SonoFF SNZB05P Zigbee Water Leak Sensor User Guide
- June 1, 2024
- SonOFF
Table of Contents
SNZB-
05P
Quick Guide V1.0
Zighee Water Leak Sensor
SNZB05P Zigbee Water Leak Sensor
- Download the eWeLink App & Add SONOFF Zigbee gateway
- Scan QR Code to Add Device
Open the eWeLink App and scan the QR code on the device, then
follow the instructions given by the app to proceed. 
Effective Communication Distance Verification
Install the device in the desired place, then press the Pairing button on the
device. The LED indicator flashes twice means the device and the device under
the same Zigbee network (the router device or hub) are in the effective
communication distance.
Usage illustration with water leak detection cable **
**
One device paired with one water leak detection cable:
One device paired with multiple water leak detection cables:
- In high humidity conditions, the water leak detection cable may trigger leak detection.
- After detecting water immersion, please thoroughly dry the water immersion line before reusing it.
Install battery
User Manual
https://sonoff.tech/usermanuals
Enter the website provided above to view the User Manual for the device.
FCC compliance statement
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SAR Warning
Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
ISED Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES – 003(B).
This device complies with RSS – 247 of Industry Canada. Operation is subject
to the condition that this device does not cause harmful interference. :
ISED Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20
cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd declares that the radio
equipment type SNZB-05P is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://sonoff.tech/compliance/
For CE frequency
EU Operating Frequency Range
Zigbee : 2405-2480 MHz
EU Output Power
Zigbee<10dBm
Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000
Website: sonoff.tech
Service email: support@itead.cc
MADE IN CHINA
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin / button cell battery.
If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types).
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
WEEE Disposal and Recycling Information
**** All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>