Dolaimy House 3372D5 5 Light Gold Linear Chandelier Lighting Fixture Instruction Manual

Dolaimy House 3372D5 5 Light Gold Linear Chandelier Lighting Fixture

Product Information

Specifications

• SKU: #3372D5
• Bulb not included
• Materials: Metal

Product Usage Instructions

Assembly Instructions

WARNING: Do not exceed recommended wattages.

Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We strive to provide the best service for you. We hope you enjoy the shopping experience!

If you have any questions, please feel free to contact us:

Email : [email protected]

Assembly Steps

1. Place Elbow Pipe(S) onto Fixture(P), then secure Hexnuts(N) and Spring Washer(O) into the lip of Elbow Pipe(S). Secure Hexnuts(N) with Allen Wrench(Q).
2. Open the Janitors from Wiring Terminal(R).
3. Insert the white/black wire into the hole of Wiring Terminal(R), then close the Janitors.
4. Place Metal Cap(L) on Lip(K) and secure with Finial(M).
5. Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).
6. Secure Metal Tube(I), Short Tube(H), Long Tube(G) into Lip(J) in order, and secure Canopy(E) into Long Tube(G).
7. Install bulbs (not included) into Socket(T).

FAQ

• Q: Are bulbs included with the product?
  A: No, bulbs are not included. You will need to purchase them separately.

• Q: What should I do if I exceed the recommended wattage?
  A: Do not exceed the recommended wattage as it may cause damage to the product and pose a safety hazard. Please use bulbs within the specified wattage range.

• Q: How do I clean and maintain the product?
  A: To clean, use a soft, dry cloth to wipe the surface of the product. Avoid using harsh chemicals or abrasive materials as they may damage the finish.

Dear customer ,
Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience! Any questions please free to contact us: Email: [email protected]

Assembly Instructions

WARNING

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended watatges

SKU:# 3372D5 (Not included the bulb)

Parts included

Hardware enclosed:

1. Step 1:

2. Remove all parts and hard ware from box along with all plastic protective packaging.

3. Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).

4. Step 2:
   Place Elbow Pipe(S) onto Fixture(P), then secure Hexnuts(N), Spring Washer(O) into the lip of Elbow Pipe(S), and secure Hexnuts(N) with Allen Wrench(Q).

5. Step 3:

6. Open the Janitors from Wiring Terminal (R).

7. Insert the white/black wire into the hole of Wiring Terminal(R), then close the Janitors.

8. Place Metal Cap(L) on Lip(K) and secure with Finial(M).

9. Step 4 : Secure Metal Tube(l), Short Tube(H), Long Tube(G) into Lip(J) in order, and secure Canopy(E) into Long Tube(G).

10. Step5:

11. Gently pull the wire in the ceiling junction box and let the wire hang.

12. Attach Mounting Plate (D) to the junction box.

13. Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.

14. Step6: Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .

15. Step7: Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).

16. Step 8 : Install bulbs(not included) into Socket(T).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>