anko 43233922 BT Speaker 5W Splashproof Instruction Manual
- June 2, 2024
- Anko
Table of Contents
anko 43233922 BT Speaker 5W Splashproof
Includes
- Speaker
- Charging Cable
Function overview
How to use the speaker
Specifications
- Model No: 43233922
- Bluetooth version: 5.2
Function Operation
- Power ON/ OFF:
- Long press the button to power on /off, and voice instruction will prompt
- Play / Pause: Press the button
- Volume up/ down: click the button
- Answer /hang-up: Press button
- Previous / Next: Long Press the
TWS Speaker function
- Press and hold the button of one speaker, and then two speakers automatically search for connections.
- After the TWS mould is activated, press and hold the MFB button of one of the speakers, the TWS mould ends and the speaker can be used separately.
Note : The TWS function is only available in Bluetooth mode.
Pairing the Speaker with B luetooth® devices
-
Go to Bluetooth Settings on your Bluetooth device (phone, tablet, etc.)
-
Turn the Bluetooth ON on your device
-
Turn on the speaker, it’s ready for pairing when the LED indicator flashes blue quickly.
-
On your Bluetooth Device, select the Bluetooth name: KM 43233922 on the list of available devices . The LED indicator will slowly flash blue once connected. (Troubleshooting tip: if the speaker do not connect to your device, turn the speaker OFF, turn your device’s Bluetooth OFF and then back ON, then repeat the pairing process).
Note : Please enter the word “0000” and click OK if necessary. -
Bluetooth Speaker will automatically connect back to the last connected device. so after restarting, it will automatically connect back to the previous device without re-pairing.
Phone calls
- When there is an incoming call, the unit will pause the playback and ring to alert you of the call.
- To answer the call, press buttons;
- To end a call, press the buttons again.
- To decline an incoming call, press and hold the button for 2 seconds.
Playing music
Press the button once to pause playing, and press to resume playback. Long press again the previous track, press to play down the volume; long press the button shortly to turn the button next track, and press the button shortly to play button the volume.
TF Card Playing
Insert your TF card when the speaker is ON and the voice prompt alerts you, you can play the music from your TF card. Supported audio format: MP3、WAV、WMA、 APE、FLAC、SBC.
Battery Charging
- Use the standard Type-C cable for power charging.
- The LED indicator will turn Red while charging and will turn OFF when fully charged. (Note: Before using for the first time, we recommend you fully charge the battery. A full charge takes around 2 hours).
- When fully charged, unplug the charging cable from the power socket.
Note : When the battery is low, it will automatically turn off after the voice prompt. Do not restart at this time, please charge in time.
FEATURES
- Charging voltage: 5V d.c
- Battery capacity: 1200mAh
- Working Distance: 10 meters
- Music Time: 6 Hours
- Talk time: 5 Hours
- Standby time: More than 200 Hours
- Charge time: 3-4 hours
- Cable length: 30 cm
- Frequency: 80HZ-16KHZ
Non-play automatic power save mode: after 30 seconds the speaker will enter
power save mode and then automatically switch off when the low battery alarm
sounds.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under
license.