TRAN LED VEVE Linear Fixtures Installation Guide
- June 9, 2024
- TRAN LED
Table of Contents
TRAN LED VEVE Linear Fixtures
Mounting
NOTE: 2 clips provided for 4′ or less; 4 clips provided for greater than 4′
Stainless Steel Clip
(SST-01)
|
Magnet Clip
(MG-01)
---|---
| 
HARDWARE
#4 x5/8″ Flat head screw (Included)
#6x 5/8″ Flat head screw (Included)
Magnet Mount Accessory
(MMA)
Screw Mounting
Magnet Mounting
Using the #6 Flat head screws, mount two screws into the 12” magnet bracket through the slotted holes at each end
Attach the magnet clips onto the extrusion
Connect the assembled extrusion and its magnet clips to the magnet bracket, the install should match the section view
NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.
Magnet Mounting
NOTE: Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.
NOTES:
- Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran