CREATIVE PEBBLE X Minimalist USB-C Speakers with Bluetooth and RGB Lighting User Guide
- June 4, 2024
- Creative
Table of Contents
PEBBLE X Minimalist USB-C
Speakers with Bluetooth and RGB Lighting
User Guide
PEBBLE X Minimalist USB-C Speakers with Bluetooth and RGB Lighting
PEBBLE X
MINIMALIST 2.0 USB-C SPEAKERS WITH
BLUETOOTH ® 5.0 AND RGB LIGHTING
****Waste Electrical and Electronic Equipment (WEEE) Symbol The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the product.
Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Speaker, model no. MF1710 is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC.
Overview
| | 
---|---|---
a. 2.25” Full-range Drivers
b. Bluetooth ® / Source Button
- Bluetooth Pairing mode / LED Indicators
****| Select “Pebble X” from the list of discovered Bluetooth devices on your mobile device to pair. Upon successful
pairing, LED will light up in blue
---|--- - Toggling Between Sources
| 
* When the AUX-in cable is detected/connected
---|---
Note : When Creative Pebble X is plugged into a PC / Mac for the first time, it will be in USB Audio mode by default. When plugged into a power source that does not support USB audio for the first time, Creative Pebble X will be in Bluetooth Pairing mode by default
c. RGB Control Button
 d. LED Indicator
| Color Selection mode | Pulsing White |
|---|---|
| USB Audio | Solid Purple |
| Bluetooth Pairing | Blinking Blue |
| Bluetooth Connected | Solid Blue |
| AUX-in | Solid Cyan |
| Mode | LED Indication |
**e.Volume Knob
Disclaimer**: If Pebble X’s volume remains low when both device and speakers
are at max volume while connected to a laptop’s USB port, connect the speakers
to a 10W USB
port instead to achieve optimum volume level
f. RGB Rings
g. Headset / Headphones Port
h. Microphone Port
i. Passive Radiators
j. AUX-in Port
k. USB-C Port
l. USB-C Power Delivery Port
Setting Up Creative Pebble X
Master Reset
Press and hold the Bluetooth button for 8s to perform a Master Reset. Once it is complete, previously paired Bluetooth devices will be removed. Creative Pebble X will then return to its default state.
Other Information
Please visit
creative.com/compliance/PebbleX for
the user guide, safety, and regulatory information, and ErP information where
applicable which is meant strictly for independently qualified professionals.
Please visit creative.com/support/PebbleX for all other support related to
your product.
Technical Specifications
Speaker Power: 2 x 5W RMS
Total System Power: Up to 10W RMS, Peak Power 20W
Drivers: 2.25” Full-range Drivers with Built-in Passive Radiators
Connectivity : USB Audio, Bluetooth, 3.5 mm Analog Stereo-in
Wireless Technology: Bluetooth 5.0
Supported Bluetooth Profiles: A2DP (Advanced Audio Distribution Profile),
AVRCP (Audio / Video Remote Control Profile), HFP (Hands free profile)
Operating Frequency: 2402–2480 MHz
Operating Range: Up to 10m / 33 ft, measured in open space.
Walls and structures may affect a range of device
Supported Codec: SBC
Signal-to-Noise Ratio: ≥ 75 dB
Frequency Response: 80–20,000 Hz
Input: 5V 3A
Maximum RF Output Power: 8 dBm
Maximum Operating Temperature: 45°C
Note:
- Compliance markings are located at the bottom of the product
- Up to 10W RMS while plugged into a 10W USB-C Port / USB-C Power Adapter / 5V ****3A USB Power Adapter
SAFETY & REGULATORY INFORMATION
Creative Pebble Pro
(Model No: MF1710)
Safety & Regulatory Information
Read this instruction carefully and completely before using the product.
Refer to the following information to use your product safely, and to reduce
the chance of electric shock, short-circuiting, damage, fire, hearing
impairment, or other hazards. Improper handling may void the warranty for your
product. For more information, read the warranty available with your product.
- Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
- Do not expose your product to water and moisture. If your product is moisture-resistant, take care not to immerse in water or expose it to rain.
