Dolaimy House 3500D1 2 Pack 1 Light Rustic Farmhouse V Lantern Cage Mini Kitchen Island Pendant Light Fixture Instruction Manual
- June 17, 2024
- Dolaimy House
Table of Contents
3500D1 2 Pack 1 Light Rustic Farmhouse V Lantern Cage
Mini Kitchen Island Pendant Light Fixture
Instruction Manual
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 10W bulb types and wattages. Do not exceed recommended wattages
SKU:# 3500D1
(Not included the bulb)
Parts included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Hexnut | 1 |
| I | Threaded Collar | 1 |
| J | Power Cord | 1 |
| K | Socket | 1 |
| L | Plastic Cilp | 1 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us: Email:
[email protected]
Step 1:
- Remove all parts and hardware from box along with all plastic protective packaging.
- Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate(D).
Step 2:
- Unsecure Hexnut (H) from Threaded Collar (I) with Allen Wrench (G).
- Cross Power Cord (J) into Threaded Collar (I) and adjust length as needed.
Secure Hexnut (H) with Allen Wrench (G) and attach Plastic Clip (L) into Power Cord (J).
Step3:
- Gently pull existing wire down from the ceiling junction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step 4:
Connect the white wire of the fixture to the white wire of the supply
circuit. Connect the black wire of the fixture to the black wire of the supply
circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the
Wire Connector (A).
Step 5:
Place the Canopy (E) against the mounting surface and fasten the Canopy
Nuts (F) to the Mounting Plate (D).
Step 6:
- Install bulbs(not included) into the Socket (K).
