PHILIPS BGP292 LumiStreet gen2 LED Light Instructions
- March 21, 2024
- Philips
Table of Contents
PHILIPS BGP292 LumiStreet gen2 LED Light
Introduction
Lumi Street gen2 Mini, LED module 7500 lm, 740 neutral white, Safety class I, Distribution extra wide 10, Side-entry for diameter 48 to 60 mm
Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of Lumi Street has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. Lumi Street gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
General Information
Lamp family code| LED75 [LED module 7500 lm]
Light source replaceable| Yes
Number of gear units| 1 unit
Driver included| Yes
Remarks| * At extreme ambient temperatures the luminaire might
automatically dim down to protect components
Light source engine type| LED
Service tag| Yes
Product family code| BGP 292 [Lumi Street gen2 Mini]
Lighting Technology| LED
Valkyrie ladder| Specification
---|---
CE mark| Yes
Warranty period| 5 years
Flammability mark| For mounting on normally flammable surfaces
ENEC mark| ENEC plus mark
EU RoHS compliant| Yes
Serviceability class| Class A, luminaire is equipped with serviceable
parts (when applicable): LED board, driver, control units, surge protection
device, optics, front cover and mechanical parts
Light Technical
Upward light output ratio| 0
Luminous Flux| 6,612 lm
Standard tilt angle postop| oo
Standard tilt angle side entry| oo
Correlated Color Temperature (Norn)| 4000 K
Luminous Efficacy (rated) (Norn)| 150 lm/W
Color rendering index (CRI)| 70
Light source color| 740 neutral white
Optical cover type| Flat glass
Luminaire light beam spread| 150° – 43° X 67°
Optic type outdoor| Distribution extra wide 10
Operating and Electrical
Input Voltage| 220 to 240 V
Line Frequency| 50 to 60 Hz
Inrush current| 47 A
Inrush time| 0.25 ms
Power Consumption| 44W
Power Factor (Fraction)| 0.98
Connection| 2 Push-in connector 5-pole
Cable| –
Number of products on MCB of 16 A type B| 10
Temperature
Ambient temperature range| – 40 to+50°C
Controls and Dimming
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating
Control interface| –
Constant light output| No
Mechanical and Housing
Housing Material| Aluminum die cast
Reflector material| Polycarbonate
Optic material| Polymethyl methacrylate
Optical cover material| Glass
Fixation material| Aluminum
Housing Color| Gray
Mounting device| Side-entry for diameter 48 to 60 mm
Optical cover shape| Flat
---|---
Optical cover finish| Clear
Overall length| 620mm
Overall width| 234mm
Overall height| 95mm
Effective projected area| 0.0 251m2
Dimensions (Height x Width x Depth)| 95 x 234 x 620 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration- protected, jet-proof]
Mech. impact protection code| IKOB [5 J vandal-protected]
Surge Protection (Common/Differential)| Luminaire surge protection level
until 6 kV differential mode and 8 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class I
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.381, 0.379) SDCM <5
Power consumption tolerance| +/-10%
lnit. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)
Driver failure rate at 5000 h| 0.5 %
Control gear failure rate at median useful life 100000 h| 10 %
*Lumen maintenance at median useful life 100000 h| L97
Application Conditions**
Performance ambient temperature Tq| 25 °C
Maximum dim level| 0% (digital)
Product Data
Order product name| BGP292 LED75- 4S/ 74 0 I DX10 48/ 60 S
Full product name| BGP292 LED75- 4S/ 74 0 I DX10 48/ 60 S
Full product code| 871951410036700
Order code| 910925866771
Material Nr. {12NC)| 910925866771
Numerator – Quantity Per Pack| 1
EAN/UPC – Product/Case| 8719514100367
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8719514100367
Dimensional drawing
CUSTOMERS SUPPORT
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for
any action in reliance thereon. The
information presented in this document is not intended as any commercial offer
and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the
Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, February 14 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>