- Clean the product only with a soft, dry cloth.
- Do not dismantle or attempt to repair your product.
- Do not pierce, crush, or set fire to your product
- Keep your product away from strong magnetic objects
- Keep the product, accessories, and packaging parts out of reach of children and pets to prevent accidents. Swallowing and choking hazards.
Warning on Choking Hazard
This product and its accessories may contain small parts which must be kept
away from children.
WARNING
CHOKING HAZARD-Small Parts Not for children under 3yrs.
Creative Pebble Pro (MF1710) Additional Safety and Regulatory information
SAFETY & REGULATORY INFORMATION
The following sections contain notices for various countries.
CAUTION: This product is intended for use with FCC/CE-certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.
Notice for USA
Federal Communication Commission (FCC) Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION : To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be installed with
computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded
and grounded.
Operation with non-certified computers or non-shielded cables may result in
interference to radio or television reception.
MODIFICATION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
Notice for Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To comply with RSS 102 RF exposure compliance requirements, a separation
distance of at least 20cm must be maintained between the antenna of this
device and all persons.
MODIFICATION : Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
SUPPLIER’S DECLARATION OF CONFORMITY
According to CFR Title 47 §2.1077
Importer’s Name: Creative Labs, Inc.
Importer’s Address: 1900 McCarthy Boulevard, Suite 103, Milpitas, CA
95035
Tel: (408)428-6600
declares under its sole responsibility that the product
| Trade Name: | Creative |
|---|---|
| Model Numbers: | MF1710 |
| Product Name: | Creative Pebble Pro |
has been tested according to the FCC / CISPR22 requirement for Class B devices
and found compliant with the following standards:
EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B & C Complies with
Canadian ICES-003 Class B & RSS-247 standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesirable operation.
Supplementary Information:| Thinh Bui
Compliance Manager
Creative Labs, Inc.
24th Oct 2022
---|---
European Compliance
This product complies with all applicable directives. A copy of the EU DoC is
available on the Creative website.
CAUTION : To comply with the Europe CE requirement, this device must be
installed with CE-certified computer equipment which meets Class B limits.
All cables used to connect this device must be shielded, grounded, and no
longer than 3m in length.
Operation with non-certified computers or incorrect cables may result in
interference with other devices or undesired effects on the product.
MODIFICATION : Any changes or modifications not expressly approved by
Creative Technology Limited or one of its affiliated companies could void the
user’s warranty and guarantee rights.
The insulating coating on the device also serves the purpose of ESD
protection.
Notice for Korea
Class B Equipment
(For Home Use Broadcasting & Communication Equipment)
This equipment is home use (Class B) electromagnetic wave suitability
equipment and is to be used mainly at home and it can be used in all areas.
Vietnam RoHS Statement
This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in a concentration greater than the Maximum Limit value as specified in the Circular.
| Substance | Maximum Limit (ppm) 1, 2 |
|---|---|
| lead | 1000 |
| Mercury | 1000 |
| cadmium | 100 |
| hexavalent chromium | 1000 |
| polybrominated biphenyls (PBB) | 1000 |
| polybrominated diphenyl ethers (PBDE) | 1000 |
1 Maximum Limit does not apply to applications exempted from the Circular.
2 Maximum Limit refers to concentration by weight in homogeneous materials.
Notice for Australia
Notice for Malaysia
Notice for Singapore
Complies with IMDA Standards DA107311
REGISTER YOUR PRODUCT
creative.com/register| TECHNICAL SUPPORT
creative.com/support
---|---
2022 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. And any use of such marks by Creative is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. The actual product may differ slightly from the images shown. Use of this product is subject to a limited warranty.
2400-2483.5 MHz
Creative Pebble X
References
- Creative Technology - Declaration of Conformity
- Creative Technology - Online Product Registration
- Creative Worldwide Support
- Creative Worldwide Support
- Creative Labs (United States) | Sound Blaster Sound Cards, Super X-Fi, Speakers and Soundbars, Webcams, Headphones and Gaming Headsets
- Creative Technology - Declaration of Conformity
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>