VEVOR JM-L38 Laser Lamp User Manual
- June 2, 2024
- VEVOR
Table of Contents
VEVOR JM-L38 Laser Lamp
Product Specifications
- Model: JM-L38
- Product Name: LASER LAMP
- Manufacturer: VEVOR
- Website: www.vevor.com/support
Product Usage Instructions
General Safety Rules
Warning: To reduce the risk of injury, user must read instructions manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.
Warning: Be sure to wear eye protectors when using this product.
CAUTION: While the product is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes. Glasses may be supplied in some of the laser tool kits. These are NOT certified safety glasses. These glasses are ONLY used to enhance visibility of beam in brighter environments or at greater distances from laser source.
Important Safety Instructions
- Read the Safety Instructions and User Manual thoroughly before using this product.
- Avoid staring directly into the laser beam or viewing it directly with optical instruments.
- Do not disassemble the laser tool as there are no user-serviceable parts inside.
- Avoid modifying the laser in any way as it may result in hazardous Laser Radiation Exposure.
- Do not operate the laser around children or allow children to operate it to prevent serious eye injury.
- An exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds.
FAQ
Q: What should I do if I accidentally expose my eyes to the laser beam?
A: If you accidentally expose your eyes to the laser beam, immediately move away from the source and seek medical attention if you experience any discomfort or vision issues.
We continue to be committed to provide you tools with at competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product
GENERAL SAFETY RULES
| Symbol | Symbol Description |
|---|---|
| **** | Warning – To reduce the risk of injury, user must read the instructions |
manual carefully.
| This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This product may cause harmful interference. 2)This product must accept any interference received,
including interference that may cause undesired operation. WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance
could void the user’s authority to operate the product.
****| Warning- Be sure to wear eye protectors when using this product.
WARNING:
- Read the Safety Instructions and User Manual thoroughly before using this product. All users must fully understand and adhere to these instructions.
CAUTION:
- While the product is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
- Glasses may be supplied in some of the laser tool kits. These are NOT certified safety glasses. These glasses are ONLY used to enhance the visibility of beam in brighter environments or at greater distances from the laser source.
WARNING:
- The following label/print samples are placed on the product to inform of the laser class for your convenience and safety.
- Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level.
- Do not disassemble the laser tool. There are no user-serviceable parts inside.
- Do not modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
- Do not operate the laser around children or allow children to operate the laser.
- Serious eye injury may result.
- An exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.
Product Parameter
| Model | JM-L38 |
|---|---|
| Voltage Frequency | AC120V 60Hz |
| Power Rating | 30 W |
Product Light Source
| Strobe light, pattern light, magic ball light, red and green beam; Can be
mixed into up to 100 patterns and 200 graphics Strobe light, pattern light,
magic ball light, red and green beam; Can be mixed into up to 100 patterns and
200 graphics.
Operating Mode| AUTO/ Voice Control /DMX/ Master/Slave/Remote Control
Description OF Products
| NO | Primary Menu | Sub menu | Function Declaration | Button Operation |
|---|---|---|---|---|
| 1 | A001-511 | A001-511 | DMX |
2
|
LA**- laser mode
| LA oF| Full shut down of laser|
LA Au
| Laser partial automatic mode, go built-in program|
LA r| Red laser light|
LA G| Green laser light|
LArG| Red&Green laser light|
LA01~LA20| Automatically change color, the greater the value, the faster the
change|
SP 1~9
| The screen flashes, the laser motor speed,
the greater the value, the faster the
speed
|
Press Enter to enter
3
|
LE**- super arrow mode
| LE 1| Red light|
LE 2| Greenlight|
LE 3| Blue light|
LE 4| Monochromatic jump|
LE 5| Mixed color jump|
LE 6| Strobe|
LE 7| Auto-repeat PA 4~6 mode|
Sd 1~9| The screen flashes PA 4~7 speed adjustment| Press Enter to enter
| |
SP 1~9
| The screen flashes, and the greater the speed of the super arrow motor, the faster the speed| Press Enter to enter
4
| FL** strobe mode| FLoF| No strobe|
---|---|---|---|---
FL 1~9
| Strobe, the greater the value, the slower the strobe|
5
|
PA** go bo mode
| PA 1| Red light|
PA 2| Greenlight|
PA 3| Blue light|
PA 4| White light|
PA 5| Monochromatic jump|
PA 6| Mixed colour jump|
PA 7| Strobe|
PA 8| Auto-repeat PA 4~6 mode|
Sd 1~9| The screen flashes PA 4~7 speed adjustment| Press Enter to enter
SP 1~9
| Screen flashing Go bo motor speed, the greater the value, the faster the
speed| Press Enter to enter
6| Auto| Auto| Auto mode|
7
|
S1**
|
S101~S120
| In voice control mode, the latter two numbers indicate the sound control count|
bLon/oF
| The screen flashing “on” means no sound control, and “OF” means no sound, no lights| Press Enter to enter
uoL1~uoL9
| Screen flashing, sound control sensitivity adjustment, the greater the data, the higher the sensitivity| Press Enter to enter
DMX
| CH | Numerical | Function |
|---|
1
| 0~9| Gobo LED pass
10~255| Gobo color interval 16 is a color
2
| 0~9| Super arrow pass
10~44| Super arrow red light
45~79| Super arrow Greenlight
80~114| Super arrow Blue light
115~149| Super arrow Red&Green light
150~184| Super arrow Green&Blue light
185~219| Super arrow Red&Blue light
220~255| Super arrow Red&Green&Blue light
3
| 0~9| Laser pass
10~99| Laser Red light
100~199| Laser Green light
200~255| Laser Red&Green light
4
| ****
0~9
| Strobe pass,according to fifth channel enable channels 1,
2, and 3
10~255
| Strobe led open, the larger the number, the slower the
strobe
5
| ****
0~255
| The first 4 channels allow you to select the following
number as the valid channel number
0~16| 1、2、3、4
17~33| 1
34~50| 2
51~67| 3
68~84| 4
85~101| 1、2
102~118| 3、4
119~135| 2、4
| 136~152| 1、4
---|---|---
153~169| 1、3
170~186| 2、4
187~203| 1、2、3
204~220| 1、2、4
221~237| 1、3、4
238~255| 2、3、4
6
| 0~9| The Gobo motor don’t turn
10~127
| The Gobo motor of the pattern is turning, the greater the
value, the slower the motor is
128~255
| Gobo motor inversion, the greater the value, the faster
the motor speed
7
| 0~9| The super arrow motor doesn’t turn
10~255
| The greater the value of the Super arrow motor, the
slower the speed of the motor
8
| 0~9| The laser motor doesn’t turn
10~127
| The laser motor of the pattern is turning, the greater the
value, the slower the motor is
128~255
| Laser motor inversion, the greater the value, the faster
the motor speed
9
| 0~50| The first 8 channels operate effectively
51~150| Automatic mode
151~255| Audio Mode
Fault Analysis
| Questions | Analysis of causes | Countermeasure |
|---|
The light is out.
| ****
Whether the plug is properly inserted.
| 1、Put the plug in place.
2、Check that the lights are plugged in properly.
The lights are dim.| Whether the voltage is correct.| ****
Use the right power source.
Technical Support and E-Warranty Certificate