IMETEC R9601 Hair Dryer User Manual

June 2, 2024
IMETEC

IMETEC R9601 Hair Dryer

IMETEC R9601 Hair Dryer

INTRODUCTION

Dear customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and manufactured with customer satisfaction in mind. These instructions for use are compliant with the European Standard EN 82079.

WARNING! Instructions and warnings for safe use.

Before using this appliance, carefully read the instructions for use and in particular the safety notes and warnings, which must be complied with. Keep this manual together with its illustrative guide for future consultation. Should you transfer the appliance to another user, make sure you hand over this documentation as well.

SymbolNOTE: should any part of this manual be difficult to understand or any doubt arise, contact the company at the address indicated on the last page before using the appliance.

Symbol**NOTE:** persons with impaired vision may consult these instructions for use in digital format at the website www.tenactagroup.com

SAFETY NOTES

  •  After unpacking, make sure the appliance is intact, complete with all its parts as shown in the illustrative guide and with no sign of damage. If in any doubt, do not use the appliance and contact an authorised service centre.

CAUTION! Remove any communication material such as labels, tags etc. from the appliance before use.

WARNING! Risk of suffocation. Children shall not play with the packaging. Keep the plastic bag out of the reach of children.

  • This appliance must only be used for the purpose for which it was designed, namely as a hairdryer for home use. Any other use is considered not compliant to the intended use and therefore dangerous.

  • Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply. The rating is on the appliance or on the power supply unit, if any (see illustrative guide).

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

  • Symbol DO NOT use the appliance with wet hands, damp feet or barefoot.

  • Symbol DO NOT pull the supply cord or the appliance itself to remove the plug from the socket.

  • Symbol DO NOT pull or lift the appliance by the supply cord.

  • Symbol DO NOT expose the appliance to humidity, to the effects of weather (rain, sun, etc.) or to extreme temperatures.

  • DO NOT leave the appliance unattended while it is connected to the power supply.

  • Always disconnect the appliance from the mains supply before cleaning or performing maintenance and when the appliance is not in use.

  • If the appliance is faulty or malfunctions, switch it off and do not tamper with it. Contact an authorised technical service centre for any repairs.

  • If the supply cord is damaged it must be replaced by an authorised technical service centre, so as to prevent all risks.

  • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.

  • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA (ideal 10 mA) is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
    WARNING! DO NOT use this appliance near bathtubs, showers, basins or other vessels containing water.

  • This appliance shall not come into contact with water, other liquids, sprays, steam. For any cleaning and maintenance operation refer to the instructions in the relevant chapter.

  • This appliance must only be used on human hair. DO NOT use the appliance on animals or on wigs and hair pieces made of synthetic material.

  • Symbol DO NOT obstruct the intake filter and always keep it free from dust and hair.

  • See the external packaging for the characteristics of the appliance.

  • Use the appliance only with the supplied accessories that are an essential part of the appliance.

SYMBOLS

| Warning
---|---
Symbol| Prohibited
| Note
| Class II equipment
| Not suitable for use in the bath, shower or water-filled reservoir
| On/off
| Air flow
| Air temperature
| Cold air-alternating cold/hot air-turbo function
| Intake filter opening
| Intake filter closing

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Refer to page I of the Illustrative Guide to check the contents of the package. All the figures are found on the inside pages of the cover.

  1. Intake filter
    1A. Filter
    1B. Filter cap

  2. Adjustment buttons
    2A. Air flow selection
    2B. Air temperature selection
    2C. Cold air – alternating cold/hot air – turbo function selection
    2D. On/Off

  3. LED
    3A. Air flow LEDs (white)
    3B. Air temperature LEDs (red)
    3C. Cold air LED (white), alternating cold/hot air LED (white/ red)

  4. Power cable

  5. Technical data

  6. Front grid
    6.A Dual action ionizer

  7. Accessories that attach with magnets
    7A. Drying nozzle
    7B. Styling nozzle
    7C. Diffuser
    Description Of The Appliance And Its Accessories
    Description Of The Appliance And Its Accessories

For the appliance features, refer to the external packaging. Use the supplied accessories only.

USE OF ACCESSORIES

The hair dryer is provided with the accessories described above. The accessory is mounted on the appliance by pressing it onto the front part of the hair dryer (5) until it is inserted. Make sure that the accessory is attached correctly. After use, they can be removed by detaching them from the front attachment (6). The accessories can rotate 360°.

Drying and styling nozzle (7A/7B)
Use the styling nozzle to direct the air jet as you wish.

Diffuser (7C)

The diffuser is only to be used on damp hair in order to obtain a natural hair style or a natural drying effect:

  • Take a lock of hair and twist it in the diffuser. Make sure that even the ends are entered.
  • Then switch the hair dryer on at medium speed and maximum temperature to dry your hair.

For greater volume:

  • Switch the hair dryer on at minimum speed and temperature.
  • Place the diffuser directly on your hair and move it from the bottom upwards, as though you wanted to lightly massage your scalp.

IMPORTANT: use only the original accessories of the appliance.

USE

WARNING! This appliance is not to be used if it has been dropped or if there are visible signs of damage.

WARNING! DO NOT use this appliance near bathtubs, showers, basins or other vessels containing water. Never place the appliance into water.

WARNING! Risk of fire. DO NOT use flammable products on hair or on the appliance.

Refer to the figure in the illustrative guide of the instructions for use.

