LA BOITE CONCEPT PR LINK Multiroom Speaker User Manual
- June 1, 2024
- LA BOITE CONCEPT
Table of Contents
LA BOITE CONCEPT PR LINK Multiroom Speaker
Product Specifications
- Power Input: AC 100-240V ~ 50-60Hz, 120W
- Speaker Power: 240W total (four channels)
- Dimensions: L: 360mm, H: 160mm, P: 250mm
- Weight: 6 kg
Product Usage Instructions
- Read all instructions provided in the user manual.
- Unpack the contents of the PR LINK speaker box.
- Connect the power cord to a suitable power source (AC 100-240V).
FAQ
- What should I do if there is no power?
- If the speaker is not powering on, check the power source connection and ensure it is receiving power within the specified range (AC 100-240V).
- How can I connect my audio sources to the speaker?
- You can connect your audio sources using the provided input options such as Optical RCA, AUX USB C & USB A, Bluetooth, and ARC IN among others. Refer to the user manual for detailed instructions on each type of connection.
- What is the warranty coverage for the PR LINK speaker?
- The speaker is covered by La Boite Concept’s limited warranty. Make sure to register your speaker on their website and retain proof of purchase for warranty claims.
YOUR PR LINK SPEAKER
BOX CONTENTS
- IEC C7 power cord connector
- Audio cord RCA to jack auxiliar 3.5mm
- Quick start
- PR LINK speaker
SAFETY INFORMATION
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install under the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Respect the safety principle of the biased plug or an earth-type plug. A biased plug is equipped with two pins, one larger than the other. An earth-type plug has two pins and a third of the earth-type. The large pin or the third pin are provided for your safety. If the provided pin is not adapted to your electrical wall power socket, call an electrician to replace the obsolete electrical wall power socket.
- Protect the power supply cord from being stepped on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for a long time.
- Have all maintenance work done by qualified, specialized personnel. Repairs are required when the device has been damaged: power cord or plug is damaged; liquid spilled on the device or if an object has fallen on it; if it rains on the device or if it is damp; if the device not normally operating; or is the device has fallen.
ATTENTION
- The purpose of the exclamation point in the equilateral triangle is to inform the user of the presence of important instructions in this manual about how to operate the device and maintenance operations.
DANGEROUS VOLTAGE
- The luminous indicator with the “arch in an equilateral triangle” symbol is intended to warn the user of the presence of a “dangerous current” not insulated in the product, and this current could be strong enough to cause an electric discharge on people.
DEEE SYMBOL
- The separate recycling of electrical and electronic devices. This product contains electrical and electronic equipment that can be reused, recycled or recovered, and therefore must not be discarded in your usual trash, which is not selectively sorted. Please return the unit or contact the authorized dealer who supplied you with the product for more information.
CE MARK
- This product in conformed to the European directives related to low voltage (2006/95/EC) and electromagnetic compatibility (89/336/EEC) when the unit is installed and used according to the user’s manual instructions. To guarantee extended conformity, only La Boite Concept accessories should be used with this product and the maintenance operations must be conferred to qualified and specialized personnel.
FCC STATEMENT
NORMES FCC
The PR LINK speaker in an acoustic speaker which integrates a power amplifier.
WARNINGS To reduce the risk of fire or electrical discharge, do not
expose the unit to rain or wet sources. The unit is class 1 classified, and it
must be connected to the electrical wall power socket with an earth plug. The
unit must be installed so that it can be removed from the electrical network
through the earth plug (or with an adapted connector located on the rear side
of the unit). If the power plug is used as a disconnection device, the unit
must be available and easy to use. Only use the power cords supplied with the
unit. We recommend not to place in a confined space. Do not place the unit on
a rug, or on a smooth surface, and do not obstruct the air holes, the
amplifier’s radiator (blades), or the output screens. The unit must not be
used near water; it must not be exposed to an evacuation source, or to
splashing, or to any other types of liquids. No object filled with water such
as vases, should be placed on the unit.
WARNING DISCLAIMER The PR LINK set-up is a very important step for the
correct use of the product. The end user should carefully read the assembly
guidelines before setting up the product or consult a brand representative in
case of any questions. CCLAB La Boite concept and its distributors cannot be
held responsible in case the product falls due to a mounting that did not
follow these guidelines.
