ATEN ES0154-AX-U 54 Port Layer 2 Plus Gigabit Ethernet Managed Switch User Guide
- June 2, 2024
- Aten
Table of Contents
ATEN ES0154-AX-U 54 Port Layer 2 Plus Gigabit Ethernet Managed Switch
Hardware Overview
- system and power LEDs
- 10/100/1000M RJ-45 ports (ES0154) / 10/100/1000M RJ-45 PoE+ (IEEE 802.3at) ports (ES0154P)
- 10/100/1000M RJ-45 PoE++ (IEEE 802.3bt) ports (ES0154P only)
- 1/10/25G SFP28 ports
- PoE LED and mode button (ES0154P only)
- console ports (2 x RJ-45 / 1 x USB Type-A port)
- grounding terminal
- power socket
Installation
-
Use a grounding wire to ground the unit by connecting one end to the grounding terminal and the other end to a suitable grounded object.
Note: Do not omit this step. Proper grounding helps prevent damage to the unit from power surges or static electricity. -
Connect the power cord to the unit’s power socket.
-
Connect a CCKM server to the unit’s 10/100/1000M RJ-45 port (ES0154) /10/100/1000M RJ-45 PoE+ (IEEE 802.3at) port (ES0154P).
-
Connect up to 47 KE series extenders to the unit’s 10/100/1000M RJ-45 ports (ES0154) / 10/100/1000M RJ-45 PoE+ (IEEE 802.3at) ports (ES0154P).
Operation
Setting Up the IP Address of CCKM Server
-
From the CCKM server web GUI, go to Network and Sharing Center > Change Adapter Settings.
-
Right-click on your Local Area Connection and select Properties.
-
In the Local Area Connection Properties window, highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.
-
Select Use the Following IP Address and enter the IP of the CCKM server (e.g., any IP address not in use, and in between 192.168.0.2 and 192.168.0.253)*, Subnet Mask (e.g., 255.255.255.0), and Default Gateway that corresponds with your network setup.
Note: Make sure the CCKM server’s IP address is not duplicated to prevent IP address conflict. -
Click OK to change the CCKM server’s IP address.
To connect to the CCKM server via web browser, enter the IP address and port number (default: 8443) of the CCKM server. For example, if the IP address is 192.168.0.10, enter https://192.168.0.10:8443.
Package Contents
- 1 ES0154 / ES0154P 54-Port Layer 2+ Gigabit Ethernet Managed Switch/ 54-Port Layer 2+ Gigabit Ethernet Managed Switch with PoE
- 1 power cord
- 1 RJ-45 to DB9 serial console cable
- 1 grounding wire
- 6 port dust covers
- 1 mounting kit
- 1 user instructions
Support and Documentation Notice
All information, documentation, firmware,software utilities, and specifi
cations contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>