eSSL JS-32E Proximity Standalone Access Control User Manual

June 5, 2024
eSSL

eSSL - logoJS-32E Proximity Standalone Access Control
User Manual

Description

The device Is a standalone access control and proximity card reader which supports EM & MF card types. It builds in STC microprocessor, with strong anti-interference ability, high security and reliability, powerful function, and convenient operation. It’s widely used in high-end buildings, residential communities, and other public places.

Features

Ultra-low Power Standby current is less than 30mA
Wiegand Interface WG26 or WG34 input and output
Searching time Less than 0.1s after reading the card
Backlight keypad Operate easily at night
Doorbell interface Support external wired doorbell
Access ways Card, Pin code, Card & Pin code
Independent codes Use codes without related card
Change codes Users can change codes by themselves
Delete users by card No. The lost card can be deleted by the keyboard

Specifications

Working Voltage: DC12-24V Standby Current: 30mA
Card Reading Distance: 2 — 5cm Capacity: 2000 users
Working Temperature: -40°C —60°C Working Humidity: 10%-90%
Lock output load: 3A Door Relay time: 0-99S (Adjustable)

Installation

Drill a hole according to the size of the device and fix the back shell with the equipped screw. Thread the cable through the cable hole. connect the wires according to your required function, and wrap the unused wires to avoid short circuits. After connecting the wire, install the machine. (as shown below)

Wiring

Color ID Description
Green DO Wiegand Input(Wiegand Output in Card Reader Mode)
White D1 Wiegand Input(Wiegand Output in Card Reader Mode)
Yellow OPEN Exit Button input terminal
Red +12V 12V + DC Regulated Power Input
Black GND 12V – DC Regulated Power Input
Blue NO Relay normally-on terminal
Purple COM Relay Public terminal
Orange NC Relay normally-off terminal
Pink BELL A Doorbell button one terminal
Pink BELL B Doorbell button to the other terminal

Diagram

Common Power Supply

eSSL JS-32E Proximity Standalone Access Control - figure
2

Special Power Supply

eSSL JS-32E Proximity Standalone Access Control - figure
3

Reader Mode

eSSL JS-32E Proximity Standalone Access Control - figure
4

Sound & Light indication

Operate Status LED Light Color Buzzer
Standby Red
Keypad Beep
Operation Successful Green

Beep —
Operation Failed| | Beep-Beep-Beep
Entering into Programming| Flash Red Slowly|
Beep —
Programmable Status| Orange|
Exit Programming| Red|
Beep —
Door Opening| Green| Beep-

Advance setting

Master Card Operation

Add Card
Read master add a card
Read master add a card
Read the 1st user card
Read the 2nd user card

Note: The master add card is used to add card users continuously and quickly.
When you read the master add card for the first time, you will hear a short “BEEP” sound twice and the Indicator light tums orange, it means you have entered Into add user programming. When you read the master add a card for the second time, you will hear a long “BEEP” sound once and the Indicator light tums red, which means you have exited the add user programming.

Delete Card
Read master delete card
Read the Pt user card
Read master delete card
Read the 2nd user card

Note: The master delete card is used to delete card users continuously and quickly.
When you read the master delete card for the first time, you will hear a short “BEEP” sound twice and the indicator light turns orange, it means you have entered into delete user programming, When you read the master delete card for the second time, you will hear long “BEEP” sound once, the indicator light turns red, it means you have exited the delete user programming.

Data Backup Operation

Example: Backup Iha data of machine A to machine B
The green wire and white wire of machine A connect with the green wire and white wire of machine B correspondingly, set B for receiving mode at first, then set A for sending mode, the indicator light turns green flash during the data backup, data backup is successful when indicator light tums red.

http://goo.gl/E3YtKI

#24, Shambavi Building, 23rd Main, Marenahalli, JP Nagar 2nd Phase, Bengaluru – 560078
Phone : 91-8026090500 | Email :sales@esslsecurity.com
www.esslsecurity.com

Documents / Resources

| eSSL JS-32E Proximity Standalone Access Control [pdf] User Manual
JS-32E, Proximity Standalone Access Control, Standalone Access Control, Access Control
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals