concept VP6200 Cordless Vacuum Cleaner Instruction Manual

: June 1, 2024
: concept

Table of Contents

concept VP6200 Cordless Vacuum Cleaner
Product Information
ACKNOWLEDGEMENTS
IMPORTANT SAFETY PRECAUTIONS
PRODUCT DESCRIPTION
OPERATING INSTRUCTIONS
- USE
ACCESSORIES
ENVIRONMENTAL CONCERNS
WARRANTY TERMS
Manufacturer
Contacts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

concept VP6200 Cordless Vacuum Cleaner

concept-VP6200-Cordless-Vacuum-Cleaner-product

Product Information

Specifications:

Battery Voltage: DC 29.6 V
Power: 450 W
Noise Level: 82 dB
Battery Capacity: 2500 mAh
Max. Operating Time: 60 minutes

Frequently Asked Questions

Q: How long does it take to fully charge the vacuum cleaner?
- A: The full charging time is approximately.
Q: Can the HEPA filter be washed with water?
- A: Yes, the HEPA filter can be rinsed with water. Ensure it is completely dry before reinserting it into the vacuum cleaner.
Q: What should I do if the vacuum cleaner is not used for an extended period?
- A: If the vacuum cleaner is not used for more than 3 months, it is recommended to charge it for 12 hours before storing it in a dry and cool place.

ACKNOWLEDGEMENTS

Thank you for purchasing a Concept product. We wish you much joy with your new appliance every day you use it.
Please read the instruction manual carefully before initial use. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

Technical specifications

IMPORTANT SAFETY PRECAUTIONS

Do not use the appliance in any other way than as described in this manual.
Make sure the mains voltage and current protection correspond to the values on the rating plate of the charging station.
Do not leave the appliance without supervision when it is turned on.
When disconnecting the unit from the wall outlet, never pull the power cord, grasp the charger and disconnect it by removing it from the receptacle.
Do not allow children or unauthorized people to handle the appliance, use it out of their reach.
Pay extra attention if the appliance is used near children.
Do not use the appliance as a toy.
Do not use any accessories other than those recommended by the manufacturer.
Do not use a charger with a damaged cord or plug and have it repaired immediately by an authorized service centre.
Keep the appliance away from heat sources such as radiators, ovens and other, protect it from direct sunlight and humidity.
Do not touch the appliance with wet hands.
Do not insert any objects into the openings. Do not use the appliance if any of the openings is clogged.
Take extra caution when vacuuming on stairs.
If the appliance intake is clogged, switch off the appliance and remove the dirt before switching on again.
When attaching accessories during cleaning or in the event of a malfunction, switch off the appliance and disconnect the charger from wall socket.
The appliance is only suitable for home use and is not intended for commercial use.
Do not vacuum anything burning like cigarettes, matches or hot ash.
Do not use the appliance in rooms with increased air humidity, do not vacuum flammable liquids such as petrol and do not use the appliance in rooms where these substances may be present.
Never vacuum without vacuum cleaner filters. Every time you use the appliance, make sure the vacuum cleaner filters are properly installed.
Do not immerse the power cord or the charger in water or any other liquid.
Check the appliance and the charger cord for damage regularly.
Never switch on a damaged appliance.
Before cleaning and after use of the appliance, switch off the appliance and allow it to cool down.
Before vacuuming, remove all large or sharp objects from the surface intended for vacuum cleaning, such objects may damage the vacuum cleaner filter.
Do not use the appliance with dirty filters.
CAUTION! Use only distilled water to fill the water tank.
Never add detergents, perfumes, stain removers, etc. to the water.
Do not put the battery in fire or expose it to temperatures above 40 °C.
Do not touch the moving parts of the appliance during operation.
Do not repair the appliance yourself. Contact an authorized service centre.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance performed by the user must not be carried out by children unless they are at least 8 years old and under supervision.
Children aged under 8 years of age must be kept away from the appliance and its power cord. Do not let children play with the appliance.

Damages from failure to follow the manufacturer’s instructions are not covered by the warranty.

PRODUCT DESCRIPTION

concept-VP6200-Cordless-Vacuum-Cleaner-fig-1

Handle with control and signalling
Battery
Battery release button
Hand unit
Extension tube with bend
Turbo nozzle
Lock release control
Dust container
Dust container lid lock
Slot nozzle
Nozzle with a brush
Wall stand
Charger
Water tank
Hardfloor brush
Dust container lock
Cleaning cloth

Control and signalling description

A Power button
B Mode switching button
C Power level signalling
D Battery charging status signalling
E Battery charging status signalling

OPERATING INSTRUCTIONS

Vacuum cleaner assembly

Always disconnect the plug out of the electrical outlet before assembling or removing accessories!

concept-VP6200-Cordless-Vacuum-Cleaner-fig-3

Attach the extension tube (5) into the hand unit of the vacuum (4) until you hear a click sound. To remove the tube from the hand unit, press the release button (7) and pull away. By pulling the plastic part of the pipe (5), the pipe can be bent in the joint. When straightening the pipe, you will hear a crack, the pipe will be fixed in a straight position in the elbow.
Attach the turbo nozzle (6) to the extension tube (5), you will hear a click sound. To remove the turbo brush from the extension tube, press the lock button (7) and pull away. You can insert the turbo nozzle to the hand unit as described (4).

