Dolaimy House 5040X3 Rustic Industrial Iron Rod Chandeliers Lighting Instruction Manual

Dolaimy House 5040X3 Rustic Industrial Iron Rod Chandeliers Lighting

Instruction Manual

Assembly Instructio ns

WARNING

It is strongly suggested that all hardwired fixtures be installed by a professional electrician..

• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E12 TYPE B CFL 6W, LED 4W bulb type and wattages. Do not exceed recommended wattages

SKU:# 3519D10

(Not included the bulb)

Step 1:

Unscrew the Canopy Nuts(F) from the Mounting Plate(D).

Step 2:

1.Straighten Sockets(P) and secure Metal Sleeve(Q) into socket. 2.Place Long Metal Tube(N),Short Metal Tube(O) on Fixture(J) and secure Hexnuts(K), Spring Washer(L)into the lip of metal tube, then secure Hexnuts(K) with Allen Wrench(M).

Step 3:

1.Open the Janitors from Wiring Terminal(R). 2.Insert the white/black wire into the hole of Wiring Terminal(R), then close the Janitors.
3.Place Metal Cap(T) on Threaded Pipe(S) and secure with Finial(U).

Step 4:

1. Secure Tube(G) into Lip(I) and secure Loop(H) into Tube(G).
2. Across wire into Chain(W) and hang up Quick Link(V) into Loop(H).

Step 5:

1. Gently pull the wire in the ceiling junction box and Iet the wire hang.
2. Attach Mounting Plate (D) to the junction
3. Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a

Step 6:

Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .

Step 7:

Place the Canopy (E) against the mounting surface and fasten the Canopy Nuts(F) to the Mounting Plate (D).

Step 8:

Install bulbs(not included) into the Socket.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>