Pro-Ject AUDIO SYSTEMS Debut PRO S Turntable Instruction Manual
- October 27, 2023
- Pro Ject AUDIO SYSTEMS
Table of Contents
Pro-Ject AUDIO SYSTEMS Debut PRO S Turntable
Debut PRO S Setup Guide
Getting started
-
Make sure to have enough space to unpack your turntable.
-
Always unpack and set up in a clean environment.
-
Please Do NOT throw away the packaging! If you need service or want to return your product, please send it
in the original packaging including all inserts. In case of damage due to alternative packaging, your dealer cannot guarantee a full refund. -
complete manual: www.project-audio.com/en/product/debut-pro-s
- Unpack all items from accessory bag:
- Anti Skating Weight
- Flat belt (33 RPM) and round belt (78 RPM)
- Adapter for 7“ singles / Allen keys
- Connect it E RCA cable
- Gauge for tracking force setting
- Cartridge alignment protractor
- Remove dust cover carton from the box.
- Lift the wrapped turntable out of the box.
- Carefully remove the protective cover.
- Unpack power supply, record puck and counterweight from the bottom inserts.
- Unpack the platter.
- Put the flat drive belt (b) on the pulley and sub-platter.
- Put the platter on the turntable.
- The turntable should always be placed on a flat surface. Check with a spirit level*.
- If necessary, level the turntable by adjusting the feet.
- Remove tonearm twist tie.
- Screw the counterweight in place.
- Put the gauge (e) on the platter.
- Place the stylus on the gauge, so your stylus sits on the point marked “23”.
- Balance the tonearm by turning the counterweight forwards and backwards on the rod.
- When the gauge stays level, your tracking force is set correctly.
- Put the loop of the Anti Skating Weight (a) in the outer notch on the tonearm post.
- Plug in power supply and Connect it E (e). Yellow marks should be at the amplifier end.
- Install the dustcover.
- Use the rocker-switch on the bottom left to select the playback speed.
- Connect to your hifi-system and have fun with music!
Debut PROS
Need help?
Feel free to contact us. We have experienced partners all over the world. Find
your dealer here: www.project-audio.com/en/find-a-dealer/
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country. Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging. Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt. Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.
Warranty: Terms and Conditions
- A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
- This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
- Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
- A warranty is only valid for the original owner. It is not transferable.
- To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
- Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
- The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
- Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
- Damages caused by incorrect installation, connection or packing.
- Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
- Damages caused by faulty or unsuitable ancillary equipment.
- Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
- Products where the serial number has been altered, deleted, removed or made illegible.
- Repairs or modifications that have been executed by an unauthorized person.
Commercial Use
Faults caused due to using domestic products in commercial environments or on
commercial scales are not covered by warranty. This turntable is intended for
domestic use only. Using them for business applications are done so at your
own risk. Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems Copyright © 2022. All
rights reserved. The information, pictures and figures were correct at the
time of going to press. The manufacturer reserves the right to make changes to
the techni-cal specification without prior notice as deemed necessary to
uphold the ongoing process of technical development.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>