MARVO GT-64 PS4 Wireless Gamepad Installation Guide
- June 9, 2024
- MARVO
Table of Contents
MARVO GT-64 PS4 Wireless Gamepad
TECH SPECS
- Connection: wireless or wired (USB cable)
- Wireless versions: V4.2
- Buttons: 15
- Battery capacity: 600 mA
- Speaker: 6/80-1W
- Interface: EXT support, 3.5 mm jack
- Compatibility: PS4 and *PC
- Compatibility: PS4 and *PC (D-INPUT/X-INPUT/PS3)
- Sensor: 3D-Sensor, G-Sensor
PRODUCT PRESENTATION
FEATURES
- Wireless gamepad with built-in battery
- Double vibration effect
- Big blue LED light bar
- Wired mode (X-input) available on PC
- Motion sensor: 3D-Sensor + G-Sensor
- 3.5 mm stereo headset jack support
SYSTEM REQUIREMENTS
PC system or compatible with one USB port available and Windows 7 or newer
operating system, PS4, and *PC (D-INPUT/X-INPUT/PS3) device.
SAFETY NOTES
- Keep the equipment dry. Keep away from precipitation, humidity, all types of liquids and condensation
- Do not use the product with wet hands.
- Do not use or store the equipment in dusty or dirty areas.
- Do not store the equipment under high-temperature or low-temperature conditions (this may damage it).
- Do not drop, knock or shake the equipment as it may damage it
INSTALLATION
Cl PS4/ PS3 Connection
When the gamepad is not connected to the current PS4/ PS3 host, you first need
to use a USB cable to communicate with the PS4/ PS3 host. When the USB is
connected, press the PS button, the LED will be on and the main unit will be
connected.
C2. PC Connection
The gamepad is supported by USB cable. D-input, X-input are automatically
recognized for plug and play; On power up, the default is D-input. To switch
to X-input mode, you can switch by pressing and holding the SHARE and TOUCH
for 3 seconds.
USE
PS4 & PC Key functions
3D-Sensor and G-Sensor
X axis:
The acceleration motion of the X axis (X+/X-direction motion) is: left—>
right, right—> left;
Y-axis: Acceleration motion of the Y-axis (Y+/Y-direction motion), the
action is: front—>back, back—>front;
Z axis: acceleration motion of Z axis (Z+/Z-direction motion), the action
is: up—> down, down —> up;
Roll axis (left and right tilt): The Y axis is tilted left and right as
the center axis, and the action is: horizontal—> left tilt, horizontal—> right
tilt;
Pitch axis (tilt back and forth): rotates back and forth with the X axis
as the center axis. The action is: horizontal—> front tilt, horizontal—> rear
tilt.
Yaw axis: (left and right rotation): The left and right rotations are
centered on the Z axis. The actions are: horizontal—> left rotation,
horizontal—> right rotation.
TROUBLESHOOTING
If the gamepad does not vibrate or it is not recognized, please check that the
game you are trying to play supports vibrations effects.
In case of incorrect operation follow the steps below:
- Check the integrity of the connectors;
- Check the connection to the device;
- Check your device settings;
- Disconnect and reconnect the equipment; restart the device.
If the problem persists, please contact your local seller.
GENERAL INFORMATION
-
Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
-
This product is safe and complies to EU requirements.
-
This product is manufactured conforming with the European Ro HS standard.
This standard was introduced to reduce the amount of electrical and electronic waste emitted into the atmosphere. -
Using the WEEE symbol (the crossed-out bin) indicates that this product is not household waste. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.
Warranty Card
Product Model: __ _
Product Serial No: __ _
Date of Purchase: __
Customer Name:
TEL: ____ Address: ____ _
Distributor Name: __
TEL: ____ _
Warranty Card is the important certificate for after-sale service of Marva
products, please keep it safe.