BATTERY INSTALLATION

Insert the battery (2) into the body of the hand unit (4) and push it lightly. When you hear a click, the battery has been successfully installed. To release the battery, press the battery release button (3) and pull to remove it.
The battery charging point is located on the bottom of the handle of the hand unit.

Note: To prolong the battery life, always charge the battery when the battery is nearly empty. Do not store or recharge the appliance in environment with temperatures below 0 °C or higher than 40 °C. These temperatures may damage the appliance. During the charging process, the temperature of the appliance may increase, this is normal.

While the battery is being charged, the power indicator (D) flashes and remains lit after charging. If both indicators (E, D) are lit during operation of the vacuum cleaner, the battery is sufficiently charged. If only one indicator is on or flashing, the battery needs to be charged. If you do not use the vacuum cleaner for more than 3 months, allow it to charge for 12 hours. Then place the vacuum cleaner in a dry and cool place.

USE

Before installing the battery, check if it is fully charged.

Press the power button (A) located on the handle of the rod part of the vacuum cleaner to switch on the appliance.
By pressing the button (B) repeatedly, you can change the power of the vacuum cleaner (3 power levels are available).
After switching the vacuum cleaner on, the 2nd power level is automatically set.
The current power level is indicated by a light signal (C).
At the lowest power, i.e. level 1, signalling (C) is not on. When medium power is switched on, i.e. level 2, the signalling lights up white, at maximum power, i.e. level 3, the signalling lights up blue.

Note

We recommend to use the maximum power of both the hand unit and the turbo brush in the case of heavily soiled surfaces or medium-high or high pile carpets.

WET WIPING (MOP)

concept-VP6200-Cordless-Vacuum-Cleaner-fig-5

If you also want to mop during vacuuming, place the turbo brush in the water tank (14) and press lightly, you will hear a click (Fig. 1).
Before use, loosen the water tank cap and fill the tank with distilled water (Fig. 2).
If you want to mop, moisten the cleaning cloth (17) by repeatedly pressing the water pump on the water tank. We recommend to moisten the cloth before use to ensure more efficient cleaning.
After mopping, pour water out of the tank.

CAUTION! Use only distilled water to fill the water tank!

Always switch off the appliance before filling the water tank with distilled water, emptying the water tank or replacing the cleaning cloth.

REMOVING AND CLEANING THE CLEANING CLOTH

Use the power button to switch off the appliance.
Remove the water tank from the turbo brush (6) and then remove the cleaning cloth.
Wash the cloth in the washing machine at a maximum of 40 °C and use a mild detergent.

Important: Never use bleach or fabric softener to wash the cloth.

ACCESSORIES

Select the accessories according to the nature of the surface to be cleaned.
Water tank with a cleaning cloth – suitable for hard floors

Slot nozzle – suitable for wall corners, car cushioning, radiators, etc.
Nozzle with a brush – suitable for bedding, fabric, sofa, etc.
Hardfloor brush – suitable for hard floors
Wall stand – assembly kit

EMPTYING AND CLEANING THE DUST CONTAINER

concept-VP6200-Cordless-Vacuum-Cleaner-fig-6

To empty the dust container (8), first press the dust container release lock (16) and remove the container from the hand unit (4).
Press the dust container lock (9) to open the container, empty the dust, remove the soiled filters from the container and clean them.
Insert cleaned filter back in the dust container and close the lid.
Insert the dust container (8) back in the hand unit, you must hear a click.

REMOVING AND CLEANING THE FILTER

Turn the lid of the hand unit to the left and, after releasing, pull out the HEPA filter vertically.
The HEPA filter can be rinsed in water. Allow the HEPA filter to dry before returning it back to the hand unit.

SERVICE

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by a qualified specialist or the service centre.

ENVIRONMENTAL CONCERNS

Packaging materials and old appliances should be recycled.
Packaging materials may be disposed of as sorted waste.
Dispose the plastic bags made of polyethylene (PE) of as sorted waste.

Recycling of the appliance at the end of its lifespan:

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (Waste Electrical and Electronic Equipment – WEEE). The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The disposal of such material has to be done according to the recycling regulations. For more detailed information about recycling of this appliance see the authorized local office or service for household waste disposal or the shop, where you purchased the appliance.

