3nStar PDL110 9.7 Inch Customer Display User Manual
- June 12, 2024
- 3nStar
Table of Contents
PDL110
9.7” Customer Display
Product Introduction
PDL110 Is a colorful TFT LCD Display, this display supports more than 250 Nits
of brightness, which can provide clear and effective information for your
users.
PDL110 VGA Type does not support (DDC-2) automatic setting, the resolution
screen must be set manually before operating.
OSD language only supports English.
Features
Brightness 250 nits makes the image more vivid.
3nStar PDL110 is equipped with brightness 250 nits LCD panel, which makes your
shop more vivid and energic. With PDL110, you could present your information
for customer in various ways. For example, during the payment handling time,
your customer can see all information you display on the panel. The PDL110 is
a high-performance marketing tool with the lowest cost on the market.
Interfaces
PDL110 has 2 kinds of interface, HDMI/VGA, and USB. When PDL110 is USB
Interface, Its USB cable could get power from the system you are connected
with, so you are no longer in need of a power supply or adapter to power up
your display. This way it will be much easier for cable organization. For the
PDL110, if the product has VGA or HDMI PORT, the product must have a power
supply to support either or.
Specification
| Display Size | 9.7 inch wide |
|---|---|
| Technical Solutions | Display Link |
| Interface | USB/VGA/HDMI |
| Resolution | 1024 x 768 |
| Power Supply | 5v/12v |
| Power | 3W |
| Display Area | 197 (H) X 148 ( V ) MM 4:3 |
| Display Type | High brightness TFT – LCD (Digital Panel) |
| Back Light | LED |
| White Luminance | 250 Nits |
| Response time | 25 MS |
| Viewing Angle | 350 (Horizontal ), 60 ( Vertical ) |
| Temperature | Operation: -20c -45C |
| Safety Standard | FCC, CE, ROHS |
Product Overview
- Power Switch
- Menu Selection
- UP
- Down
- Automatic Adjustment
Installation
PDL110U USB Interface
-
Please apply the USB driver in the installation disc first WITHOUT connecting the USB cable to your PC device.
-
After finished the USB driver installation, please connect the USB cable to your PC device. Then power on your PDL110U.
-
Then you can see, there will be a new USB device port showed up in your DEVICE MANAGER.
Right click your mouse on desktop, then select the “Screen
Resolution” column. You could see the second display is already successfully
installed. -
Now you could find the “USB Display” icon on the lower right corner of desktop.
• Here is the function introduction of Display Manual: You could apply all the setting of Screen Resolution here.
• Check for update: It will connect to Display Link Website and check if there is any new software
PDL110VH-12 VGA/HDMI Interface
- Please connect the USB cable and VGA/HDMI cable to your PC device. Then power on your PDL110VH-12.
- Right click your mouse on desktop, then choose the “Screen Resolution”, you could see the second display is already successfully installed choose the recommended resolution for the second display.
www.3nstar.com