Joie Spin 360TM Child Restraint To Vehicle Fit Instructions
- June 1, 2024
- Joie
Table of Contents
Joie Spin 360TM Child Restraint To Vehicle Fit
Product Information
Specifications
Product Name: Spin 360TM GT Child Restraint
- Usage: Semi-Universal or ISOFIX child restraint system
- Approval: UN Regulation No.44 series of amendments
- Mass Group: Child weighing under 18kg
- Materials: Plastics, metal, fabrics
- Patent Number: Pending
Product Usage Instructions
Vehicle Fitting Information
The child restraint is suitable for use in vehicles with ISOFIX anchorages
systems. It can be fixed into most cars’ seat positions approved as ISOFIX
positions. Refer to the vehicle handbook for specific details.
ISOFIX Size Class
The device is intended for ISOFIX size classes A, C, D.
Installation Guidelines
- Always prioritize the rear seats of your vehicle.
- Avoid using the child restraint on a front seat with an active airbag when installed in rear-facing mode.
- If the vehicle has underfloor storage boxes, refer to the owner’s manual and contact the vehicle manufacturer for installation guidance.
Additional Information
If unsure about compatibility with your vehicle, consult the child
restraint manufacturer or retailer. Always follow safety guidelines and
instructions provided in the manual.
FAQ
-
Q: Can the child restraint be used in all vehicles?
A: The child restraint is suitable for most cars with approved ISOFIX positions. Refer to the vehicle handbook for specific details or consult the manufacturer for guidance. -
Q: What should I do if my vehicle has underfloor storage boxes?
A: Vehicles with underfloor storage boxes may have specific considerations for child restraint installation. Check the owner’s manual and contact the vehicle manufacturer for guidance to ensure proper installation.
spin 360™
spin 360™ GT
child restraint
check my fit in your car
child restraint-to-vehicle fit guide
scan here to check the most up to date list
Vehicle Fitting Information
- The child restraint is classified for “Semi-Universal” or ISOFIX child restraint system use. It is approved to UN Regulation No.44 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems. It is suitable to fix into seat positions in most cars. The numbers on the diagram below correspond with the vehicle fitting positions listed in the following pages.
- It will fit vehicles with positions approved as ISOFIX positions (as detailed in the vehicle handbook), depending on the category of the child restraint and of the fixture.
- The ISOFIX size class for which this device is intended is : A, C, D.
- Suitable for: Child weighing under 18kg
- Mass Group: Group 0+/1
- Materials: Plastics, metal, fabrics
- Patent No.: Patents pending
- Seat positions in other cars may also be suitable to accept the child restraint. If in doubt, consult either the child restraint manufacturer or the retailer.
- ALWAYS give priority to the rear seats of your vehicle.
- Don’t use it on front seat with active airbag when installed in rear facing mode.
- If your child restraint can be fitted, it is marked with
- If your child restraint cannot be fitted, it is marked with
- If the vehicle is equipped with underfloor storage boxes, these positions are marked with ! – If in doubt always check the owner manual first and contact with vehicle manufacturer for the child restraint installation may not fully meet all requirements.
- Vehicles with underfloor storage boxes are marked with
- Electric or hybrid vehicles are marked with
- If your vehicle is not listed in this manual or it is not marked with either a or then please refer to your vehicle’s handbook or contact the manufacturer for further information.
Additional Information **
**
Toyota
Vauxhall
Allison Baby UK Ltd,
Venture Point, Towers Business Park Rugeley, Staffordshire, WS15 1UZ
NUNA International B.V.
Van der Valk Boumanweg 178 C, 2352 JD Leiderdorp, The Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>