Sonoff DIY Micro USB Smart Adapter User Manual

Sonoff DIY Micro USB Smart Adapter User Manual

Operation instruction

1. Download eWeLink APP

http://app.coolkit.cc/dl.html
Android™ & iOS

2. . Power on
   
   Powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi indicator flashes quickly.
   3. Add the device
   1. Download eWeLink APP
   Operation instruction
   It will exit the pairing mode (Touch) if the device is not paired within 3mins. If you want to enter this mode again, long press the configuration button for 5s until the Wi-Fi indicator flashes quickly and release.

3. Add the device

Method 1: Scan the code to add (recommended)

Tap “+” and select “Scan QR code”, then scan the QR code on the card in the package to add the device.

Method 2: manual to add

1. Set the device to the pairing mode, and find the Wi-Fi SSID with ITEAD-*** on your mobile phone, and save last 10 digital codes (The digital code is the uniqueID of the device)
2. Go back to “eWeLink” App, tap“+”, select “Scan QR code” , then tap the word “Scanning failed. Please enter device ID manually” on the bottom and save the device ID, tap “Next” and wait until the adding is successful.

Specifications

Product Introduction

Wi-Fi LED indicator status instruction

is not connected
Blue light flashes quickly three times| Upgrading

Features

Micro is a portable mini USB smart adaptor that makes your USB devices smart. You can remotely turn on/off the connected devices of your home anywhere, schedule it on/off and share it with your family to control together.

• Remote Control

• Single Countdown Timing

• Voice Control

• Share Control

• Sync Status

• Camera Linking

• Power-on State

• Smart Scene

Switch Network

If you need to change the network, long press the pairing button for 5s until the Wi-Fi indicator flashes quickly and release., then the device enters pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting.

Common Problems

Q: Why my device stays “Offline”?
A: The newly added device needs 1 – 2mins to connect Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status:

1. The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi:
   ① Maybe you have entered a wrong Wi-Fi password.
   ② Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
   ③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
   ④ Maybe the MAC address filtering is open. Please turn it off.
   If none of the above methods solved the problem, you can open the mobiledatanetwork on your phone to create a Wi-Fi hotspot, then add the device again.

2. Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double flash occurs frequently, which means youaccess an unsteady network, not a product problem. If thenetwork is normal, try to turn off the power to restart the switch.

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type Micro is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:

https://www.sonoff.tech/usermanuals

TX Frequency:
WiFi: 2412-2472MHz/2422-2462MHz
RX Frequency:
WiFi: 2412-2472MHz/2422-2462MHz
Output Power:
11.49dBm(802.11b), 10.61dBm(802.11g),
11.09dBm(802.11n20), 11.44dBm(802.11n40)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>