VEVOR PGYHJ1810 Leather Embossing Machine Instruction Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR PGYHJ1810 Leather Embossing Machine
Other Model
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
MODEL:PGYHJ1810
MODEL:PGYHJ3626、PGYHJ2615、 PGYHJ2612、PGYHJ2814
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
INSTRUCTIONS
Thank you very much for choosing this Leather Embossing Machine.
Please read all of the instructions before using it. The information will help
you achieve the best possible results.
WORK AREA
- Operate in a safe work environment. Keep your work area clean, well-lit and free of distractions.
PERSONAL SAFETY
WARNING! Always Wear personal protective equipment.
PERSONAL PRECAUTIONS
Control the Machine, personal movement and the work environment to avoid
personal injury or damage to machine.
- Do not operate any machine when tired or under the influence of drugs, alcohol or medications.
- Avoid wearing clothes or jewelry that can become entangled with the moving parts of a tool. Keep long hair covered or bound.
SPECIFIC SAFETY PRECAUTIONS
- Use the correct machine for the job. This machine was designed for a specific function. Do not modify or alter this machine or use it for an unintended purpose.
- Keep body parts away from pinch areas while using.
- Children are not allowed to operate this product unless accompanied by an adult
- Pay attention to safety during use to avoid crushing fingers.
WARNING!
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal.
Model and Parameters
Model| PGYHJ 3626| PGYHJ 2615| PGYHJ 2612| PGYHJ
2814| PGYHJ 1810
---|---|---|---|---|---
pressure range
| Inches| 14.210.2| 10.25.9| 10.24.7| 115.5| 7.13.9
mm| 360260| 260150| 260120| 280140| 180100
Strong Bearing Capacity| 1.5T(3300pounds)
Adjustable height of pressure stroke| 12mm(0.47inch)
Assembly and Use
-
Prepare the mold materials
-
Adjust the front, rear, left and right positions
-
Press down on the handle
-
Die cutting completion
Maintenance
- Avoid prolonged exposure to the sun to avoid aging.
Address： Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
