pyxis ST-71X Series Inline pH Sensor User Manual

June 8, 2024
Pyxis

pyxis-logo pyxis ST-71X Series Inline pH Sensor

pyxis-ST-71X-Series-Inline-pH-Sensor-product

Wiring Guides

ST-710 & ST-711

  • Depending on the controller, you may need to add a jumper from 24V- (Power Ground) to 4–20mA-

ST-712

Using uPyxis®

Place your sensor into the necessary Pyxis Lab® pH or OPR solution, then on uPyxis® select your desired Calibration Method & enter the specific concentration. Press ‘Calibrate’ to finish!pyxis-ST-71X-Series-Inline-pH-
Sensor-fig-3

Under ‘Diagnosis’ you can send diagnostic information straight to our Customer Service department. Under ‘Device Info’ you can customize Device Name, Product Name & Modbus Address!pyxis-ST-71X-Series-Inline-pH-Sensor-
fig-4

Download the app!

Documents / Resources

| pyxis ST-71X Series Inline pH Sensor [pdf] User Manual
ST-71X Series Inline pH Sensor, ST-71X Series, Inline pH Sensor, pH Sensor
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals