SEALEY AK481 Release Pistol Grip Grease Gun Instruction Manual

SEALEY AK481 Release Pistol Grip Grease Gun

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
• Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.
• Keep the work area clean, and uncluttered, and ensure there is adequate lighting.
• Keep the grease gun clean for the best and safest performance.
• Check moving parts alignment regularly.
• DO NOT use the grease gun for any purpose other than what it was designed for.
• DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.
• When not in use store in a safe, dry, childproof location.
• WARNING! Always wear approved eye protection when operating the grease gun.

INTRODUCTION

Pistol-style grease gun with contoured handle. Highly durable die-cast aluminum alloy pump head with air-bleed valve. Fitted with an innovative quick-release mechanism to speed up the refill process. Features 3-way fill with cartridge, bulk, or manual capability. Supplied with a rigid delivery tube and push-on hydraulic 4-jaw coupling. Accepts standard 400g cartridges.

SPECIFICATION

OPERATION

WARNING! An empty grease cartridge or grease may be under pressure from the spring in the barrel, use caution when removing it.

GREASE GUN LOADING

• Raise quick release mechanism cover (fig.1) and depress and hold the trigger.
• Separate the gun head from the grease gun barrel.

CARTRIDGE LOADING

• Withdraw the plunger rod fully.
• Remove the plastic cap from the end of the grease gun cartridge, and insert it into the barrel of the grease gun.
• Remove the seal from the grease gun cartridge and mount the grease gun head back onto the barrel.
• Depress the air vent valve (fig.2).
• Release the plunger rod using its tab, force the rod out, and a few times eject air trapped in the grease via the air vent valve. When the grease comes out of the valve, the air has been discharged.
• Pump the grease gun handle until the grease flows continuously. If it does not, depress the air vent valve again and use the plunger rod to expel the trapped air.

SUCTION LOADING

• Put the open end of the grease barrel into the grease container to a depth of 50mm.
• Slowly pull back the plunger handle (fig.1) to pull the grease into the barrel. Lock the rod with the tab (fig.1).
• Shake the grease gun to settle the grease into the barrel.
• Mount the grease gun head back onto the barrel, and depress the air vent valve (fig.2).
• Release the plunger rod using its tab, force it out, and in a few times to eject air trapped in the grease, from the air vent valve. When grease comes out of the air vent valve the air has been discharged.
• Pump the grease gun handle until the grease flows continuously. If it does not, depress the air vent valve and use the plunger rod to expel the trapped air.

FILLER PUMP LOADING

• Connect the delivery mechanism from the dispenser to the gun head filler plug (fig.2).
• Check that the bulk filler valves are compatible with the gun filler plug.
• Wipe both the valves clean of any dirt before filling.
• Connect the bulk filler valve to the grease bulk filler pump, keeping weight on the grease gun to keep it connected.
• Pumping becomes very hard once the grease gun barrel is filled.
• Depress the air vent valve to release any trapped air by releasing the plunger rod using its tab and pushing it in and out a few times to eject air trapped in the grease, from the air vent valve.
• When grease comes out of the air vent valve, the air has been discharged.
• Pump the grease gun handle until the grease flows continuously. If it does not, depress the air vent valve and use the plunger rod to expel the trapped air.

USING THE GUN

• The coupler has jaws that snap onto a grease valve. Push the coupler straight onto the valve to form a good fit.
• Operate the grease gun as squarely onto the valve as possible.
• Once finished filling, tilt the coupler, twist it, and pull it off.
• WARNING! DO NOT try to pull the coupler off straight.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and parts without prior notice. If you require documentation for alternative versions, please email or call our technical team at technical@sealey.co.uk or 01284 757505.
IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>