american lighting 73217 Isla Vista Coal Outdoor Ceiling Light Instruction Manual

american lighting 73217 Isla Vista Coal Outdoor Ceiling Light

Product Information

Specifications:

• Model: 73217
• Fixture Type: Ceiling Light Fixture
• Max Wattage: 60 watts per bulb
• Fixture Material: Glass

Product Usage Instructions

Preparing for Installation:

1. Shut off the power at the fuse box or circuit breaker box and remove the old fixture, including the mounting hardware.
2. Unpack the new fixture and lay out all parts in a clear area. Ensure no small parts are misplaced.
3. Attach the mounting plate (A) to the outlet box (C) using the provided outlet box screws (B). Make sure the side marked GND is facing out.

Connecting the Wires:

1. Connect the electrical wires as shown in Fig.2. Ensure all wire connectors are secured.
2. If your outlet box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect it directly to the mounting plate (A) using the green screw (E).
3. Tuck the wire connectors neatly into the outlet box (C).

Completing the Installation:

1. Align the canopy (H) onto screws (D) and secure with knurled knobs (H).
2. Install two medium base bulbs up to 60 watts each or CFL/LED equivalent following fixture specifications. Do not exceed the maximum wattage rating.

Your installation is now complete. Restore power to the outlet box and test the fixture.

FAQ:

Q: What should I do if my outlet box does not have a ground wire?
A: In such a case, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw (E) provided.

Q: Can I use bulbs with wattage higher than 60 watts?
A: No, it is important not to exceed the maximum wattage rating\ of 60 watts per bulb to prevent damage to the fixture.

INSTALLATION INSTRUCTIONS

Model # 73217
READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OF F AT FUS E OR CIRCUIT BREAKER.

PREPARING FOR INSTALLATION (Fig. 1)

1. Shut off the power at the fuse box or circuit breaker box and remove the old fixture, including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

3. Attach mounting plate (A) using outlet box screws (B) to outlet box (C) (Not included).
   Note: The side of mounting plate (A) marked “GND” must facing out.
   CONNECTING THE WIRES (Fig. 2)

4. Connect the electrical wires as shown in Fig.2. Make sure that all wire connectors are secured. If your outlet box (C) has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw (E) provided.

5. Tuck the wire connectors neatly into outlet box (C).
   COMPLETING THE INSTALLATION (Fig. 1)

6. Align canopy (H) onto screws (D) and secure with knurled knobs (H).

7. Install (2) two medium base bulbs up to 60 watts or CFL or LED equivalent (Not included) in accordance with the fixture specification.

DO NOT EXCEED THE MAXIMUM WATTAGE
RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

Your installation is now complete. Return power to the outlet box and test the fixture.
Min 75℃ supply conductors

“CAUTION-RISK OF FIRE CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>