DONGGUAN PC414A 2.4G Wireless Mouse User Manual

DONGGUAN PC414A 2.4G Wireless Mouse

Packing List

1. left click
2. right-click
3. middle click
4. DPI+
5. DPI-
6. backspace
7. forward button
8. power switch

Instructions for use

1. Middle button + right button: long press code (receiver inserted into the PC side, press and hold the mouse center + right button, close to the receiver within 5CM mouse backlight is lit up that the code is successful, more than 10 seconds need to be re-closed and open the mouse power switch and then repeat the above code process)
2. Side button 7 + center button switch backlight mode
3. Side button 7 + center button long press 3 seconds to close the backlight
4. 90 seconds of the mouse does not work to turn off the backlight for power saving, move the mouse, or press the button that lights up the backlight. (After 8 minutes of deep sleep need to press the button to wake up)
5. When switching DPI, the backlight and DPI value correspond to the same color for 3 seconds and then back to the backlight effect.

Side button 7 + center button to switch backlight mode:

• 7 colors are always on (Red, Green, Blue, Yellow, Ice, Blue, Purple, White)

Proper handling of products

(Waste electrical and electronic equipment) The mark is displayed on the product or its literature indicating that the product should not be disposed of with other equipment.

Proper disposal of the product Household waste at the end of its useful life

1. Prevent possible harm to the environment or human beings.
2. Health is associated with uncontrolled waste disposal, keep it separate.
3. Recycle from other types of waste and recycle responsibly to promote sustainable reuse of material resources Household users should contact the retailer from whom they purchased this product or their local government office to find out where and how they can recycle this item in an environmentally safe manner.
4. Business users should contact their supplier and check the terms and conditions of their purchasing contact, this product should not be mixed with other commercial waste for disposal.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s right to operate the equipment. This device complies with Part XV of the FCC Rules and

Operation is subject to the following two conditions:

1. This device must not cause harmful interference;
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

• This device meets the FCC radiation exposure limits established for uncontrolled environments.

Contact Us

• Whatever you need, we’re here to help.
• Just contact us and we’ll do our best to respond within 24 hours!

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>