american lighting association 2432-84, 878 Winsley 14 Inch 2 Light Brushed Vanity Light Instruction Manual
- October 30, 2023
- american lighting association
Table of Contents
american lighting association 2432-84, 878 Winsley 14 Inch 2 Light
Brushed Vanity Light
Product Information
The product being referred to in the user manual is Item#2432-84/878. It is a fixture that can accommodate two medium base (E26) bulbs up to 60 watts each or CFL or LED equivalent. The fixture comes with a circular strap, ground screw, mounting screw, metal ring, glass shade, socket cup, and finials.
INSTALLATION INSTRUCTIONS
MOUNTING THE FIXTURE (Fig.1)
- Shut off power at the fuse box or circuit breaker and remove the old fixture including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts on a clean area. Take care not to lose any small parts necessary for installation.
- Thread mounting screws (B) into pre-drilled holes in circular strap (G) spaced same distance apart as holes in back plate and tighten with nuts (E). The length of mounting screws (B) may be adjusted if necessary.
- Attach circular strap (G) to junction box (not included) using junction box screws (D). The side of circular strap marked “GND” must face out.
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as shown in Fig.2, making sure that all wire connectors (C) are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the circular strap (G) using the green screw provided.
- Tuck wire connectors neatly into the junction box.
FINISHING THE INSTALLATION (Fig.1)
- Place back plate onto mounting screws (B) and secure with finials (A).
- Unscrew metal ring (F) and place glass shade (I) onto socket cup (H). Secure glass shade (I) with metal ring (F).
- Install (2) two medium base (E26) bulb up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification.
Warning: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the junction box and test
the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes
only. It may or may not be identical to the fixture purchased.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>