Pro-Ject 252TDSOTM Dark Side Moon Special Edition User Guide

: June 1, 2024
: Pro-Ject

Table of Contents

Pro-Ject 252TDSOTM Dark Side Moon Special Edition
Product Usage Instructions
Setup Guide
Unpack
INSTRUCTION
THE DARK SIDE OF THE MOON
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pro-Ject 252TDSOTM Dark Side Moon Special Edition

Specifications

Model: Limited Edition Turntable
Brand: Pro-Ject Audio Systems
Speeds: 33RPM, 45RPM
Features: Rainbow light with dimmer, Connect it E RCA cable,Alu Sub-Platter

Product Usage Instructions

Setup Guide:

Unpack all items from the upper inlay:
- a) Tracking force gauge
- b) Flat belt
- c) Adapter for 7 singles / Allen keys
- d) Alu Sub-Platter
- e) Connect it E RCA cable
- f) Power supply
- g) Counterweight
- h) ON/OFF switch rod
- i) Cartridge alignment protractor
Remove the upper inlay from the box.
Lift the turntable out of the box.
Unpack the platter and felt mat.
Screw on the ON/OFF switch rod.
Carefully insert the alu sub-platter (d) axle into the bearing.
Wrap the drive belt (b) around the smaller pulley and sub-platter.
Put the platter on the turntable.
The turntable should always be placed on a flat surface. Check with a spirit level*.
If necessary, level the turntable by adjusting the feet.
Remove tonearm twist tie.
Put the counterweight (g) in place.
Remove the stylus protection cover.
Place the stylus on the gauge. The stylus should read 20.
Balance the tonearm by pushing the counterweight forewards and backwards on the rod. Lower the tonearm with the lift.
When the gauge stays level, your tracking force is set correct.
Screw the Counterweight tight using the supplied allen key (c).
Use the switch to turn on the Rainbow light. Turn the dial to dim the light.
Plug in Connect it E (e) and power supply (f). Yellow cable marks to the amplifier. Connect to your hifi-system and Enjoy your music!

FAQ:

Q: Can I use this turntable for commercial purposes?
A: This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.

Q: What should I do if I face technical issues with the product?
A: Feel free to contact us. We have experienced partners all over the world. Find your dealer here: Find a Dealer

Q: Is a spirit level included with the product?
A: A spirit level is not included but can be purchased separately if needed.

Q: What is the warranty policy for this product?
A: The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer.

Setup Guide

Getting started:

Make sure to have enough space to unpack your turntable.
Always unpack and set up in a clean environment.
Please Do NOT throw away the packaging! If you need service or want to return your product, please send it in the original packaging including all inserts. In case of damage due to alternative packaging your dealer cannot guarantee a full refund.
complete manual:
www.project-audio.com/the-dark-side-of-the-moon-turntable

Unpack

Unpack all items from the upper inlay.

a) Trackingforce gauge
b) Flat belt
c) Adapter for 7“ singles / Allen keys
d) Alu Sub-Platter
e) Connect it E RCA cable
f) Power supply
g) Counterweight
h) ON/OFF switch rod
i) Cartridge alignment protractor

INSTRUCTION

Remove the upper inlay from the box.
Lift the turntable out of the box.
Unpack the platter and felt mat.
Screw on the ON/OFF switch rod.h)
Carefully insert the alu sub-platter (d) axle into the bearing.
Wrpulleap the drivy and sube b-plattelt (ber. ) around the smaller
Put the platter on the turntable.
The turntable should always be placed on a flat surface. Check with a spirit level*.
If necessary, level the turntable by adjusting the feet.
Remove tonearm twist tie. $Pro-Ject-252-DSOTM-Dark-Side-Moon-Special-Edition-Fig- $6$$
Put the counterweight (g) in place.
Remove the stylus protection cover.
Place the stylus on the gauge.
The stylus should read 20.
Balance the tonearm by pushing the counterweight forewards and backwards on the rod. $Pro-Ject-252-DSOTM-Dark-Side-Moon-Special-Edition-Fig- $8$$
When the gauge stays level, your tracking force is set correct.
Screw the Counterweight tight. Use the supplied allen key. (c) $Pro-Ject-252-DSOTM-Dark-Side-Moon-Special-Edition-Fig- $9$$
Use the switch to turn on the Rainbow light. Turn the dial to dim the light.
Plug in Connect it E (e) and power supply (f).
Yellow cable marks to the amplifier.
Connect to your hifi -system and Enjoy your music!

THE DARK SIDE OF THE MOON

LIMITED EDITION TURNTABLE

Need help?
Feel free to contact us. We have experienced partners all over the world. Find your dealer here: www.project-audio.com/en/find-a-dealer/

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them

separately: lid, counterweight, anti-skating weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.

Warranty: Terms and Conditions

A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
A warranty is only valid for the original owner. It is not transferable.
To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.

A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:

Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads,drive belts and cartridges.
Damages caused by incorrect installation, connection or packing.
Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
Damages caused by faulty or unsuitable ancillary equipment.
Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of
Pro-Ject Audio Systems and its appointed distributors.
Products where the serial number has been altered, deleted, removed or made illegible.
Repairs or modifications that have been executed by an unauthorized person.

Commercial Use
Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.

Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2023. All rights reserved.

The information, pictures and figures were correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.