VEVOR P49-1-X Aluminum Plastic Composite Pipe Instruction Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR P49-1-X Aluminum Plastic Composite Pipe
Specifications
- Model: P49-1-25, P49-1-100, P49-1-200, P49-1-300, P49-3-50
- Exterior Diameter: 16mm (P49-1), 20mm (P49-3)
- Overall Thickness: 2mm
- Total Length: 25m, 100m, 200m, 300m, 50m
- Color: White
- Material: PEX – Aluminum Layer – PEX Composite Pipe
Product Usage Instructions
Product Features:
- Bending: Easy bending non-respringback, laying coil in construction.
- Pipe Positioning and Fixing: Very easy, work efficiency can be greatly improved.
- Oxygen Protection System: Aluminum tube in the middle layer isolates oxygen permeation, preventing oxidation corrosion.
- Smooth Inner Wall: Streamlined design reduces fluid resistance and scaling to avoid blockage.
- Heat Resistance: Vicat softening point is 131.5°C, maximum working temperature up to 95°C.
- Cold Temperature: Can be used at -40°C without damage, easy to bend and connect.
Instructions for Use:
Easy Installation: The aluminum-plastic pipe can be cut with a special
pipe cutter or other cutting tools without the need for a wire. It can be bent
without rebounding. The pipe bending operation is simple and the pipeline
connection is convenient.
FAQ
-
How do I cut the PEX-AL-PEX composite pipe?
You can cut the pipe using a special pipe cutter or other cutting tools. Make sure to follow proper cutting techniques to ensure clean cuts. -
Can the PEX-AL-PEX composite pipe be used for hot water systems?
Yes, the pipe has good heat resistance and can be used for building water supply and drainage systems that require hot water usage. -
How do I bend the PEX-AL-PEX composite pipe without causing damage?
The pipe can be easily bent in cold temperatures without damage. Ensure to follow bending instructions provided in the manual to avoid any issues.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: Technical Support and E-Warranty Certificate
www.vevor.com/support
PRODUCT PAREMETERS
Model| P49-1-25| P49-1-100| P49-1-200| P49-1-300| P49-3-5
0
---|---|---|---|---|---
Exterior
Diameter
| 16mm| 16mm| 16mm| 16mm| 20mm
Overall
Thickness
| 2mm| 2mm| 2mm| 2mm| 2mm
Total
Length
| 25m| 100m| 200m| 300m| 50m
Color| White| White| White| White| White
Material| PEX – Aluminum Layer – PEX
PACKING LIST
Fifth floor structural section
INSTRUCTIONS
- Long service life: under the working temperature of 70 ℃ and the working pressure of 1.0MPa, the long-term continuous service life is more than 50 years; the normal temperature 20c service life is more than 100 years;
- The crosslinking degree is stable and even: the crosslinking degree is stable, the inner and outer diameters of the pipes are unified, and the wall thickness is even in the longitudinal and transverse directions;
- High strength pressure resistance: it can withstand 85 ° water temperature for a long time, because it contains seamless laser butt welding and aluminum layer of lap welding process, it can withstand 10 kg pressure range;
- Good thermal conductivity: the coefficient of thermal conductivity is 0.45w/mk, 1.5 ~ 2 times of the coefficient of cross-linked polyethylene pipe, which is more conducive to the heat transfer between the pipe and the floor, and the heating system has higher thermal efficiency;
- Installation is faster as bending without rebound : with the characteristics of easy bending non-respringback, laying coil in construction, pipe positioning and fixing are very easy, work efficiency can be greatly improved;
- The coefficient of thermal expansion is small: the coefficient of thermal expansion is 2.5×10-5 m/mk, to avoid large expansion or contraction caused by ground rupture or pipe system damage;
- The safety of oxygen protection system: the aluminum tube in the middle layer can completely isolate the oxygen permeation, prevent the oxidation corrosion of the corrosion-prone components, and ensure the normal operation and service life of the system for a long time;
- Smooth inner wall of pipe without scaling: streamlined design, low fluid resistance, low flow noise, reduce scaling to avoid blockage;
- Good heat resistance: Vicat softening point is 131.5℃, the maximum working temperature up to 95℃, fully meet the building water supply and drainage code in the use of hot water system requirements;
- Don’t damage on cold temperature: in winter-40℃ low temperature conditions can be normal construction, easy to bend without damage, hot melt and mechanical connection is convenient and simple;
INSTRUCTIONS FOR USE
Easy Installation
The aluminum-plastic pipe can be cut with a special pipe cutter or other
cutting tools, without the need for a wire, and can be bent without
rebounding. The pipe bending operation is simple and the pipeline connection
is convenient.
ABOUT COMPANY
- Address： Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
- Technical Support and E-Warranty Certificate www.vevor.com/support
- Made In China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>