LUXNA LXLPF2-60-P1D58 LED Multi Dimmable Driver User Manual
- June 3, 2024
- LUXNA
Table of Contents
LUXNA LXLPF2-60-P1D58 LED Multi Dimmable Driver
FEATURE
- Built-in DALI 2 protocol, no flicker in full dimming range;
- Secondary 0-10V (he darkest below 1V does not turn off);
- Primary Push dimming function; Push dimming has state memory function;
- Short circuit/ over temperature/ over voltage protection; reduce output current after over temperature;
- Standby power consumption 0.5W;
- Life span> 50,000 hours.
CONNECTION
- Start with setting the output current. The current can be easily configured by choosing the correct combination of the DIP switches(see fig F)
- Connect the luminaires to the driver according to the wiring diagram.(see Fig A, B,or C)
PUSH DIMMING (see wiring diagram, Fig A)
On/off: short push (100ms-1sec) on the switch
Stepless dimming: long push(1sec~8secs) on the switch
0-10V DIMMING (see wiring diagram, Fig C)
The driver supports any active 0-10V dimmer. Dimming curve, see Fig D.
As DALl and push dimming is always active, If use the DALI dimming and push
dimming
first, users have to short 0-10V interface and power on driver 15 seconds at
least to make 0-10V active before using 0-10V dimming.
DALI DIMMING (see wiring diagram, FigB)
The driver built-in DALI interface. DALI Dimming is always active.
FACTORY SETTING
0-10V dimming, 900mA
Warning: Please make sure the correct current is set before starting the driver!
SPECIFICATIONS
FAQ
LXDDP1D5860.V1
www.luxna-lighting.com
References
Read User Manual Online (PDF format)
Loading......