Laifen LFTB01-P Wave Electric Toothbrush User Guide
- June 1, 2024
- Laifen
Table of Contents
Laifen LFTB01-P Wave Electric Toothbrush User Guide
Selecting the Right Brush Head
Gum Care (CS)
Gentle cleaning for comfortable daily brushing
Super-Clean (GS)
High-efficiency cleaning that leaves teeth feeling fresher
Ultra-Whitening (US)
Powerful cleaning that whitens and polishes teeth.
Startup & Mode Selection
Step 1 Attach your selected brush head.
Step 2 Long press the power button for 2 seconds to disable Flight Mode.
Please apply light pressure when pressing the button.
There is a 1mm gap between the handle and the brush head in order to reduce vibrations between the two.
Step 3 Press once on /pause Press twice switch modes
Mode 1
Mode 2
Mode 3
While the toothbrush is on, press the button to pause. If paused for 10
seconds, the toothbrush will automatically enter Sleep Mode.
For more information about the modes, please refer to the User Manual.
Customizing Personalized Modes
Using the lolfen App
Step 1 Scan the QR code to download and install the app from your app
store.
Android
105
Step 2
Ensure that the toothbrush is on and that the power indicator is lit.
If you need help connecting with the lalfen App, please refer to the User
Manual.
Step 3 Open the app and tap the “” to find your device. Then tap on the
device named LFTBO1-X-XXXX to link it (XXXX represents the device ID number).
Step 4 Customize your brushing modes by adjusting the Vibration Strength,
Oscillation Range, and Oscillation Speed.
Scientific Brushing Method
Step 1
Put a small amount of toothpaste on the brush. head, wet it with water, and
then turn on the toothbrush.
Be sure to put the toothbrush in your mouth before turning it on to prevent
the toothpaste from splashing.
Step 2
Position the toothbrush so that it is on the border between the gums and the
teeth. Tilt the toothbrush. upwards at a 45° angle and guide the toothbrush so
that it rests on each tooth for a few seconds.
Step 3
Every 30 seconds the toothbrush will vibrate to remind you to change the
brushing area.* After 2 minutes of brushing, the toothbrush will automatically
enter Sleep Mode.
This feature is not enabled by default and needs to be activated in the laifen
App.
Step 4
After brushing your teeth, rinse your mouth with water.
For more information on product usage please read the User Manual or visit
lalfen official website: www.laifentech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>