ROVSUN 132 Ice Cream Machine Instruction Manual

ROVSUN 132 Ice Cream Machine

SAFETY INFORMATION

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and the word “WARNING” or “CAUTION”.
These words are defined as:

• WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• WARNING To reduce the risk of fire, explosion, electric shock, exposure to UV radiation, or injury when using your ice cream machine, follow these basic safety precautions:
• WARNING The appliance must be grounded and use al 10-120V~/60Hz power supply.
• This product must be properly installed and located in accordance with the Installation instructions before using.
• When using electrical appliances, please follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before using any appliance.
• High humidity environment will increase the risk of short circuit or electric shock. If in doubt, please cut off the power supply of the ice cream machine.
• Do not exceed power outlet ratings. It is recommended to connect the ice cream machine to its own circuit. Only use standard electrical supply that is properly grounded in accordance with the National Electric Code and local codes and ordinances.
• The machine is intended for the following applications such as:
  • kitchen areas in shops,offices and other working environments;
  • farm houses
  • by clients in hotels, motels and other residential type environments;
  • Catering industry and similar non-retail industry.
• Children and disabled people must be supervised to use this machine
• Avoid direct sunlight, and ensure that the machine is used at home with no obstacles and good ventilation. There must be at least 50cm between the four sides of the machine with the wall.
• Do not tip the machine over.
• We do not recommend the use of an extension cord, as it may overheat and become a risk of fire.
• Do not immerse any part of the product in water.
• To avoid risk of injury, place the power cord where children cannot pull it or cause tripping hazards.
• Do not operate if any component, including the cord or plug, is damaged.
• Unplug the product before cleaning or repairing, and when not in use. (Note: If the machine needs maintenance, it is strongly recommended that the operation be carried out by professionals.)
• Do not plug or unplug product with wet hands.
• Do not place the power cord on carpet or other heat sources.
• Do not attempt to disassemble, repair, modify, or replace any part of your product.
• Use this product only for its intended purpose as described in this user manual.
• If the power cord is damaged, it must be replaced by the manufacturer or similar professionals in order to avoid danger.
• Do not use any accessories not recommended by the manufacturer.
• Do not pull the cable to unplug the plug,pull the plug is a must.
• The beater must be replaced by original one.
• Do not spray water to clean the machine in order to avoid danger.
• The hopper must be covered when the machine is working to prevent people from touching the liquid inside, and it is not allowed to stir with hands in order to avoid danger.
• If a gas leak, do not touch the machine and the leakage circuit breaker, open the window for good ventilation, otherwise it may cause an explosion.
• Do not use flammable stuff near the machine to avoid fire.Do not store any explosive stuff in the machine, like combustion adjuvant.
• Do not touch any component or switch of the machine with wet hands to avoid electric shock.
• The machine must be operated by professionals to avoid danger.
• Do not allow children to climb, stand or hang on the the machine. They could seriously injure themselves.
• Do not place any heavy weight on the machine.
• Do not insert hands or any other stuff in the air outlet to avoid danger or affect ventilate.

Unpack the machine

• WARNING Do not use foam and other packaging materials as toys for children and persons
• CAUTION Remove all the package before operate the machine. with intellectual disabilities in order to avoid danger.
  • a) Unwrap and check the machine is normal or not;
  • b) Check whether there are all the below accessories in the package or not.

Please check the accessories list on the back cover.

Installation and setup

Caution: Installation must be installed by professionals.

WARNING

• The machine should be used indoors, and can’t be put or used in rain. Ensure a minimum of 15cm clearance around the side and back walls of the ice cream machine for proper air circulation.
• The machine should be placed on a level and firm place, otherwise it may cause tilt, noise, and excessive vibration.
• Please do not overturn or tilt the machine 45°, it may cause abnormal noise and danger to the machine.

WARNING

1. The machine must be grounded, or else, accidental creepage can lead to electric shock or serious damage.
2. Do not exceed power outlet ratings. It is recommended that the ice cream machine is connected to its own circuit to avoid fire. The Residual Current Circuit Breaker must be;:o20A
3. Do not operate if any component, including the cord or plug, is damaged to avoid fire or electric shock.

Components

Installation and use

1. Place the machine on a flat place.
2. Take away the cover and take all accessories out.
3. Installation.
4. Insert the handle valve into the outlet valve.
5. Install the spring and put the wrench into the hole of the handle valve.
6. Put the wrench with spring in the outlet valve.align the hole of the wrench to the hole of handle valve.which make the wrench was fixed into the outlet valve.
7. Put the styling hat on the outlet.
8. Screw the fastening nut to fix the outlet valve and the machine together.
9. Install the drip tray.
10. Cover the tray.
11. Insert the puff pipe into the hole of the hopper.
12. Pour the mixed ice cream into hopper.
13. Cover it and plug into a socket.
14. Adjust the electric current.
15. A Make ice cream.
    • B Make ice cream.

Understanding the control screen

Error code

70’C
E2| The cylinder probe is damaged
E3| Working current is above 5A
E4| Rotate speed of motor is too slow
E5| Compressor – High pressure protection
E6| Handle didn’t return to right position or the handle sensor is damaged
E7| Without load current is more than 1.8A or less than 0.4A
ES| The temperature in cylinder is too low. Lack of ice cream or the puff tube was blocked

How to use the puff tube?

Care and cleaning

• Do not spray water to clean the machine in order to avoid danger.
• Unplug the product before cleaning or repairing.
• Do not clean the machine with alcohol which will make plastic component crack

Clean the outlet

Clean the external

• Clean external everyday, do not clean the machine with alcohol which will make plastic component crack.
• Clean the external with soft cloth, don’t spray water to the machine to clean.

Clean internal

Replace the easily damaged parts

Seals
Even if there are scars on the seal that are invisible to the naked eye, the ice cream may leak. Therefore, it is recommended to replace the seals every 3 months.

Beater
If the beater is damaged, the material in the cylinder will be inconsistent in hardness and part of the ice cream will not be able to be discharged. Therefore, it is recommended to replace it every 6 months. If there is serious wear and tear within 6 months, please replace it in time.

1. Long-term storage of the machine
   • a) Unplug the power plug, dry the surface of the machine and the water on the power cord. Pack up the power cord but can’t not excessively twisted.
   • b) Put the machine in a safe place and cover the machine to keep it away from dust.
   • c) The place where the machine is placed must not be accessible to children and persons with intellectual disabilities.

Circuit diagram

COMMON MALFUNCTION ANALYSIS

Warm Tips:

1. Check whether all below accessories are there.
2. Install the machine according to the manual.
3. Allow the machine to stand 24-hours after you get it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>