MuxLab 12G-SDI Repeater User Manual

: June 1, 2024
: MuxLab

Table of Contents

MuxLab 12G-SDI Repeater
Product Usage Instructions
Safety Precautions
Introduction
Features
Package Contents
Specifications
Hardware Interface
Software Interface
Application Diagram
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MuxLab 12G-SDI Repeater

Specifications:

Environment Video Resolution: SD-SDI up to 12G-SDI
Distance at 12G-SDI: Input 100M / Output 100M (Cable: Canare L-5.5CUHD)
Distance at 3G-SDI: Input 70M / Output 50M (Cable: Belden 1694A)
USB Link: Mini-USB
Power Supply: 12VDC, Locking connector
Working Temperature: 0 to 40°C, up to 95% humidity non-condensing
Storage Temperature: -20 to 60°C

Product Usage Instructions

Installation:

Ensure that all package contents are included.
Connect the 12G-SDI Repeater to power using the provided universal power supply.
Connect the video input and output using appropriate SDI cables.
If configuring via USB, connect the Mini-USB cable to the Mini-USB connector on the left side panel.

Basic Operation:

The device supports auto source video format detection, so it will automatically adjust to the incoming video signal.

LED indicators on the rear panel provide status information, including Phase Locked Loop (PLL) locking indication.

Optional Configuration:

To configure the device using the MuxLab SDI Manager software:

Download and install the software from the MuxLab website.
Connect a PC to the device via the Mini-USB connector.
Use the software for basic configuration and firmware upgrades.

FAQ:

Q: Can the 12G-SDI Repeater support audio signals?
A: Yes, the device supports audio formats of up to 16 channels with 24-bit depth and up to 48 kHz.
Q: What is the warranty period for the product?
A: The product comes with a 2-year warranty.

Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
To prevent fire or shock hazards, do not expose the unit to rain, or moisture and do not install this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by overheat.
Unplug the power when left unused for a long period.
Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.

Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.

Introduction

The 12G-SDI Repeater (Model 500742) is a 12G-SDI to 12G-SDI Repeater with Amplification and Re-clocking Technology and auto source video format detection. It performs high-quality, low-delay video auto format detection, video signal re-clocking, and video signal amplification for transmission over a long distance. It features one 12G-SDI video input, one 12G-SDI loop video output, a locking Power Supply connector, and a USB port for software control and firmware upgrade. An output LED shows the status of the Phase Locked Loop (PLL) Video Signal Locking.

Features

Wide support of SDI video signal resolutions
High Quality 12G-SDI Re-clocking & Amplification Technology
Multi-Standard Support (12G, 6G, 3G, HD, and SD-SDI)
Auto Source Video Format Detection
Supports 16-channel, 24-bit Audio formats
Easy plug and play installation
Rugged design and integrated brackets for easy mounting
Optional configuration via USB port and the MuxLab SDI Manager software available for easy control and firmware upgrade

Package Contents

One (1) 12G-SDI Repeater
One (1) Universal Power Supply including international plug connections for use around the world
One (1) USB to Mini-USB cable
One (1) User manual (available via download)

Notes: Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.

Specifications

Environment	SD-SDI up to 12G-SDI
Video Resolution	12G-SDI
Distance at 12G-SDI	Input 100M / Output 100M (Cable: Canare L-5.5CUHD)

Input 70M / Output 50M (Cable: Belden 1694A)

Distance at 3G-SDI| Input 100M / Output 100M (Cable: Belden 1694A)
USB Link| Mini-USB
Power Supply| 12VDC, Locking connector
Working Temperature| 0℃ to 40℃, up to 95% humidity non-condensing
Storage Temperature| -20℃ to 60℃. Bring to working temperature range before power-up.
Supported Video Format| s

SDI Input Video Resolutions

| 12G-SDI 4096x2160p, 60/50fps

3840x2160p, 60/50fps

6G-SDI 4096x2160p, 30/25/24fps

3840x2160p, 30/25/24fps

3G-SDI 1920x1080p, 60/50fps

HD-SDI 1920x1080p, 30/25/24fps

1920x1080i, 60/50fps

1280x720p, 60/50fps

SD-SDI 720x480i, 60fps

720x576i, 50fps

Hardware Interface

Front Panel $MuxLab-12G-SDI-Repeater-FIG- $3$$

Locking 12VDC Power interface.
Video 12G-SDI Input BNC Connector.

Left Side Panel $MuxLab-12G-SDI-Repeater-FIG- $4$$

Mini-USB connector to connect a PC running the MuxLab SDI Manager Software.

Rear Panel $MuxLab-12G-SDI-Repeater-FIG- $5$$

Video 12G-SDI Output BNC Connector.
LED for Phase Locked Loop (PLL) locking indication.

Software Interface

The 12G-SDI Repeater can be used right out of the box, without the use of any software. However, the MuxLab SDI Manager software is available for basic configuration and firmware upgrades. $MuxLab-12G-SDI-Repeater-FIG- $6$$

The MuxLab SDI Manager software can be used to manage the 12G-SDI Repeater.
The software features also a firmware upgrade option for future firmware releases.

The software runs on the Windows operating system and is available for download on the MuxLab website.

Software Download
When running the MuxLab SDI Manager software, you will see the splash screen below. Make sure to connect the USB cable between the PC and the device.

Software Settings
Once connected, you will see the Main screen. On the left side, the software will display the image of the connected 12G-SDI Repeater, the software version as well as the firmware version. It will also display the status of each video 12G-SDI port.

Video Settings
On the right side, under the Video tab, you can confirm the cable length used as Short or Long. $MuxLab-12G-SDI-Repeater-FIG- $7$$

Firmware Upgrade

The F/W Update tab will display the menu for upgrading the device’s firmware. $MuxLab-12G-SDI-Repeater-FIG- $8$$
To upgrade the firmware, three files could be provided depending on what needs to be updated.

The firmware upgrade procedure is as follows:

Go to the “F/W Update” tab
Click on the folder button to select the file(s)
A File Open Menu will appear $MuxLab-12G-SDI-Repeater-FIG- $9$$
Select a BIN file or a FIN file to update.
Click on the “Start” button; a progress bar will be displayed. Make sure the device is powered at all times during the firmware update process.
Once the progress bar is complete, repeat the two steps above for all three files for upgrade.
After all three files have been uploaded successfully, power cycle the device.

General Settings
The Setting Tab can be used to perform a hardware reset. The device will reboot for a few seconds and will reconnect to the software. $MuxLab-12G-SDI- Repeater-FIG- $10$$