IMPORTANT : THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITIES FOR RADIO OR
AUDIOVISUAL INTERFERENCES GENERATED BY UNAUTHORISED CHANGES MADE ON THIS
DEVICE. SUCH CHANGES COULD VOID THE MANUFACTURER’S WARRANT AND CANCEL THE
AUTHORIZATION OF UTILIZATION BY THE USER.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment was created and tested in conformity with the limits of class B digital devices under FCC rules. These limits were defined to provide reasonable protection against dangerous interferences inside a residential installation. The equipment generates, uses and may emit radio frequency radiation if it is not installed or used in conformity with the instructions, and this may cause dangerous interference for radio communications. However, it is impossible to guarantee that no interferences will appear in a specific installation. If this device generates interferences that disturb the reception of radio or television emissions, which may be noted by activating or deactivating the device, we propose that the user try to remedy such interferences in one of the following ways:
- Reorient or move the reception antenna ;
- Increase the distance between the equipment and the radio-television set ;
- Connect the device to a wall power socket of another circuit than that one used for the radio or the TV ;
- Contact the dealer or an experienced TV/radio technician for assistance.
The pieces of equipment recommended by the La Boite concept comply with FCC exposure guidelines and are approved as part of an uncontrolled environment. These types of equipment have been designed so that are installed and used from a minimum distance of 20 cm between the transmitter equipment and the user(s).
FCC CAUTION
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
AERATION / IMPORTANT
The unit may heat when used. Never operate the central part without its side
bases. Do not place the equipment in a completely closed room or in a
compartment insufficiently ventilated. Make sure that no small object can pass
through the PR LINK. If it happens, immediately switch off the device,
disconnect it from the wall power socket and contact your dealer for
assistance and advice.
LOCATION
Carefully select a spot for installing your equipment. Avoid placing it
directly in sunlight or near a heat source. No fire source such as candles
shall be placed on the device. Also, avoid any source which could cause
vibration, dust, coolness or moisture. The device can be used at average
temperatures. The unit must be installed on the two (2) PR LINK-provided legs.
Do not operate the central part without its side bases. Do not install the
equipment in a completely closed room or in a set of compartments. Do not
place the unit on an unstable surface or on a shelf. Make sure that the
furniture inserts have been correctly fastened. If not, the unit could fall
and injure a child or an adult, and damage the product as well. Due to the
disturbed magnetic fields, no record player or CRT television set must be
placed near the device to avoid possible interference.
POWER SOURCE
The unit should only be used with the type of electric power source compatible
indicated in the trapdoor storage space. If you are not sure about the power
source rating in your place, please contact your dealer or the company
responsible for the electric power installation in your area. The unit was
designed to be left in Stand-by mode when not in use; this wall allows
increasing the amplifier’s life (this is true for all electrical devices). To
switch off the unit, press the ON/OFF button on the rear of the device (metal
plate located under the central unit). If you do not intend to use the unit
for a long period, simply unplug it from the wall power socket.
OVERLOAD
Avoid overloading the wall-mounted electrical installations or the extension
cords because this could cause a fire or an electrical discharge. Overloaded
DC installations, extension cords, damaged power cables, damaged or cracked
insulation and broken plugs are dangerous. They could cause a discharge or a
fire. Make sure that each cables are correctly inserted. To avoid humming or
background noise, do not mix interconnections with the power cord or
loudspeaker cables.
CLEANING
In order to clean the unit, wipe it with a dry, lint-free cloth. Do not use
liquid cleaning products containing alcohol, ammonia or abrasives. Do not use
a spray on and near the unit.
REPAIRS
These units should not be repaired by the user. Do not try to repair, dismount
or unassemble the unit if a problem occurs. A strong electric discharge could
take place if these precautionary measures are not respected. In case of a
problem or failure, please contact your dealer.
LA BOITE CONCEPT
LIMITED WARRANTY
- This product was designed and manufactured under the most rigorous quality standards. However, in case of a problem, La Boite concept, and their national distributors, guarantee labour (exclusions possible) and spare
- parts free in all countries served by a La Boite concept-approved distributor.
- This limited warranty is valid for two years from the date of purchase unless exclusions are applicable in some countries according to national legislation. Contact La Boite Concept’s distributor in your country for more information. Please make sure to subscribe to the warranty on the La Boite concept website.
