SONOFF MINIR2 Wifi Smart Switch with DIY Mode User Manual
- October 30, 2023
- SonOFF
Table of Contents
- SONOFF MINIR2 Wifi Smart Switch with DIY Mode User Manual
- Operating Instruction
- Compatible Pairing Mode
- Specifications
- Product Introduction
- Wi-Fi LED indicator status instruction
- Features
- Switch Network
- Factory Reset
- Common Problems
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SONOFF MINIR2 Wifi Smart Switch with DIY Mode User Manual
Operating Instruction
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing! Please do not touch the switch during use.
Wiring instruction
Make sure the neutral wire and live wire connection is correct.
S1/S2 can connect with the rocker light switch or doesn’t connect. To ensure
safety, do not connect the neutral wire and live wire to it.
Download APP
|
Power on
After powering on, the device will enter the quick pairing mode (Touch) during
the first use. The Wi-Fi LED indicator changes in a cycle of two short and one
long flash and release.
The device will exit the quick pairing mode (Touch) if not paired within
3mins. If you want to enter this mode, please long press the manual button for
about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one
long flash and release.
Add the device
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair.
➊ Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a
cycle of two short flashes and one long flash and release. Long press Pairing
button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the
device enters Compatible Pairing Mode.
➋ Tap “+” and select “ Compatible Pairing Mode ” on APP. Select Wi-Fi SSID
with ITEAD-** and enter the password 12345678, and then go back to
eWeLink APP and tap “Next”. Be patient until pairing completes.
Specifications
| Model | MINIR2 |
|---|---|
| Input | 100-240V AC 50/60Hz 10A Max |
| Output | 100-240V AC 50/60Hz 10A Max |
| Operating systems | Android & iOS |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Material | PC V0 |
| Dimension | 42.6×42.6x20mm |
Product Introduction
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Wi-Fi LED indicator status instruction
| Wi-Fi LED indicator status | Status instruction |
|---|---|
| Flashes (one long and two short) | Quick Pairing Mode |
| Keeps on | Device is connected successfully |
| Flashes quickly | Compatible Pairing Mode |
| Flashes quickly once | Unable to discover the router |
| Flashes quickly twice | Connect to the router but fail to connect to Wi-Fi |
| Flashes quickly three times | Upgrading |
Features
Turn on/off the device from anywhere, schedule power on/off and share APP with your family to control.
-
Remote Control
-
Single/Countdown Timing
-
Voice Control
-
Share Control
-
Smart Scene
-
Sync Status
-
No Hub Required
-
Camera Linking
-
Power-on State
-
LAN Control
Switch Network
If you need to change the network, long press the pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then the device enters quick pairing mode and you can pair again.
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory setting.
Common Problems
Q: Why my device stays “Offline”?
A: The newly added device needs 1 – 2mins to connect Wi-Fi and network.
If it stays offline for a long time, please judge these problems by the blue
Wi-Fi indicator status:
-
The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi:
① Maybe you have entered a wrong Wi-Fi password.
② Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
④ Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again. -
Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If thenetwork is normal, try to turn off the power to restart the switch.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type MINIR2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals
TX Frequency:
WiFi: 2412-2472MHz
RX Frequency:
WiFi: 2412-2472MHz
Output Power:
9.86dBm(802.11b), 9.93dBm(802.11g), 9.92dBm(802.11n20)
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>