AQUADISTRI R3300005 Repto Flex Rainmaker Instruction Manual
- June 2, 2024
- AQUADISTRI
Table of Contents
AQUADISTRI R3300005 Repto Flex Rainmaker
Repto Flex Rainmaker
Specifications:
- Main unit with bracket
- Power adapter
- Hose
- Filter head
- End cap
- Spray nozzle x2
- Suction cup x2
Product Information:
The Repto Flex Rainmaker is a device designed for terrarium use to provide
controlled misting for reptiles. It features adjustable spray cycles and
durations to simulate natural environmental conditions.
Usage Instructions
Installation:
Installing the Inlet Tube:
- Cut the tube to the desired length.
- Cover the end of the tube in your reservoir with the filter head.
- Insert the other end into the inlet hole of the main unit.
Installing the Spray Pipe:
- Connect end cap, spray nozzle, and pipe as shown in the manual.
- Attach the spray nozzle to the proper place in the terrarium and connect the other pipe end to the outlet hole of the main unit.
- When installing the spray head, ensure the suction cup is placed on smooth, flat glass.
Mounting the Main Unit:
- Attach the bracket to the back of the unit and hang it on the edge of the terrarium.
- Attach suction cups to the back of the unit and then to the glass of the terrarium.
- Install the main unit and spray pipes as shown in the manual.
- Place the inlet pipe in a clean water source.
Water Pump Settings:
- Cycle: Set the cycle duration by pressing the Cycle button for three seconds. Choose from 01 to 24 hours.
- Spray Duration: Set the spray duration by pressing the Duration button for three seconds. Choose from 02 to 120 seconds.
Frequently Asked Questions (FAQ):
Q: Can this device be used with chemicals or liquids other than water?
A: No, this device is designed for terrarium use with water only. Do not
use any chemicals or other liquids.
Q: How do I clean the filter head?
A: To clean the filter head, detach it from the inlet tube and rinse it
with clean water. Ensure it is completely dry before reattaching.
Inventory
- Main unit
- Bracket
- Power adapter
- Hose
- Filter head
- End cap
- Spray nozzle 2x
- Suction cup 2x
Repto Flex Rainmaker
General instructions
Read this manual carefully before using this device. Keep this manual for future reference.
Use
- Only suitable for indoor use.
- This Rainmaker should be only used for ceating mist. The water temperature should not exceed 35°C. It should never be used for other liquids or chemicals.
Meaning of symbols
The following warning symbols and/or signal words are used in this manual
WARNING!
This means a dangerous situation. Failure to follow the safety instructions
can result in moderate or minor personal injury and/or damage to the product
or environment.
DANGER!
This means an imminent danger due to electric current. Failure to follow the
safety instructions can result in serious or fatal injury and/or serious
damage to the product or environment.
NOTICE!
This means caution, useful information or advice.
Meaning of the symbols on the device itself
This device complies with all applicable EU standards.
This device may not be disposed of with normal household waste but must be collected separately for recycling.
This device may only be used inside the house for terrarium purposes.
Safety
Always follow the safety instructions below for safe use of the device. Failure to follow these instructions may endanger persons or the environment.
- Ensure the voltage shown on the label matches the mains supply voltage.
- This device must be connected to a socket which is earthed.
- Protect the socket and plug against moisture. Use a drip loop to ensure that water cannot reach the socket via the cord.
- Don’t use the product if the device, cord or plug is damaged.
- If the power cord or plug is damaged, the electrical part should be replaced.
- Be careful with the combination of water and electricity. Do not operate with wet hands. Dry hands before carrying out maintenance.
- Pay attention to the direction of the spray head to ensure not to spray electronic products, such as heating bulbs and other products.
- Always switch off all devices in the terrarium before maintenance. Disconnect the plug(s) from the socket.
- This device can be used by children aged from 8 years and above, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instructions concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and maintenance of the device shall not be done by children without supervision.
- Modifications to the device may affect the safety. The warranty will also expire.
- Aquadistri is not liable for any problems, damage or accidents due to incorrect use of this device.
Installation
Installing the inlet tube: Cut the tube to the desired length. Cover the the
end of the tube in your resevoir with the filter head (5).
Insert the other end in the inlet hole of the main unit.
Installing the spray pipe: Connect end cap, spray nozzle and pipe as shown
below (image 1) ,attach spray nozzle to the proper place of terrarium and
connect another pipe end to outlet hole of main unit.
Note: when installing the spray head, the suction cup should be placed on the smooth and flat glass.
Mounting the main unit
- Attach the bracket to the back of the unit in the holes provided. Hang the unit on the edge of the terrarium (image 2).
- Attach the suction cups to the back of the unit in the holes provided. Attach the unit to the glass of the terrarium (image 3).
- Install the main unit and spray pipes as shown on image 4.
- Place the inlet pipe in a clean water source.
Operation
-
When the power is switched on the display will show the duration and cycle one by one.
- Single press the Cycle button and the cycle will be displayed
- Single press the Duration button and the duration will be displayed
-
Spray cycle setting Press the Cycle button for three sec.
The display will start flashing.
You can set the cycle by pressing the Cycle button.
Press the Cycle button for three sec. to save and exit the setting -
Spray Duration setting Press the Duration button for three sec.
The display will start flashing.
You can set the duration by pressing the Duration button.
Press the Duration button for three sec. to save and exit the setting
Note if you don’t press any button for 10 sec. during the setting proces the value will automaticly be saved and you will exit the proces. -
Manual start of stop Press the Turn on/off button for three sec. to manualy start the misting. Press the Turn on/off button to stop the misting. If you dot not manualy stop after 5 min. of operation the system will automaticly shut down.
Recycling
This symbol indicates that this product (if it is discarded) may not be
disposed of with normal household waste. Instead it must be handed in at an
official collection centre (e.g. HWRC). Or can be returned to the dealer when
purchasing a similar new product.
Follow the applicable rules in your country for the separate collection of
electrical and electronic products. Separate collection and recycling are
better for the environment, public health and reduces waste.
Warranty
2 year manufacturer’s warranty on materials and construction defects. Devices
must be returned complete with all components,accompanied with an official
proof of purchase confirming a purchase date for any warranty claims.
Incomplete devices of which parts are missing, and devices without proof of
purchase are not eligible for warranty. After receiving and checking, we will
determine whether the device will be repaired or replaced. For a device
repaired or replaced under warranty, the remaining time of the original
warranty period applies. Carefully read the instructions on installation, use
and maintenance. Damage due to incorrect use, damage due to contamination or
not cleaning the device are not covered by the warranty. Always keep the proof
of purchase, without proof of purchase the warranty will be void!
Produced in China for:
www.aquadistri.com
Vlietweg 8, 4791 EZ Klundert, The Netherlands