- Please make sure you register your PR LINK speaker on our website: www.laboiteconcept.com/register.
- Or use this QR code to access directly:
- The warranty is limited to the repair of the equipment. Transport or other costs, and risks associated with the pickup, transport and installation of the products are not covered by this warranty.
- The warranty is exclusively reserved for the original owner and may not be transferred.
- During the 2-year limited warranty period, please preserve cartons boxes and protective foams.
- This warranty is only eligible for products with faulty workmanship and/or defective parts at the moment of purchase and does not apply in the following cases:
- Deteriorations resulting from an incorrect installation, connection or packaging.
- Deteriorations resulting from a usage other than the correct usage described in the User Manual, negligence, changes or the use of parts not manufactured or approved by La Boite concept.
- Deteriorations resulting from a piece of defective or unsuitable auxiliary equipment.
- Deteriorations resulting from accidents, lightning, water, heat, war, breaches of public order, or other causes outside of the reasonable control of La Boite concept or its approved distributors.
- Products with serial numbers modified, erased, eliminated or rendered unreadable.
- Products repaired or changed by an unauthorised person.
- This warranty is an addition to any national/regional legal obligation on behalf of the national distributors or dealers and does not affect your statutory rights as a customer.
- To claim this warranty please use the original packaging of your PR LINK.
HOW TO FILE A CLAIM UNDER THE WARRANTY
Please follow the procedure below if you desire to file a claim under the
warranty:
- If the equipment is used in the country where it was purchased, please contact the distributor approved by La Boite concept which sold the equipment.
- If the equipment is used in a country other than the country where it was purchased, please contact the national La Boite concept distributor of the residence country, which indicates to you where you can have the equipment repaired. If you desire to file a claim from France, please contact La Boite Concept in France at laboiteconcept.com to obtain an accurate telephone/email address of your local distributor. To validate, your warranty, you should present the original copy of your sales invoice or another form of proof of your purchase and the date of purchase.
PR LINK
GENERAL DESCRIPTION
QUICK START
SET UP
You can take full advantage of PR LINK wherever you place the speaker in your room. Ideally, the unit should have a wall behind it (10-15 cm) to reflect the bass and get a better rendering. The audio system is designed to give you high-quality stereophonic listening and immersive sound, whether you’re sitting or standing close to the unit. As a result, the listener doesn’t need to be in a central position to enjoy optimal stereophonic sound, and multiple listeners can enjoy stereophonic sound diffusion simultaneously. Furthermore, it is not necessary to place the PR LINK symmetrically on the walls of the room.
TURNING THE PO WAS ON/OFF
-
Insert the power cord into the power cable plug located at the back of the PR LINK.
-
Connect the power cord to the wall socket.
-
To turn the PR LINK on, switch on the ON / OFF button on the back of the speaker. The Bluetooth ® LED will start blinking.
-
The PR LINK will automatically go into standby mode if you leave your device without a signal for 20 minutes. The standby LED will be red. To wake up the device, press the control button or play music from the last source used.
-
To turn the PR LINK into temporary «off» mode, press the control button until the LED turns off.
Press the button again to restart it. The USB charging ports will not continue to operate while the PR LINK is in «off» mode. -
To turn off the PR LINK completely, switch off the ON/OFF button on the back of your speaker.
All LED lights and the USB charging port power supply go out.
CHOO SING YOUR SOURCE
- Press the control knob to select your source and/or to switch between connected sources.
- A lit LED indicates the source you have selected. Connection order (from left to right): Bluetooth® AptX, Streamer Multi-Room, Auxiliary Jack 3.5mm, RCA, Optical, ARC.
SOURCE PANEL ACCESS
- The top of the PR LINK has a magnetic trapdoor. Press the back of this (area shown in orange below) to release it.
- Remove it to gain access to the source panel, featuring various connectors such as ARC, Optical, Auxiliary Jack 3.5mm, RCA, charging ports, streamer ESCAPE x LA BOITE CONCEPT.
USE
BLUETOOTH® CONNECTION
Your PR LINK is equipped with Bluetooth® AptX: This technology enables you to
send your music from your tablet or smartphone, cable-free, to your speaker.
