anko 43361267 Cushion Cover Crochet Kit Instruction Manual

anko 43361267 Cushion Cover Crochet Kit

Product Information

• Includes:
  • 2 x 100g plain acrylic yarn
  • polyester
  • 4mm crochet hook
  • yarn needle
• Description of the image:
  • A photo of a completed cushion cover featuring four squares with varying textures. Two squares have a solid fill, and the other two have a patterned fill, arranged in an alternating pattern to form the front of the cushion cover.
  • The photos and illustrations shown in this instruction manual are generic. The manufacturer reserves the right to change any specification or feature without prior notice.
• Cushion Cover Crochet Kit
  • Extra supplies needed:
  • 450mm x 450mm cushion insert
  • Scissors
  • Instructions before beginning the project.
  • Note: Instructions are based on UK terms.
• Measurements:
  • (approx) 400mm x 400mm
• Tension:
  • 4 rounds = approx 80mm x 80mm, using a 4mm hook.
• Square (make 4)
  • Begin with a 4mm hook, make 4ch, and join into 1st ch to form a loop.
  • Continue with several chains stated.
  • 1st round – into ch loop make 3ch (counts as first tr), 2tr in ch loop, 3ch, 3tr in ch loop, 3ch, repeat from twice, join with sl st to top of beg 3ch.
  • Continue with rounds 2-8, each with specific instructions.
  • Instructions for rounds 2 to 8 follow a similar pattern, with the number of chains, treble crochet (tr), and slip stitch (sl st) varying as per the round’s requirement. Detailed instructions for each round are provided in the original document.
• Finishing Care Instructions
  • Do not press or iron. Join all squares together. Do not over-stretch when joining. Leave an opening for the cushion insert. Place the insert inside and close the opening.
• Specifications
  • Model No: 4331/362
  • Dimension: 40cm x 40cm
  • Skill level: Intermediate

FAQs

What additional supplies are needed?

- 450mm x 450mm cushion insert and scissors.

Are the instructions in US or UK crochet terms?

The instructions are based on UK terms.

What are the finished dimensions of the cushion cover?

The approximate dimensions are 400mm x 400mm.

Can I iron the cushion cover?

No, do not press or iron the cushion cover.

INTRODUCTION

Cushion Cover Crochet Kit

• Extra supplies needed: 45cm x 45cm cushion insert.
• Read all instructions before beginning the project.
• Note: Instructions are based on UK terms.
• Measurements: (approx) 40cm x 40cm
• Tension: 4 rounds = (approx) 8cm x 8cm, using a 4mm hook.

Installation

Square (make 8)

1. Begin with a 4mm hook, make 4ch, and join to the 1st chain with a slip stitch. Note – ch3 at the beginning of each round counts as 1 tr.
2. 1st round – into chain circle ch3, tr2, chi, tr3, rep from 2 more times, chi, join with si st to top of beg ch3.
3. 2nd round – ch3, tr2 into previous ch sp. into next ch sp, tr3, chi, tr3, rep from 2 more times, into beg ch sp, tr3, cht. join with si st to top of beg ch3.
4. 3rd round – ch3, t/2 into previous ch sp. skip 3tr, into next sp tr3, into next ch sp. tr3, chi, tr3, rep from 2 more times, into beg ch sp. tr3, chi, join with si st to top of beg ch3.
5. 4th round – ch3, tr2 into previous ch sp, skip 3tr, into next 2 sps tr3, into next ch sp. tr3, chi, tr3, rep from 2 more times, into beg ch sp, tr3, chl, join with si st to top of beg ch3.
6. 5th round – ch3, tr2 into previous ch sp. skip 3tr, into next 3 sps tr3, into next ch sp. tr3, chi, tr3, rep from 2 more times, into beg ch sp, tr3, chi, join with si st to top of beg ch3.
7. 6th round – ch3, tr2 into previous ch sp. times, into beg ch sp, tr3, chi, join with si st to top of beg ch3.
8. 7th round – ch3, tr2 into previous ch sp. times, into beg ch sp, tr3, chl, join with si st to top of beg ch3.
9. 8th round – ch3, tr2 into previous ch sp. times, into beg ch sp, tr3, chl, join with si st to top of beg ch3.
10. 9th round – ch3, tr2 into previous ch sp. skip 3tr, into next 7 sps tr3, Into next ch sp. tr3, chl, tr3, rep from 2 more times,  Into beg ch sp, tr3, chl, Join with si st totop of beg ch3.
11. 10th round – ch3, tr 2 into previous ch sp. skip 3tr, into next 8 sps tr3, into next ch sp, tr3, chi, tr3, rep from 2 more times, into beg ch sp, tr3, chi, join with si st to top of beg ch3.
12. Fasten off.

Finishing Care Instructions

• Do not press.
• Dam in all ends.
• Join squares together as pictured, using a whip stitch or mattress st, leaving an opening for a cushion insert.
• Place insert inside and close opening.

Specifications

• Model No:
  • 43361267
• Skill level:
  • Intermediate
• Dimension:
  • 40cm x 40cm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>