ADJ MIRAGE Q IPCB User Guide

: June 4, 2024
: ADJ

Table of Contents

DOCUMENT VERSION
INTRODUCTION
LIMITED WARRANTY (USA ONLY)
SAFETY GUIDELINES
INSTALLATION
OPERATION
CLEANING AND MAINTENANCE
DIMENSIONAL DRAWINGS
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIRAGE Q IPCB
User Guide

©2022 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice.
ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
All non-ADJ Products, LLC brands, and product names are trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this the document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of this document may be available online.
Please check www.adj.com for the latest revision/update of this manual before beginning installation and/or programming.

https://qrs.ly/2vbr0rs

Date

| Document Ver| Software Ver| DMX Ch|

Notes

---|---|---|---|---
06/30/22| 1.0| N/A| N/A| Initial Release
08/10/22| 1.1| N/A| N/A| Updated Specifications

INTRODUCTION

Unpacking: Thank you for purchasing the Mirage Q IPCB from ADJ Products, LLC. Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to have been damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit have arrived intact. In the event that damage has been found or parts are missing, please contact our toll-free customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support.
Introduction: The ADJ Mirage Q IPCB is a charging base designed for use with the ADJ Mirage Q IP lighting fixture. To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit.
These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit for future reference.

Customer Support: Contact ADJ Service for any product-related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.
Parts: To purchase parts online visit: http://parts.adj.com (US) | http://www.adjparts.eu (EU)
ADJ SERVICE USA – Monday – Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: 323-582-2941 | support@adj.com
ADJ SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | support@adj.eu
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax 323-532-2941 | www.adj.com | info@adj.com
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
+31 (0)45 546 85 00 | Fax +31 45 546 85 99
www.americandj.eu | info@americandj.eu
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000 +52 728-282-7070
WARNING! The unit is intended for indoor use only! Do not expose to rain and/or moisture!
CAUTION! There are no user-serviceable parts inside this unit. Do not attempt any repairs yourself, as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, please contact ADJ Products, LLC.
Do not discard the shipping carton in the trash. Please recycle whenever possible.

LIMITED WARRANTY (USA ONLY)

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see speciﬁc warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product back—please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall incur no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modiﬁed in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because it was not properly maintained as set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic checkup. During the period speciﬁed above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or ﬁtness, are limited in duration to the warranty period set forth above. And all warranties, whether expressed or implied, including warranties of merchantability or ﬁtness, are limited in duration to the warranty period set forth above. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Product, LLC be liable for any loss and/or damage, direct and/or consequential arising out of the use of, and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to products purchased within the United States. StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)

All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain an R.A. number by contacting our customer support team.
All packages returned to the service department not displaying an R.A. number on the outside of the package will be returned to the shipper.

SAFETY GUIDELINES
FOR YOUR OWN PERSONAL SAFETY, PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE YOU ATTEMPT TO INSTALL OR OPERATE THIS UNIT!

Be sure to save the packing carton in the unlikely event the device may have to be returned for service.
Do not spill water or other liquids into or onto the device.
Be sure that the local power outlet matches the required voltage for the device.
Do not open up the device for any reason. There are no user-serviceable parts inside.
Disconnect the device’s main power when left unused for long periods of time.
Never connect this device to a dimmer pack.
Do not attempt to operate this device if it has been damaged in any way.
Never operate this device with the cover removed.
To reduce the risk of electrical shock or fire, do not expose this device to rain or moisture.
Do not attempt to operate this device if the power cord has been frayed or broken.

SAFETY GUIDELINES

Disconnect from main power before making any type of connection.
Never block the ventilation holes. Always be sure to mount this device in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
This unit is intended for indoor use only. Use of this product outdoors voids all warranties.
Always mount this unit in a safe and stable matter.
Please route your power cord out of the way of foot traffic. Power cords should be routed so they are not likely to be walked on, or pinched by items placed upon or against them.
The device should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into, the device.
C. The device has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibit a marked change in performance.

Keep flammable materials away from this fixture!
THE DEVICE IS DESIGNED FOR INDOOR USE ONLY! DO NOT EXPOSE TO RAIN OR MOISTURE!

INSTALLATION

FLAMMABLE MATERIAL WARNING
Keep ﬁxture minimum of 5.0 feet (1.5m) away from ﬂammable materials and/or pyrotechnics.

ELECTRICAL CONNECTIONS
A qualiﬁed electrician should be used for all electrical connections and/or installations.

DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!

The device MUST be installed following all local, national, and country commercial electrical and construction codes and regulations.
Place the devise only on flat, stable surfaces.
Device(s) should be installed outside walking paths, seating areas, or areas where unauthorized personnel might reach the ﬁxture by hand.

THIS DEVICE IS RATED ONLY FOR INDOOR USAGE! DO NOT EXPOSE THIS DEVICE TO RAIN AND/OR MOISTURE, AS DOING SO WILL DAMAGE THE DEVICE AND VOID THE MANUFACTURER’S WARRANTY!

OPERATION

To use this device, simply place it on a flat, level surface in a dry or indoor location. Connect the included power supply to the power inlet port on the side of the device, and connect the power supply to a power outlet (below left). Then simply dock your ADJ Mirage Q IP fixture onto the Mirage Q IPCB device, making sure that the charging ports fit together tightly (below right). The Mirage Q IP lighting fixture will now begin to charge.
An LED indicator located on the Mirage Q IP lighting fixture will illuminate red to indicate that the unit is now being charged. This LED changes to green when charging is complete.
It is advised to disconnect the fixture from the charging base when charging is complete, in order to avoid unnecessary wear on the battery. ADJ MIRAGE Q
IPCB - Figure 1

CLEANING AND MAINTENANCE

DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Clean periodically with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life. There are no user-serviceable parts inside this device. Please refer all other service issues to an authorized ADJ service technician. Should you need any spare parts, please order genuine parts from your local ADJ dealer.
NEVER remove the ground prong from the power cable.

Please refer to the following points during routine inspections:

A detailed electrical check by an approved electrical engineer every three months, to make sure the circuit contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during normal operation, resulting in damage or injury as larger parts could fall.
Check for any deformations on the housing, as these could allow for dust or liquids to enter into the ﬁxture.
Electric power supply cables must not show any damage, material fatigue, or sediments.