LOREX U471AA Series 2K Wire Free Camera User Guide

2K Wire-Free Camera

U471AA Series

Quick Setup Guide

lorex.com

Camera Safety Precautions

• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Operate the camera within the specified temperature, humidity and voltage and use manufacturer approved accessories.
• Do not disassemble the camera.
• Do not point the camera directly at the sun or a source of intense light.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.

Battery Safety Precautions

Refer to the battery safety rules insert.

Disclaimers

• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working.
• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws.

Attention

A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this bundle (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.

Thank you for your purchase!

How to get started with your 2K Wire-Free Camera

1 Package Contents

Wire-Free Camera (x1)            Battery Pack (x1)

6.6ft (2m) Power Cable (x1)     Mounting Bracket (x1)

Anchors (x3) Screws (x3)         Mounting Template (x1)

Mounting Plate (x1)

2 Before You Start

The camera battery comes partially charged (due to safety regulations). Please fully charge the battery prior to use, and before you begin your setup. This will take 4-6 hours.

To charge the battery pack:

1. Use the power cable to charge the battery.
2. When fully charged, the battery status indicator will turn green.

Red – Battery low                   Green – Battery fully charged

3 Overview

FRONT                                    BACK

1. Warning light
2. Status indicator
3. Microphone
4. Light sensor
5. Speaker
6. Power port
7. Threaded insert (for mounting)
8. Pairing / reset button
9. Bottom cover

4 Status Indicator

5 Pairing to the Hub

1. Download the Lorex Home app by scanning the QR code.
2. Open the Lorex Home app, and sign in or create an account.
3. Tap beside the Hub device and follow the in-app instructions.
4. Once the camera is set up, re-install the bottom cover by carefully aligning the arrow and the unlock symbols. Push and twist the bottom cover clockwise to lock.

Optional: Charging inside the camera

1. Use the power cable to connect to the camera’s power port.
2. Plug into a power outlet until the camera’s status indicator is solid green.

A Power port

Ensure you update to the latest app and device firmware version.

6 App Live View

1. Play back recorded videos
2. Viewing modes
3. Pause/play
4. Camera settings
5. Video quality SD/HD
6. Fullscreen view
7. Audio on/off

7 App Device Management

1. Privacy mode (all cameras)
2. Hub settings
3. Add camera
4. Remove camera
5. Wi-Fi strength indicator
6. Battery status indicator
7. Notification indicator
8. Privacy mode indicator

8 Placement

• Place the camera on any flat surface or mount it to a wall.
• Do not place the camera near air conditioners and other air outlets.
• Install the camera at the recommended angle and height per the guidelines below.

To optimize motion detection accuracy when:

Mounted on a wall
Distance Optimal accuracy for objects within 6.5ft to 32ft (2~10m).
Angle Angle the camera around 15°-30° down from the level position.
Height Install the camera between 7-10ft (2~3m) off of the ground.

Placed on a shelf
Distance Optimal accuracy for objects within 5-32ft (1.5~10m).
Angle Make sure the flat surface/shelf is not obstructing the camera’s field of view.
Height Place the camera between 4.5ft to 6.5ft (1.4~2m) off of the ground.

Note: Accuracy of person detection will be influenced by multiple factors, such as the person’s distance from the camera, the height of the person, and the height and angle of the camera. Night vision will also impact the accuracy and distance of detection.

9 Mounting

1. Camera
2. Adjustable nut
3. Mounting bracket
4. Screws
5. Mounting plate
6. Anchors (Optional)
7. Mounting template
8. Mounting surface

To install the camera:

1. Place the mounting template on the desired location.
   Optional: Drill 7/32″ (5.5mm) holes for the anchors.

2. Align the arrows of the mounting plate and template. Using a Philips screwdriver and the provided screws, secure the mounting plate to the surface.

3. Align the arrows between the mounting bracket and plate. Push the bracket in to install, then slide down to lock in place. You will hear a ‘ click ‘ when the bracket is installed.

4. Attach the camera to the mounting bracket using the thread insert at the rear of the camera. Rotate the camera clockwise until attached, then tighten into place with the adjustable nut.

5. Adjust the camera to the desired angle.

Note: If the camera is not holding in place or difficult to adjust, slide the bracket up to detach from the mounting plate. Tighten or loosen the 3 screws at the back of the mounting bracket to adjust accordingly. Repeat steps 3-5 to re-install.

Back – Mounting bracket

A Adjustable screws

Need help?

Visit help.lorex.com for up-to-date information and resources:

• Download product guides
• Watch how-to-videos
• Find related troubleshooting tips & FAQs

Register your product

Please see our full Terms of Service and Limited Hardware Warranty Policy at lorex.com/warranty.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Copyright © 2021 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

U471AA-Series_QSG_TRILINGUAL_R1

References

• Lorex Technical Support | LOREX Support
• Security Cameras - Home Security Camera Systems | Lorex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>