concept GE2010 2 In 1 Electrical Contact Panini Grill Instruction Manual

: October 27, 2023
: concept

Table of Contents

ACKNOWLEDGEMENT
IMPORTANT SAFETY NOTICE
PRODUCT DESCRIPTION
INSTALLING YOUR GRILL MAKER
Assembly & operation
CLEANUP AND MAINTENANCE
WARRANTY TERMS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GE2010 2 In 1 Electrical Contact Panini Grill
Instruction Manual

ACKNOWLEDGEMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure that any persons handling the vacuum cleaner are also familiar with this Operating Manual.

Technical parameters

Voltage| 220–240 V ~ 50/60 Hz
Power input| 2000 W

Caution! Hot surface

IMPORTANT SAFETY NOTICE

Use the unit only as described in this operating manual.
Remove all the covering and marketing materials from the unit before the first use.
Make sure the mains voltage corresponds to the values stated on the product’s rating plate.
The unit reaches high temperatures during operation and remains hot for some time after being turned off. Do not touch the hot surfaces. Use the handles and buttons. There is a risk of being burned.
The unit may not be cleaned, stored, or covered until it has cooled down completely.
Do not put the unit on its side during operation.
Close supervision is necessary when the unit is on or plugged into the socket.
Never carry the unit during operation or while hot. Do not carry the unit by the power cord.
Never pull the cord to disconnect the plug from the socket; hold the plug instead.
The appliance is not intended for and should not be accessible to children or people with reduced capabilities.
Persons with limited movement capacity, reduced sensory perception, insufficient mental capacity or those who are unaware of the proper handling should use the product only under the supervision of a responsible, aware person.
Pay the utmost attention when using the unit close to children.
Do not use the appliance as a toy.
Turn the unit oﬀ, disconnect the power cord from the wall outlet, and allow the unit to cool before cleaning.
Do not let the power cord hang loosely over the edge of a table. Make sure the power cord does not touch hot surfaces.
The unit may only be installed on a stable surface resistant to high temperature, away from other heat sources, such as heating bodies, ovens, etc. Do not expose the unit to direct sunlight or moisture.
Do not use the unit in an environment with explosive gases or flammable substances (solvents, varnishes, adhesives, etc.).
Caution – Bread may ignite! When using the unit, keep a sufficient space around and above the unit to ensure sufficient air circulation. Do not let the unit come into contact with curtains, wall linings, textile, paper, or other combustible materials while in operation. In addition, it is not recommended to install the unit near or under the above materials. Do not put any of these materials on top of the unit.
Do not use the unit without the removable crumb tray. The tray shall be cleaned regularly. Do not allow crumbs to accumulate on the tray. They could touch the heating body and ignite.
Do not insert any metal objects into the unit.
Do not insert excessively big pieces of food into the unit.
The unit is not designed for outdoor use.
The appliance is intended for domestic use only, not for commercial use.
When unplugging the unit from the wall outlet, make sure the unit has been turned off (bread lowering lever in the upper position), then disconnect the plug from the wall outlet.
Never operate the appliance with wet hands.
Do not immerse the power cord, plug, or appliance in water or any other liquid
Use manufacturer-recommended accessories only.
Do not try to repair the appliance; instead, refer to an authorised service centre.
This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Children must not play with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.

Failure to follow the manufacturer‘s instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

A Handle
B Release Button for cooking plates
C Timer Knob
D Temperature Knob
E Open flat button
F Detachable Cooking Plates (Waffle & Reversible Grill)
G Indicator Light (red)
H Drip Tray
I Thermostat control light (green)

INSTALLING YOUR GRILL MAKER

The grill maker is for indoor use only. Place the unit away from water and do not use it near a swimming pool. Do not expose the unit to rain. The unit must be plugged into an electrical outlet.
Place the grill maker on a flat, stable and heat resistant surface.
Prior to the first use

Clean the plates with a wet soft cloth and then dry the unit.
Connect the grill maker to a grounded electrical outlet.
Set the thermostat knob to the Dark position. Do not place food on the plate.
The device can emit smoke during its first use.
After about 4-5 minutes, turn the appliance off and let it cool down.
Insert the grease collector tray at the back of the device. Now you can use the unit.

Assembly & operation

Waffle Maker

Use the Grill Maker as a Waffle Maker. Simply to use the release button ,,B,, (Fig.1) to assemble the two waffle plates into the unit.
Choose the desired shade setting through the timer knob and temperature knob.
Allow the Waffle Maker to preheat. When the preheating is done, the Green ready indicator is ON.
Add batter to the Waffle Maker. Open the Waffle Maker by using the handle.
Pour approximately 2 cups of waffle batter evenly over the bottom plate.
Use a temperature resistant nylon or wood utensil to spread the batter evenly over the bottom plate.
Remove waffles. When the waffles are done, open the waffle maker and remove the waffles carefully with a heat resistant nylon or wood utensil.

Grill maker/ Pannini maker
The Grill GE2010 is a really versatile piece of kitchen equipment. There are many different ways to use the Griddle and Grill. The first thing you need to do before using the Griddle or Grill is to select which side of the plates you wish to cook with. The flat griddle plates are ideal for pancakes and French toast. The ribbed grill plates are ideal for steaks, kebabs and paninis. You can use 2 grill plates together or 2 griddle plates together or a combination of 1 grill plate and 1 griddle plate.

Connect device with electric network.
Set required temperature (Light = light browning, Dark = dark browning).
When the green light turns off, the grill is ready for use (2-3 min).
When the temperature drops below the set value the green light turns on. When temperature corresponds with set temp. the light turns off again. The process is repeated several times during preparation.

To remove the plates

Ensure the product is unplugged and is fully cooled down.
Locate the plate release buttons which can be found on the right side of the unit
Press the release button, plate will pop up slightly from the base. Lift the plate up and slide out from under the brackets in the centre. Repeat by pressing the lower release button and release lower plate.
The plates can be hand washed or cleaned in the dishwasher after use.

Fully open position
To “PRESS” the button of handle end and push the handle back (see part E in figure 1and 2).
Half open position
The Griddle and Grill can be used in the half open position. To adjust the appliance to this position, simply lift the handle until it comes into the fully upright position. The unit will stay in this position until you close the cover or continue to open it to the fully open position.

concept GE2010 2 In 1 Electrical Contact Panini Grill -
fig2

Slide out drip tray
The fat produced during cooking is drained via a small recess at the rear of the plates, allowing fat and grease to drip down into the integrated tray. The drip tray can be washed in the dishwasher.
Note: The first time you use the appliance, it may have a slight odor and may smoke a little.
When you have finished cooking, unplug the power cord. Allow the appliance to cool for at least 30 minutes before handling.

CLEANUP AND MAINTENANCE

Before first use and after every use, clean each part thoroughly.
Once you have finished cooking, unplug the power cord and allow the appliance for at least 30 minutes before handling.
Dispose of grease from the drip tray. The drip tray can be cleaned by hand or in the dishwasher.
The cooking plates can be washed by hand or in the dishwasher. Do not use metallic objects such as knives when cleaning. This will damage the non stick coating.
Use only wooden or heatproof plastic.
If you have been cooking seafood, wipe the cooking plate with lemon juice to prevent seafood flavour transferring to the next recipe.
Cover and control knobs can be wiped clean with a soft, dry cloth. For tough stains dampen cloth.
Never use an abrasive cleaner.
Never leave plastic utensils in contact with the hot grill / griddle / waffle plates
Make sure all the parts are clean and dry before storing.
Never wrap the cord around the outside of the grill maker.
Never immerse the plug in water or any other liquid.

SERVICE
Any larger maintenance or repairs requiring intervention into the internal parts of the product shall only be performed by an authorized service

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service or in the shop where you bought this product.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.

WARRANTY TERMS

Warranty
The manufacturer (or importer) is responsible for ensuring the product complies with the requirements of applicable legal regulations as well as those of the relevant technical standards. Moreover, they are responsible for ensuring the product has the properties the manufacturer described in documents related to the goods or those reasonably expected by the customer with regard to the nature of the goods or based on advertising produced by the manufacturer, and further they are responsible for ensuring the product is fit for the purpose proposed by the manufacturer or that a product of the same type is normally used for.
The quality warranty term is 24 months from product takeover by the customer.
The warranty does not apply to wear and tear caused by regular use. The customer shall not be entitled to any warranty claims if, prior to taking the product over, they knew the product contained a defect or if the defect is attributable to the customer.
The warranty specifically does not apply:

if the product installation, operation and service conditions stipulated in the product operating manual have not been adhered to,
to malfunctions caused due to mechanical, heat or chemical damage, short circuit, over voltage or incorrect installation,
to malfunctions caused by an inexpert third-party intervention,
to malfunctions caused by natural disaster,
to malfunctions caused by insufficient or inappropriate maintenance in violation of the operating manual, including malfunctions caused by water and other sediments,
to changes in colour of the heating surface or to scratching of the surface caused as a result of using the products in an unusual manner,
to appearance and functional changes caused by exposure to sunlight, thermal radiation of water and other sediments,
if the service life of certain product parts expires, e.g. for accumulators, bulbs, etc.

The warranty does not apply to any products and services provided along with the product (gifts, promotional articles, etc.).
Filing a complaint
A complaint against a product defect must be filed as soon as identified, yet no later than before the end of the warranty term.
The customer must file a product complaint with the dealer from which they have purchased the product, or with any authorised service centre, a list of which is included in the product package, or available at www.my- concept.com.
While filing a product complaint, the product must be duly cleaned and securely packed so as to prevent any damage during its transport to an authorised service centre, where relevant, unless the product is delivered in person.
The customer must submit proof of having concluded a purchase contract for the product by producing the receipt.
While filing their complaint, the customer must indicate the noted defect and identify the preferred complaint application method.
Complaints processing
As long as the noted defect may be removed, the user has the right to have the defect duly removed free of charge on a timely basis.
Where such a procedure is not reasonable with regard to the nature of the defect, the user may require to be supplied a new defect-free product (replacement), or, where the defect applies to a part of the product only, replacement of the part concerned. However, if replacement of the product or any part thereof is not proportionate with regard to the nature of the defect, especially if the defect can be removed without undue delay, the customer has the right to have the defect removed free of charge.
If the noted defect is not removable, or if the customer becomes entitled to replacement of the product or a part thereof, yet the replacement is not possible, for example due to the product having been sold out, the customer has the right to return the product (withdrawal from the contract).
The customer shall have the right to a new product (replacement) or to replacement of a part of the producteven if the defect can be removed, provided they cannot properly use the product due to repeated occurrence of the defect or due to a high number of such defects. In such a case, the customer also has the right toreturn the product (by withdrawing from the contract).
If the product is not returned (the customer does not withdraw from the contract), or if the customer does not apply the right to a new defect-free product (replacement), to replacement of a part thereof or to repair of the product, they may request a reasonable discount. The customer also has a right to a reasonable discount if a new defect-free product cannot be supplied to them, or if a product part cannot be replaced or the product repaired unless the situation is remedied within a reasonable time limit, or if remedying the situation would create major discomfort on the part of the customer.
The seller, authorised service centre or a staff memberauthorised by them must decide about each complaintimmediately or within three business days in complicated cases. This term does not include a reasonable periodof time, depending on the type of product concerned, required for the defect to be assessed by an expert. A complaint, including defect removal, must be dealt with without any undue delay, yet no later than within 30 calendar days of the complaint filing date, unless the seller and the customer agree on a later deadline.
On returning the product (withdrawing from the contract) the customer must return any accessories and documents supplied along with the product.
The customer does not have the right to keep the defective parts and components of the product replaced as part of a repair of the product.
This shall be without prejudice to any other rights the customer may have in relation to the purchase of the product.
Remark: Complaints against products damaged in transport are governed by the carrier’s complaints procedure.

Manufacturer
Jindřich Valenta – Concept
Vysokomýtská 1800, 565 01 Choceň
Czech Republic
tel.: +420 465 471 400
fax +420 465 473 304
Company ID No. 13216660
email:servis@my-concept.cz
www:www.my-concept.com