The PR LINK’s Bluetooth® receiver lets you listen to high-definition music
wirelessly.
To use this connection, simply:
- Turn on your PR LINK.
- Bluetooth is the default source and turns on automatically. The LED indicator on the PR LINK starts flashing white.
- Activate the Bluetooth® functionality on your device (tablet or smartphone).
- Press once the pairing button called BT PAIR in the hatch, a search sound is output and the LED indicator flashes quickly.
- On your device, select PR LINK from the list.
- Once the LED lights up continuously and you hear a continuous tone, you’re connected.
- You can now enjoy your wireless listening and control your playlists from your source (tablet and smartphone) within a radius of around 20 meters of your PR LINK.
NOTE
You only need to pair your tablet or smartphone once with your PR LINK, and
the device is then included in the list of your Bluetooth® devices. When
pairing a new device, press the button again and repeat the above steps. Your
PR LINK can store up to 6 devices in its memory.
JACK AUXILIAR 3.5MM CONNECTION
Use the 3.5 mm jack auxiliary input to connect your PR LINK to audio sources such as your CD player.
- Connect the audio cable to your PR LINK located on the source panel and to the audio output of your music device (source).
- Use the source control knob to select the AUXILIAR input.
RCA CONNECTION
Use the RCA input using the cable supplied (the double-ended cable with RCA
plug and 3.5mm jack audio device) to connect your PR LINK to audio sources
such as your cell phone, tablet, computer or tablet.
- Connect the supplied RCA audio cable to your PR LINK located at the source panel and to your source’s audio output.
- Use the source control knob to select the RCA input.
OPTICAL CONNECTION
Use the optical input to connect your PR LINK to your TV, hard disk drive, streaming player, satellite or cable receiver. The optical input only works with PCM stereo. If a connected device sends 5.1 sound (or similar surround sound), the PR LINK will not work.
- Connect the optical audio cable to your PR LINK located at the source panel and to the optical audio input of your source.
- Use the source control knob to select the OPTICAL input.
ARC CONNECTION
Use the ARC input to connect your PR LINK to your TV. The ARC input is useful
for controlling the volume of your PR LINK from the TV remote control.
- Connect the ARC audio cable to your PR LINK located at the source panel and to the HDMI ARC audio input on your TV.
- Use the source control knob to select the ARC input.
Note: To benefit from HDMI ARC technology, the devices to be connected
must be compatible.
Your TV must have an HDMI ARC output. HDMI connection allows you to connect
your PR LINK indistinctly to your game console, DVD player and so on. With ARC
functionality, your PR INK will automatically receive sound.
USB-A ET USB-C CHARGER
- PR LINK features an integrated USB A port and USB C charging port. The charging ports will power all your USB peripherals. Switching the PR LINK off in «off» mode, or using the main switch and standby mode, will cut power to the socket.
- The USB A and USB C charger is compatible with most USB devices at 5V power supply and can provide up to 2A for USB A and USB C charging current.
- Note: Never use the charger with damaged cables, as these could overheat and cause a fire.
- Charging current for USB-A and USB-C devices is limited to 10W. This is sufficient to charge most smartphones and tablets. The charger is not compatible with the older iPod Classic (pre-2010) and other types of device that are not fully compatible with standard USB cables.
AUTO STANBY
- Auto-standby occurs after 20 minutes with no audio signal (except via the STREAMER source).
- Automatic wake-up is only possible via the last source used when the speaker has switched to automatic standby.
STREAMER ESCAPE X LA BOITE CONCEPT WI-FI MULTIROO M CONNECTION
- Connect the adapter (1) to the male USB-C socket on the PR LINK source panel.
- Connect the streamer (2) to the adapter’s optical jack and micro USB connector.
- The streamer is powered and a red LED is flashing. It’s ready to be configured.
Make sure that your phone or tablet is connected to the same Wifi network as the one you wish to use:
- Android: Open the Google Home application and select the ‘’+’’ symbol at the top left of the start screen.
- IOS: Go to Wifi settings on your iPhone or iPad and select ‘’Escape M1 XXX’’ under ‘’Configure a new AirPlay speaker’’.
Note: Please refer to the Escape streamer manual to learn more about how it works.
WHAT TO DO?
