The Home Depot 18d4631 42 Inch Fire Pit Instruction Manual
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot 18d4631 42 Inch Fire Pit
Product Information
Specifications
- Model: JSF1JU
- Parts Check List: 5PPMT3FRVJSFE 1IJMMJQT)FBE4DSFXESJWFS EKVTUBCMF 8SFODI
- Part Description:
- ‘JSF#PXM 4DSFFO-JGUJOH
- 5PPM 4QBSL4DSFFO
- 0VUFS3JOH4FDUJPO
- 4UBOE-FHT )BSEXBSF1BDL cM6x25mm with Nuts x 8pcs, M6x12mmwith Nuts x 9pcs+M6x12mm x 4pcs
Product Usage Instructions
Assembly Instructions
Step 1: Carefully unpack all parts. Inspect for missing parts or damage.
Step 2: Align holes of Fire Bowl (A) with holes of stand Legs (E). Insert short Bolts through holes of Fire Bowl and Legs and attach with Nuts. Attach all three (3) legs to Fire Bowl and securely fasten bolts with screwdriver and wrench.
Step 3: Attach four (4) Outer Ring Sections together by inserting each end together forming ring as shown. Once assembled, place ring around Fire Bowl and align screw holes and attach nuts. Hand tighten nuts only until all bolts are in place. Securely tighten with a screwdriver wrench.
Step 4: Insert screws through the underside of ring at each joint in Outer Ring. Securely fasten with screwdriver.
Step 5: Place Screen on the Fire Bowl.
Step 6: Ensure the product is placed on a non-combustible surface. Read and follow all warnings and safety instructions before using.
General Care
Warning: This Product can expose you to chemicals including Benzene, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
FAQ
Q: Are there any specific safety precautions to keep in mind while using the product?
A: Yes, please ensure the product is placed on a non-combustible surface and follow all warnings and safety instructions provided.
Important!
Please read and follow ALL instructions before assembling or using this
product, particularly the safety statements. Failure to follow instructions
and warnings could result in damage to property, serious injury or death.
WARNING!
- Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life.
- Do not use this unit on or near combustible surfaces or structures such as wood decks, dry leaves or grass, vinyl or wood siding, etc.
- Use on level, non-combustible surface only.
- Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
- Never use flammable accelerants, such as: gasoline, alcohol, paint thinners, kerosene, etc. to start a fire. Serious injury or property damage could result.
- Screen lifting tool may become hot when in use! Failure to wear protective gloves may lead to injury.
- Keep away from house, garage, balconies, or overhangs.
- Avoid using during dry or windy conditions.
- Keep out of reach of children.
- Never leave unit unattended while hot or in use.
- Dispose of cold ashes properly.
Contact local authorities regarding possible burn restrictions before using product.
Parts Check List
Tools Required:
- Phillips Head Screwdriver
- Adjustable Wrench
| Part # | Quantity | Part Description |
|---|---|---|
| A | 1 | Fire Bowl |
| B | 1 | Screen Lifting Tool |
| C | 1 | Spark Screen |
| D | 4 | Outer Ring Section |
| E | 3 | Stand Legs |
| F | 1 | Hardware Pack （M6x25mm with Nuts x 8pcs, M6x12mmwith Nuts x 9pcs+M6x12mm |
x 4pcs）
Assembly Instructions
-
Step 1:
Carefully unpack all parts. Inspect for missing parts or damage. -
Step 2:
Align holes of Fire Bowl (A) with holes of stand Legs (E).
Insert short Bolts through holes of Fire Bowl and Legs and attach with Nuts (Fig 1). Attach all three (3) legs to Fire Bowl and securely fasten bolts with screwdriver and wrench. -
Step 3:
Attach four (4) Outer Ring Sections together by inserting each end together forming ring as shown (Fig 2). Once assembled, place ring around Fire Bowl and align screw holes of fire bowl and ring. Insert the long bolts through screw holes and attach nuts (Fig 3). Hand tighten nuts only until all bolts are in place.\ Securely tighten with screwdriver wrench. -
Step 4:
Insert screws through underside of ring at each joint in Outer
Ring (Fig. 5). Securely fasten with screwdriver. -
Step 5:
Place Screen on the Fire Bowl (Fig 6). -
Step 6:
Your fireplace is now ready for outside use on a level non-combustible surface.
Please read and follow all Warnings and safety instructions before using.
General Care
- Fire bowl may be cleaned with water and mild detergent
- Do not use abrasive detergents or pads to clean surround or fire bowl.
- As with any outdoor grill, periodic maintenance is required toreturn painted steel surfaces to original appearance. Remove anyrust with sandpaper or steel brush and repaint with grill paint suitablefor high-temperature surfaces. Follow manufacturer’s instructions.
- The fire pit and mesh spark screen are painted with a durable high-temperature finish, but rusting will occur over time due to heatand moisture exposure. Rusting may occur more quickly in areas witha higher humidity. Regular maintenance is required to reduce theappearance of rust.
Warning: This Product can expose you to chemicals including Benzene, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov
This limited warranty is applicable to non-commercial residential use only in the United States.This warranty only applies to the functionality of the product, and does not cover cosmetic issues such as dents,scratches,corrosion,surface rust,or the discoloration of surfaces by heat,moisture,or exposure to sunlight.Regular maintenance of steel part is required to maintian appearance.Surface rust,corrosion,or powder paint chipping on steel parts is not considered a manufacturing defect and is not covered under this warranty.