EMOS V0120 USB PD Network Adapter QUICK Instruction Manual
- June 4, 2024
- EMOS
Table of Contents
EMOS V0120 USB PD Network Adapter QUICK
Please read and follow the instruction manual carefully before using the device.
Description and options
QUICK series charging adapter
QUICK = USB output parameters (V; A; W) are set based on connected
devices up to the maximum values of the adapter; in addition, they enable
quick charging = up to 50 % faster device charging at output voltage (5–12 V
DC) – applies only to compatible devices, e.g. with Qualcomm 2.0–3.0
processors.
The adapter is designed for charging the batteries of compatible devices – see
technical specifications. First connect cable to the adapter and the device,
then plug in to the power supply socket. After charging is complete, unplug
the adapter from socket. Charging speed and charging values are dependent not
only on the output of the adapter but also the quality of the connected cable
and set options/parameters of the device which monitor and adjust charging
values on the input.
Technical specifications
-
input voltage: 100–240 V AC
-
max. USB output:
- first: USB QC 2.0–3.0 (5–12 V DC/1.5–3 A/18 W)
- second: USB-C PD (5–12 V DC/1.5–3 A/18 W)
-
max. total adapter output: 5–12 V DC/1.5–3 A/30 W
protection against overload, overvoltage and short circuit -
LED indication: blue
-
compatibility: smartphones, tablets and other devices
-
dimensions: 91 × 54 × 27 mm (depth × width × height)
-
colour: white
-
weight: 61 g
Care and maintenance
- Do not expose the product to humidity (e.g. in the bathroom) or outdoor weather conditions.
- Designed for use in dry indoor areas.
- Do not use the product in close proximity to IT equipment and other electrical devices.
- This device is not intended for use by children or persons whose phys-ical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised by a person responsible for their safety.
- Clean using a moistened or dry cloth.
Safety instructions
- Ensure the adapter is connected to correct voltage. Voltage exceeding the limits may damage or destroy your device.
- Never try to open or disassemble the product.
- Do not short-circuit the connectors.
- Disconnect the USB adapter from power when it‘s not being used.
- Always turn your device off before you connect it to the adapter and begin charging.
- Charging the device while it‘s on can damage the battery or cause the device‘s firmware to malfunction.
- Prevent improper handling of the device and always observe the principles of using electrical appliances.
Do not dispose of with domestic waste. Use special collection points for
sorted waste. Contact local authorities for information about collection
points. If the electronic devices would be disposed on landfill, dangerous
substanoes may reach groundwater and subsequent-ly food chain, where it could
affect human health.
A declaration of conformity has been issued for this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>