Radisys RMS420-C610-035 Flexviewing PC Imaging Server Instruction Manual

: June 4, 2024
: Radisys

Table of Contents

Radisys RMS420-C610-035 Flexviewing PC Imaging Server
Safety Information
AC power safety warnings
Lifting and rack mount enclosure safety
Electrical shock hazard
Environmental precautions and hazards
Child care and mechanical hazards
Electromagnetic compatibility
Replaceable batteries
Equipment identification marking – Manufacturer identification
Equipment identification marking – model identification
Equipment rating marking – ratings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Radisys RMS420-C610-035 Flexviewing PC Imaging Server

Safety Information

General safety precautions
Review the following precautions to avoid personal injury and prevent damage to this product or family of products to which it is connected. To avoid potential hazards, use the product only as specified. Read safety information on the product labels, and understand the precautions associated with safety symbols, written warnings, and cautions before accessing parts or locations within the unit. Save this document for future reference.

Additional information
Product manuals, news, data sheets, and support information are available on the Radisys Web site as applicable at www.radisys.com. Contact your Radisys sales representative if you have sales questions or need additional support information.

AC power safety warnings

For AC systems, use only a power cord with a grounded plug and always make connections to a grounded main.
The AC power cord is the unit’s main disconnecting device. The power socket-outlet shall be installed near the equipment and shall be easily accessible. Auxiliary AC on/off switches and circuit breaker switches are for power-control functions only (NOT THE MAIN DISCONNECT).

Lifting and rack mount enclosure safety

Some products may be intended for stationary rack mounting. Mount in a rack designed to meet the physical strength requirements. Disconnect all power sources and external connections prior to installing or removing the unit from a rack.

WARNING!

Some systems may be too heavy for one person to lift.
Secure all mounting bolts when rack mounting the enclosure.

CAUTION!

Operating Temperature- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be different than room ambient. The suggested operating temperature range is : 10 C to 45 C.
Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). The separate protective earthing terminal provided on this product shall be permanently connected to earth

Electrical shock hazard

To avoid electric overload, heat, shock, or fire hazard, you must take special measures and precautions using these products.

WARNING!

Do not operate in wet, damp, or condensing conditions.
The system should not be operated with the faceplates, blank panels, or covers removed. Some voltages on the board and inside the chassis present an electrical shock and/or energy hazard to the user. Keep hands out of the chassis when power is applied.
Only connect the system to a properly rated supply circuit, as specified on the product labels. Do not make connections to any terminal outside the range specified for that terminal. See the product label for correct connections. Contact your Radisys sales representative if you need additional support information.
Any repairs inside the chassis must be performed by a qualified SERVICE PERSONNEL only.

AC system warnings

To avoid shock, ensure that the chassis power cables are connected to a properly wired and grounded receptacle.
Verify power cord and outlet compatibility, and use the appropriate power cords for your power outlet configurations. Visit http://electricaloutlet.org for additional information.

Environmental precautions and hazards

WARNING!

To avoid injury, fire hazard, or explosion, do not operate this product in an explosive atmosphere.
Be careful when removing modules. Do not touch the module’s heat sink. It may be hot to the touch.

CAUTION!

Products with fiber interfaces contain Class 1 laser devices. Class 1 lasers are not considered to be hazardous.
All adjustments have been made at the factory prior to shipment of the devices. No maintenance or alteration to the device is required. Do not tamper with or modify the performance of the device.

Child care and mechanical hazards

Moving fans inside the chassis. This equipment is not suitable for use in locations where children are likely to be present.

Electromagnetic compatibility

WARNING!
This equipment is compliant with Class B of CISPR 32. In a residential environment this equipment may cause radio interference.

Replaceable batteries

CAUTION!

Risk of Explosion if Battery is replaced by an Incorrect Type.
Lithium batteries are not field-replaceable units. There is a danger of explosion if a battery is incorrectly replaced or handled. Do not disassemble or recharge the battery. Return the unit to Radisys for battery service.