SONOFF B02-F-A60 Wi-Fi Smart LED Filament Bulb User Manual
- October 30, 2023
- SonOFF
Table of Contents
SONOFF B02-F-A60 Wi-Fi Smart LED Filament Bulb
Operating Instruction
Install the device
To avoid electric shock, please turn off the power before installing the
device.
The device works under 220-240V AC only.
Download APP
|
Android™ & iOS
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the first use. The device enters the “breathing mode”.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please press the manual switch three times repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON). The “breathing mode” indicates the light enters quick pairing mode.
Add the device
Add the device
Tap “+” and select “ Quick Pairing ”, then operate following the
prompt on the app.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair.
- Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-Off-ON- Off-ON-Off-ON-Off-ON) when the light is on. The “quick flash” indicates the device enters the compatible pairing mode.
- Tap “+” and select “ Compatible Pairing Mode ” on APP.
Select Wi-Fi SSID with ITEAD-** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
Usage of being an ordinary bulb
Power on the bulb, it will enter quick pairing mode (The bulb change from bright to dim and cycle the mode), after 10s, if power off, it will go solid and keep warm light at the highest brightness.
Specifications
| Model | B02-F-A60/B02-F-ST64 |
|---|---|
| Input | 220-240V AC 50Hz |
| Luminous Flux | B02-F-A60: 806Lm / B02-F-ST64: 700Lm |
| Color temperature | B02-F-A60: 2200K-6500K / B02-F-ST64: 1800K-5000K |
| Rated power | 7W |
| Lamp base | E27 |
| CRI | ≥Ra80 |
| Life Expectancy | 15000h |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Operating systems | Android & iOS |
| Dimension | B02-F-A60: 60x104mm / B02-F-ST64: 64x138mm |
| Weight | B02-F-A60: 35g / B02-F-ST64: 50g |
Product Introduction
Features
SONOFF LED is a LED smart bulb that allows users to adjust the brightness and color, and remotely turn on/off the connected devices via your smartphone, schedule it on/off and share it to your family to control together.
-
Remote Control
-
Single/Countdown Timing
-
Voice Control
-
Share Control
-
Smart scene
-
Sync Status
-
Stepless dimming
-
Scene Mode
-
Camera Feature
-
Group control
Factory Reset
Press the light switch 3 times repeatedly at an interval of every 1s (Off-ON- Off-ONOff-ON) when the light is on. The “breathing mode” indicates the device enters the quick pairing mode (Touch).
Please reset the device to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.
Common Problems
Why my device stays “Offline”?
① Maybe you have entered a wrong Wi-Fi password.
② Maybe there’s too much distance between the switch your router or the
environment causes interference, consider getting close to the router. If
failed, please add it again.
③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz
wireless network.
④ Maybe the MAC address filtering is open. Please turn it off. Features
Smart scene
If none of the above methods solved the problem, you can open the mobile
datanetwork on your phone to create a Wi-Fi hotspot, then add the device
again.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio
equipment type B02-F-A60/B02-F-ST64 is in compliance with Directive
2014/53/EU.The full text of the EU declaration of conformity is available at
the following internet address:
https://sonoff.tech/usermanuals
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>