging time ≤3.5h

Power Supply| Power supply connector, external adapter

(Import AC: AC100~240V, 50/60Hz, 0~1.5A, Export DC: DC13.5v/4.8A)


Working environment

| Temp: -10~50℃; Hum: 0~95%RH
Elevation: 0~5000M; Resist the maximum wind speed: ≤ 15m/s
High-brightness lights| Convenient for placing the fiber at night
Dimension| 193 x 125 x 85(mm)
Weight| 1.05kg (Without Battery); 1.2kg (With Battery)

Products Display

Komshine-EX35-Handheld-Fiber-Fusion-Splicer-fig
6

Products list

Komshine-EX35-Handheld-Fiber-Fusion-Splicer-fig
7

HEAD OFFICE
KomShine Technologies Limited

CONTACT US

  • Add: 2F Bldg. D Qinheng Tech. Pk. Nanjing,JS, 210001, China

  • TEL: +86 ( 025 ) 66047688

  • Web: www.KomShine.com

  • Mail: info@komshine.com

  • Komshine reserves the right to improve, enhance, or modify the features and specificactions of KomShine products without prior notification.

  • Company and product names appearing in this catalogue are resisterd marks or trademarks of respective companies.

  • This catalogue is printed using environmentally friendly paper and ink.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals