RANGER DESIGN 5044 Raised Base for Cab Box Installation Guide
- June 4, 2024
- RANGER DESIGN
Table of Contents
RANGER DESIGN 5044 Raised Base for Cab Box
REQUIRED ITEMS
ASSEMBLY
SETUP
-
Unpack all the components and compare with the bill of materials.
-
Verify all parts are present.
BILL OF MATERIALS
-
Fastener kits.
INSTALLATION
- Place the cab box raiser between the front seats.
- Adjust the position forward or backward to avoid any seat armrests or mechanical handbrake levers.
WARNING: Verify with the vehicle manufacturer before drilling through the floor that no wires, cables or other items are underneath. Adjust the position of the cab box raiser to avoid any items underneath.
- Use the 5 self-drilling screws to secure the cab box raiser to the floor.
- Select the appropriate screw length to use.
INSTALL WITH 5045 CAB BOX
- Place and attach the 5045 Cab Box on the raiser.
NOTE: 5045 Cab Box is a separate unit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>