Pyle PHSP12 Indoor Outdoor PA Horn Speaker Instruction Manual
- June 3, 2024
- Pyle
Table of Contents
Pyle PHSP12 Indoor Outdoor PA Horn Speaker
Specifications
- Housing in aluminum
- Rating for Power/Load: 60 Watts RMS
- 16 Ohms for nominal impedance
- Transformer Tapping at 70 volts for 60, 30, 15, and 7.5 volts Transformer Tapping at 60, 30, and 15 Hz 400 Hz to 5 KHz in the range
- 103 dB SPL (1W/1m)
- Dimensions: 7″ H x 12.7″ W x 14″ D Mounting Bracket & Hardware Included
- Color: Grey
- Voltage: 100 Volts
Product Descriptions
Your 70 V or 100 V audio systems will benefit greatly from this 12.7′ indoor/outdoor horn speaker. Ideal for outdoor PA systems when you need a wide audience to hear your sound. The 70 V and 100 V transformers in this 60 watt speaker may be turned on or off at 60, 30, 15, and 7.5 watts. Hardware and mounting bracket are included for simple installation. With the PHSP12, you can make your voice heard.
Features
With this robust PA horn speaker, you can amplify your sound with clarity and 60 WATTS of power. You may play your favorite music as loud as you want and in style thanks to the high-powered 60 watt sound it creates.
400Hz – 5 KHz FREQUENCY RESPONSE
This 12.7 inch power horn can magnify up to 400Hz – 5 KHz for full range sound reproduction, making it effective enough to reach your desired response. Other features include 103dB SPL and 16 ohm impedance.
AUDIO SYSTEM FOR 70V/100V
The 70V or 100V audio system works wonderfully with this indoor/outdoor megaphone. Ideal for outdoor PA systems when you need a wide audience to hear your sound. Contains a 70V and 100V transformer that may be switched between 60, 30, 15 and 7.5 watts.
ALUMINUM HOUSING
The housing of this small horn loudspeaker is made of aluminum. It is incredibly simple to mount and add to your existing sound system thanks to the high duty housing and structure, which provides a firm base.
EASY INSTALLATION
To make installation simpler, the mountable public address speaker is supplied with a mounting bracket and accessories. The power horn’s complete dimensions are 12.7″ H x 12.7″ W x 14″ D, and it only weighs 9.64 lbs.
Frequently Asked Questions
Would this work for the PA system in a baseball stadium?****
Given how regularly I use them for outdoor purposes, it should. It needs a 70v amp that can deliver the necessary watts.
Red, black, white, and green wires are included with the speaker. How to attach them to the 40w Pyle PHSP12 tiny little home power amplifier is not specified, yet.****
The black wire serves as the common wire, and the colored wires are hot leads. It is possible for each color’s output power tap to be 5, 15, or 20 watts. Connect the black wire to the amplifier’s ground and one of the cables to the
- or hot of the amplifier. Even though I’m not sure which line is for what power, it’s a good guess that the red wire is for 20 watts.
Does the speaker function outside?****
Yes. Both an indoor and an outdoor speaker are present.
Red, black, white, and green wires are included with the speaker. How to attach them to the 40w Pyle PHSP12 tiny little home power amplifier is not specified, yet.****
The black wire serves as the common wire, and the coloured wires are hot leads. It is possible for each color’s output power tap to be 5, 15, or 20 watts. Connect the black wire to the amplifier’s ground and one of the cables to the + or hot of the amplifier. Even though I’m not sure which line is for what power, it’s a good guess that the red wire is for 20 watts.
Does the speaker function outside?****
Yes. Both an indoor and an outdoor speaker are present.
Can I use the stereo cord from my MP3 player?****
That would be a 70V PA speaker, not a speaker. It is important to use a PA amplifier with a 70V output. On a 70V system, you can connect speakers in series without the impedance changing. The MP3 player you now own is probably only capable of driving 8 ohm speakers.
Does this speaker really come with a transformer if I’m using the Pyle PHSP12 60 watt power amplifier with 25 and 70 volt output?****
Using 5, 10, or 20 W taps, you can individually adjust the volume of each speaker in a system with many speakers.
Does this speaker come with a transformer, as said, if I use the Pyle pcm30a 60 watt power amplifier with 25 and 70 volt output?****
Be aware that the 5, 10, or 20 W taps in a system with many speakers can be used to adjust the volume of individual speakers. The parallel wiring of the speakers is powered up to a maximum of 60 W. To acquire a range of levels from each speaker, for instance, you may utilize up to twelve speakers with 5 W taps or three speakers with 20 W taps apiece.
Can I hook up this PA speaker to the stereo in my car?****
Hello, a 70 volt amplifier is required for it to function. See the whole list of specifications for the device on our website, pyleaudio.com.
To connect it to a 1 Ch. RCA output, what is needed? No transformer at all?****
Hello, the device needs to be connected to a speaker output port or a 70 volt receiver. See the whole list of specifications for the device on our website, pyleaudio.com. Enter the model number PHSP121T in the search bar to find out more. I appreciate it.
Have a talkback available?****
Hello, you must connect the speaker to your 70 volt amplifier. See the whole list of specifications for the device on our website, pyleaudio.com. Enter the model number PHSP121T in the search bar to find out more. I appreciate it.
How do I connect a Pyle PHSP12 small tiny home power amplifier to a Pyle PCM20A 40w power supply?****
All colored wires have separate outputs, and the neutral wire is black. No, this horn cannot be used by an 800 what’s driver. It’s a 20 watt speaker, that’s it. You’re talking about a whole different horn.
Can someone recommend a little amplifier that I could use with this speaker? I must attach an MP3 player to the speaker.****
Hello, a 70 volt amp is required for this item. Check out the PT210 model. Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number in the search box. I’m grateful.