Appliance with separate keys for:

  • on/off (2D)
  • air flow selection (2A)
  • air temperature selection (2B)
  • cold air – alternating cold/hot air – turbo function selection (2C)
  • On/Off button
  • 0 = OFF I = on

SymbolNOTE: This hair dryer has a memory function. In subsequent uses after the first, the appliance automatically sets the last selected setting each time it is turned on.

Air flow selection key (2A)

To select the desired air flow, press the air flow selection key (2A).
The white LEDs (3A) indicate the setting being used.

gentle air flow

medium air flow

strong air flow

Air temperature selection key (2B)

To select the desired air temperature, press the air temperature selection key (2B)

The red LEDs (3B) indicate the setting being used.

low temperature
medium temperature
 high temperature

Cold air – alternating cold/hot air – turbo function selection key (2C)

Press the cold air – alternating cold/hot air – turbo function key (2C) to activate one of the three options:

  • Press once to activate cold air (the white LED (3C) indicates the selected setting).
  • Press twice to activate the alternating cold/hot air flow (the white and red LEDs (3C) turn on alternately to indicate the selected setting).
  • Press again to return to the last selected air flow/ temperature combination.
  • Hold the key for 10/15 seconds to activate the turbo function, with maximum temperature and strong air flow (the 3 white LEDs (3A) of the air flow key indicate the setting selected when turned on).
  • Press again to exit the turbo function and return to the last selected air flow/temperature combination.

Ionizer (6A)

  • This appliance is equipped with a double action ionizer (6A) to keep the hair hydrated during drying. This function is automatically activated when the appliance is switched o

MAINTENANCE AND CLEANING

WARNING! Always disconnect the appliance from the mains before cleaning or performing maintenance.

WARNING! Make sure all cleaned parts are completely dry before reusing the appliance

Cleaning the appliance and accessories

Clean the appliance and the accessories (diffuser, nozzle) with a damp cloth when needed. Do not use solvents or other aggressive or abrasive detergents. Otherwise, the surface could be damaged. Check the intake opening of the appliance regularly and remove all hair and dust.

Cleaning the intake filter (1)

If the appliance is provided with an intake filter, clean it as follows:

  • Open the filter cap (1B), as indicated in figure 8.
  • Wipe the front and rear of the retina (1A) and the filter cap (1B) with a damp cloth.
  • Have the piece dried completely and put it back on.

Symbol NOTE: the more dust is present in the place where the hair dryer is used, the more often the filter must be cleaned.

STORAGE

WARNING! Risk of fire. Wait for the appliance to cool completely before storing it.

WARNING! DO NOT wrap the supply cord around the appliance.

DISPOSAL

Symbol The packaging of the appliance is made of recyclable materials. Dispose of it in accordance with the environmental protection regulations.

Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the crossed bin symbol on the appliance or its packaging indicates that the appliance must be disposed of separately from other waste at the end of its useful life.

The user must therefore take the appliance to an appropriate recycling centre for electrical and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic products measuring less than 25 cm to retailers of electronic products having a sales area of at least 400 m2 free of charge and with no obligation to buy. Appropriate separate collection for the subsequent procedure for the decommissioned appliance for recycling, which includes treatment and environmentally friendly disposal helps prevent adverse effects on the environment and health and promotes reusing and/or recycling materials that the appliance consists of.

ASSISTANCE AND WARRANTY

The appliance is guaranteed for a period of two years from the date of delivery. Evidence shall be taken as the date indicated on the receipt/invoice (provided it is legible), unless the buyer can prove that the delivery occurred later.

In the event of a defect in the product which existed prior to the date of delivery, appliance repair or replacement is guaranteed free of charge, unless one of the two solutions is disproportionate to the other. The buyer has the obligation to notify an authorised Service Centre of the non-conformity within two months from discovering the defect.

The warranty does not cover any part that may be defective due to:

a. transport damage or accidental drops,
b. incorrect installation or an inadequate electrical system,
c. repairs or alterations made by unauthorised personnel,
d. poor or incorrect maintenance and cleaning,
e. product and/or product parts subject to wear and/or consumables, including the reduction in battery usage time due to the use or time, if present,
f. failure to comply with the operating instructions and/or negligent or careless use.
g. Twisted or bent power cord due to negligence or pulled,
h. Presence of hair in the fan,
i. Failure to clean the cold air inlet filter causing the motor to overheat,
j. Accidental falling during use,
k. Obstruction at the cold air inlet and hot air outlet (front and rear grid),
l. Use of non-original maintenance components or accessories,
m. Use of chemical products to clean the appliance,
n. Use of hairspray or other sprays during use

The list above is purely indicative and not exhaustive and in any case, this warranty shall not cover all circumstances that cannot be attributed to manufacturing defects of the appliance.

In addition, the warranty does not cover any case of improper use of the appliance and professional use. All liability is disclaimed for any damage that may directly or indirectly be caused to persons, property and pets as a result of failure to comply with all the instructions provided in the “Instructions and Warnings Booklet” regarding appliance installation, use and maintenance. This is without prejudice to any contractual warranty claims against the seller.

Methods of support

Appliance repairs must be carried out by an authorised Service Centre. If the faulty appliance is under warranty, it must be sent to the Service Centre together with a fiscal document that can confirm the date of sale or delivery.

Customer Support

Symbol

www.imetec.com

Tenacta Group S.p.A Via Piemonte, 5/11 24052 AZZANO S. PAOLP (BG) ITALY

800-234677

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals