joie calmi lie-flat car cotcalmi lie-flat car cot Instruction Manual

joie calmi lie-flat car cotcalmi lie-flat car cot Instruction Manual

Welcome to Joie™
You have purchased a high quality, fully certified child safety child restraint. This product is suitable for the use of children with height 40cm70cm/weight≤9kg.
Keep this instruction manual for future reference.

This product complies with the European standard the UN Regulation No.129, This is the Integral Specific vehicle ISOFIX Enhanced Child Restraint System. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

Emergency

In case of emergency or accidents, it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information

1. This is an Integral Specific vehicle ISOFIX Enhanced Child Restraint System.
2. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
3. calmi lie-flat car cot has to be installed on i-Base lx 2 or i-Base Encore when use in car.
   Materials Plastics, metal, fabrics
   Patent No. Patents pending

WARNING: CAREFULLY read the warnings given in the separate Safety Manual to ensure a secure usage of the product.

Child Usage Requirements

This product is suitable for use with children who meet the following requirements:

calmi + i-Base lx 2
| Child height 40cm-70cm/ Child weight ≤9kg

Product Set Up

see images 1 – 3

1. This enhanced child restraint system is only suitable for vehicle seats equipped with ISOFIX anchorage points. 1
2. DO NOT install this enhanced child restraint on vehicle seats that face sideways or rearward with respect to the moving direction of the vehicle.
3. Please refer to your vehicle owner’s manual for recommended or suggested installation positions. 2
4. This enhanced child restraint must be installed on the rear vehicle seat. 3
5. DO NOT install this enhanced child restraint on movable vehicle seats during installation.

Product Use

Base Installation

see images 4 – 8

1. Attach the ISOFIX guides to the vehicle’s ISOFIX anchor points (see vehicle owner’s manual). 4 The ISOFIX guides can protect the surface of the vehicle seat from being torn. They can also guide the ISOFIX connectors.
2. Unfold the load leg from storage compartment. 5
3. Press the ISOFIX adjustment button to adjust the ISOFIX connectors. Line up the ISOFIX connectors with the ISOFIX guides, and then click both ISOFIX connectors into the ISOFIX anchor points. 6
   • Make sure that both ISOFIX connectors are securely attached to their ISOFIX anchor points. There should be two audible clicks and the colors of the indicators on the both ISOFIX connectors should be completely green. 6 -3
   • Check to make sure the base is securely installed by pulling on the both ISOFIX connectors.
4. After placing the base on the vehicle seat, extend the load leg to floor 7 , When the load leg is installed correctly, the load le indicator will show green. Red will be shown when installed incorrectly. 7 -3
   • The load leg has multiple positions. When the load leg indicator shows red this means the load leg is in the wrong position.
   • Make sure the load leg is in full contact with the vehicle floor pan.
   • Squeeze the load leg adjustment button, then shorten the load leg upwards.
5. The completely assembled base is shown as 8
   • The ISOFIX connectors must be attached and locked onto the ISOFIX anchor points. 8 -1
   • The load leg must be installed correctly with green indicator. 8 -2

Attaching Lie-flat car cot to the Base

see images 9 – 16

1. Pull up the canopy as illustrated while pressing the buttons on both sides. 9
2. Check to make sure the handle is secure before placing the child in the lie-flat car cot. 10 -1
   • Make sure that the handle is in the correct position of use before carrying or lifting.
3. Install the lie-flat car cot onto the base 11, the child restraint indicators should turn green when the lie-flat car cot and base are securely connected. 12
   • Please check that the mesh at the bottom of the lie-flat car cot is fixed properly before installing lie-flat car cot. 11
   • Check that the lie-flat car cot is locked onto the base by lifting the handle.
4. Press the ISOFIX adjustment and push the base back until it comes in contact with the vehicle seat backrest.
5. To remove the lie-flat car cot, squeeze the infant carrier release button on the base 13 -1, then lift the lie-flat car cot up. 13 -2
6. When lie-flat car cot is installed on base, the correct installation is shown in 14. The incorrect installation is shown in 15.
7. To remove the base from the vehicle seat, push the secondary lock buttons 16 -1 first and then press the ISOFIX releasing buttons 16 -2 on the ISOFIX connectors before removing the base from the vehicle seat. 16

Allison Baby UK Ltd,
Venture Point, Towers Business Park
Rugeley, Staffordshire, WS15 1UZ
NUNA International B.V.
Van der Valk Bourmanweg 178 C,
2352 JD Leiderdorp, The Netherlands

References

• Baby Gear That Goes Above & Beyond | Joie

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>