GATORBACK MUDFLAPS 2022-C Ford Navigator Mud Flap Set Instruction Manual

GATORBACK MUDFLAPS 2022-C Ford Navigator Mud Flap Set Instruction Manual

IMPORTANT:

Manufacturer is not responsible for negligent use of vehicle with mud flaps installed, including
over-tightening of screws and bolts causing damage to vehicle or mud flaps.

TOOLS REQUIRED-

FLAPS

PARTS BAG # 770587

INSTALLATION (For ease of installation it is suggested that the wheel be

removed)

1.  Before you install your Mud Flap Set, see the diagram and parts list for all necessary parts.
2. Remove the four factory push pins located on the inner fender.
3.  Pull back the liner and install spring nuts (e) to the tabs that hold the liner in place.
4.  Hold the mud flap in place and use a marker to mark about 1/4” above the mud flap.
5. Install durastrip (f) from the mark down the edge of the vehicle. This protects the paint and body from the mud flap.
6.  Loosely install mud flap holes #1 to #4 to spring nuts (e) using a capscrew (a) and flat washer (b).
7. . Push the mud flap hole #5 against the factory liner and drill a 1/4” hole through the mud flap hole into the factory liner.
8. . Loosely install mud flap hole #5 to liner using a capscrew (a) and flat washer (b) and secure using a flat washer (b), lockwasher (c) and hex nut (d).
9.  Using a square or another levelling tool, ensure that the mud flap is level. Tighten all fasteners.
10.  Repeat procedure on passenger side.
    

Please check out our YouTube channel to see an install video for this application.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>