The product meets all the necessary requirements of the EU directives applicable to the specific product.

Changes in text, design, and technical specifications are subject to change without prior notice and we reserve the right to change them.

WARRANTY TERMS

Warranty

The manufacturer (or importer) is responsible for ensuring the product complies with the requirements of applicable legal regulations as well as those of the relevant technical standards. Moreover, they are responsible for ensuring the product has the properties the manufacturer described in documents related to the goods or those reasonably expected by the customer with regard to the nature of the goods or based on advertising produced by the manufacturer, and further they are responsible for ensuring the product is fit for the purpose proposed by the manufacturer or that a product of the same type is normally used for. The quality warranty term is 24 months from product takeover by the customer.

The warranty does not apply to wear and tear caused by regular use. The customer shall not be entitled to any warranty claims if, prior to taking the product over, they knew the product contained a defect or if the defect is attributable to the customer. In terms of these warranty conditions, a defective battery is considered a battery that is electronically inoperative (i.e., does not communicate with the base unit, the charging or discharging circuits are defective, etc.) or has an internal short circuit.

Defects or changes in parameters caused by normal use and wear (e.g. natural capacity decrease) are in no way considered a defect in terms of warranty. The battery is provided warranty service for a period of 6 months. In terms of these warranty conditions, the battery has the nature of a consumable, for more details see „Consumables“.

Consumables

For consumables (batteries, etc.) we guarantee the preservation of technical parameters for 6 months, in case it was not damaged by improper use and its lifetime has not expired.

The warranty specifically does not apply:

if the product installation, operation and service conditions stipulated in the product operating manual have not been adhered to,
to malfunctions caused due to mechanical, heat or chemical damage, short circuit, over voltage or incorrect installation,
to malfunctions caused by an inexpert third-party intervention,
to malfunctions caused by natural disaster,
to malfunctions caused by insufficient or inappropriate maintenance in violation of the operating manual, including malfunctions caused by water and other sediments,
to changes in colour of the heating surface or to scratching of the surface caused as a result of using the products in an unusual manner,
to appearance and functional changes caused by exposure to sunlight, thermal radiation of water and other sediments,
if the service life of certain product parts expires, e.g. for accumulators, bulbs, etc.

The warranty does not apply to any products and services provided along with the product (gifts, promotional articles, etc.).

Filing a complaint

A complaint against a product defect must be filed as soon as identified, yet no later than before the end of the warranty term.
The customer must file a product complaint with the dealer from which they have purchased the product, or with any authorised service centre, a list of which is included in the product package, or available at www. my-concept.com.
While filing a product complaint, the product must be duly cleaned and securely packed so as to prevent any damage during its transport to an authorised service centre, where relevant, unless the product is delivered in person.
The customer must submit proof of having concluded a purchase contract for the product by producing the receipt.
While filing their complaint, the customer must indicate the noted defect and identify the preferred complaint application method.

Complaints processing

As long as the noted defect may be removed, the user has the right to have the defect duly removed free of charge on a timely basis. If the noted defect is not removable, or if the customer becomes entitled to replacement of the product or a part thereof, yet the replacement is not possible, for example due to the product having been sold out, the customer has the right to return the product (withdrawal from the contract).

The customer shall have the right to a new product (replacement) or to replacement of a part of the product even if the defect can be removed, provided they cannot properly use the product due to repeated occurrence of the defect or due to a high number of such defects. In such a case, the customer also has the right to return the product (by withdrawing from the contract).

If the product is not returned (the customer does not withdraw from the contract), or if the customer does not apply the right to a new defect-free product (replacement), to replacement of a part thereof or to repair of the product, they may request a reasonable discount. The customer also has a right to a reasonable discount if a new defect-free product cannot be supplied to them, or if a product part cannot be replaced or the product repaired unless the situation is remedied within a reasonable time limit, or if remedying the situation would create major discomfort on the part of the customer.

The seller, authorised service centre or a staff member authorised by them must decide about each complaint immediately or within three business days in complicated cases. This term does not include a reasonable period of time, depending on the type of product concerned, required for the defect to be assessed by an expert. A complaint, including defect removal, must be dealt with without any undue delay, yet no later than within 30 calendar days of the complaint filing date, unless the seller and the customer agree on a later deadline.

On returning the product (withdrawing from the contract) the customer must return any accessories and documents supplied along with the product. The customer does not have the right to keep the defective parts and components of the product replaced as part of a repair of the product. This shall be without prejudice to any other rights the customer may have in relation to the purchase of the product.

Remark: Complaints against products damaged in transport are governed by the carrier’s complaints procedure.