TO CLEAN YOUR PR LINK
Before cleaning the device, unplug your PR LINK from the power socket. Clean the device only with a dry cloth. Do not use cleaning alcohol or solvents to clean the device’s surface because these could damage the painting and cause electrical failures or fire if they penetrate the device’s electronics.
NO POWER
Make sure that the IEC cable is solidly connected. Make sure that the plug is
fully inserted in the power socket and there is power. Check that the master
ON / OFF located underneath the loudspeaker is positioned on “ON”. Make sure
that the PR LINK is not in standby mode. Make sure that the device is switched
on by checking the Bluetooth® white LED on the top panel.
NO SOUND
Make sure that the volume is turned up to an audible level and that the input
source is at its maximum. Make sure that an available input source is
selected. Make sure that the PR LINK is not in standby mode. Check if the
bluetooth connection with your device is still active. Finally, if you still
cannot hear any sound coming out of the PR LINK, increase the volume.
THE SOUND IS DISTORTED OR BUZZES
Check the connections of your music readers. Make sure that all the connecting
cables are correctly plugged in, especially the earth/protection shield
connections. Make sure that your cables are in good condition.
BACKGROUND NOISE AND UNDESIRABLE INTERFERENCES
Separate the device from other electrical appliances that may be causing the
interference. If the above solutions do not remedy your problem, please
contact a professional. Your home electrical installation may be connected to
the earth’s ground or it may be polluted by electrical parasite devices that
imply audible noise. For any repairs during or after the warranty, please
contact your dealer.
THERMAL PROTECTION OF THE PO WAS AN AMPLIFIER
In the case of high-level extended uses, a rising temperature can alter the
performance of the amplifier. Above 110 degrees, the highest level allowed for
safe optimal listening conditions must be lowered until the amplifier cools
down.
BLUETOOTH® ISSUES
When connecting a new device make sure the PR LINK input source is switched to
Bluetooth®. If the PR LINK does not show up on your device make sure to
manually refresh the Bluetooth® device list on your phone/device after rapidly
pressing the PR LINK Bluetooth button. There will be a short audio signal once
your device makes the connection. If you can’t hear any sound make sure the PR
LINK is not on standby and turn up the volume.
Your device may lose connection to the PR LINK when leaving the Bluetooth
range or if in standby mode. In this case, a Bluetooth connection can easily
be made again from your phone’s Bluetooth settings page ( without the need to
press the Bluetooth button on the PR LINK).
Note that depending on your installation and your mobile device the
Bluetooth range will be limited to 5-10 meters or less if walls or furniture
obstruct the signal.
TECHNICAL SUMMARY
SOURCES
- USB-C Wi-Fi Multi-room input for Streamer Escape AirPlay2®, Chromecast®, RoonReady® et Spotify Connect® Bluetooth® 5.1 AptX
- Auxiliaire jack 3.5mm input RCA input
- Optical input: optical digital audio input DAC Wolfsond 24 bits USB ARC input
USB CHARGERS
- 1 X USB A 5V – 2A
- 1 X USB C 5V – 2A
DIMENSIONS & WEIGHT
- L : 360mm, H : 160mm, P : 250mm
- Poids: 6 kg
LOUDSPEAKERS
- 4 exclusive CCLAB La Boite concept speakers :
- 1 x 4.5’’ Medium paper cone with very long excursion – neodymium magnetic load
- 1 x 4,5’’ Woofer paper cone with very long excursion – neodymium magnetic load
- 2 x 1.9’’ dome tweeter
POWER
The four channels total 240W.
- 2 Class D amplification stages for midrange and woofer, with 110 watts of real hifi power at 4 ohms and 1% THD: 2 x 55W.
- 2 Class AB amplification stages for the tweeter, with hifi power at 4 ohms and 1% THD of 30 real watts: 2 x 15W.
CONTACT
- 269 Chemin De Mentaberrikoborda, 64480 USTARIZ – 05 64 11 54 15
- 41 Rue Sedaine, 75011 PARIS – 01 43 72 53 24
- info@laboiteconcept.com.
- www.laboiteconcept.com.
References
- La Boite concept - Fabricant d'enceintes format mobilier haute-fidélité
- La Boite concept - Fabricant d'enceintes format mobilier haute-fidélité
- Enregistrement | La Boite concept
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>