SONOFF TX Ultimate Smart Touch Wall Switch User Manual

SONOFF TX Ultimate Smart Touch Wall Switch

Product introduction

The device weight is less than 1kg, and the recommended installation height is less than 2m.

LED Indicator status and instruction

router
Flashes blue quickly twice| Device is connected to the router but not to the cloud

Operation instruction

trigger the smart scenes
Long press| Long press the switch panel for 5s| Make the device enter the pairing mode
Swipe| Swipe on the switch panel and ensure the swipe distance exceeds 50% of it

• T5-86 supports left/right swipe

| Trigger the smart scene
Multi-point click| Multiple fingers click the switch panel| Turn on/off the ambient light manually

Features

SONOFF TX Ultimate is a smart touch wall switch with LED lights which will produce sound, light and vibration effects when it is turned on/off. After adding in the eWeLink App, you can remote control on/off, switch the ambient lighting modes, set timer and smart scene on the phone.

• Remote Control

• Voice Control

• Smart Scene

• Ambient Lighting Mode

• Touch Vibration

• Light Effects

Installation

Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!

Wiring instruction

Before installing the device, please install an air switch as the protective device (Air switch 16A/250V).

Make sure all wires are connected correctly.

Pairing Method

1. eWeLink App Pairing
   1-1 Download the eWeLink App
   Please download the “eWeLink” App from Google Play Store or Apple App Store.
   
   1-2 Power on
   1-3 Add device
   After powering on, the device will enter the Bluetooth pairing mode by default during the first use and the LED frame light will light in the “Cycle mode”.
   
   The device will exit the Bluetooth pairing mode when it doesn’t be paired successfully within 10mins. If you want to access the pairing mode again, touch the wall switch panel for 5s until the LED frame light lights in the “Cycle mode”.
   1-3 Add device
   After powering on, the device will enter the Bluetooth pairing mode by default during the first use and the LED frame light will light in the “Cycle mode”.
   Tap “+” and select “Bluetooth Pairing”, then operate following the prompt on the App.
   

Amazon Frustration-Free Setup (FFS)

Applicable situation: The account you use to purchase this device on Amazon.com is the same as the Alexa account you sign in the smart speaker (with Certified for Humans badge).

1. 2-1After power on the device, it will enter the FFS pairing mode by default (LED indicator flashes in “Cycle mode”).
   

2. 2When you hear “New switch found” after powering on for about 1-2 mins, refresh the device list in the Alexa App and you will see the device is added successfully.
   

https://sonoff.tech/product-review/tutorial/works-with-alexa-instruction- guide/

1. The device will exit FFS pairing mode if it had not been paired within 30mins. If you want to enter the pairing mode again, please long press the switch panel for 5s until the LED indicator flashes in “cycle mode”.
2. If the device cannot be paired through FFS pairing mode for a long time, please pair the device by method (1) eWeLink App pairing.
3. The method of FFS pairing can only be used to add devices to Alexa App.
4. If you want to synchronize this device between eWeLink App and Alexa App, please connect the accounts of eWeLink and Alexa through Account Linking, scan the QR code or enter the URL to check the guideline of Account Linking.

Add eWeLink-Remote Sub-devices

Enter the Device Settings page on the eWeLink App, select “eWeLink-Remote sub- devices” and tap “Add”, then trigger the sub-device to add it successfully.

Specifications

1. C:100-240V ~ 50/60Hz Max 5A
2. C:100-240V ~ 50/60Hz  Max 10A
3. C:100-240V ~ 50/60Hz  Max 15A

Output|

1. C:100-240V ~ 50/60Hz Max 5A
2. C:100-240V ~ 50/60Hz   Max 5A/Gang 10A/Total
3. C:100-240V ~ 50/60Hz   Max 5A/Gang 15A/Total

Wi-Fi| IEEE 802.11b/g/n 2.4GHz
Working temperature| -10℃ ~ 40℃
Working humidity| 5% ~ 95% RH, non-condensing
Color| White
Casing material| PC
Dimension| 86x86x39mm

References

• Amazon.com. Spend less. Smile more.
• Works with Alexa Instruction Guide - SONOFF Official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>