IMETEC S0701 Hair Dryer User Guide
- June 10, 2024
- IMETEC
Table of Contents
S0701 Hair Dryer
Product Information
The product is a hair dryer with the model number TYPE S0701. It comes with an illustrative guide that includes various figures such as 7A, 7B, 7, 7C, and 7D. The hair dryer has a total of seven components, including a technical data section that contains important information about the product.
Technical Data
The technical data section contains information such as the product’s power
output, voltage rating, and other important specifications. This information
is crucial for safe and effective use of the product.
Product Usage Instructions
Before using the hair dryer, ensure that it is properly connected to a suitable power source. The hair dryer should only be used with the voltage rating specified in the technical data section.
Next, select the appropriate heat and speed settings using the controls located on the hair dryer. It is important to start with the lowest heat and speed settings and gradually increase them as needed. This will help prevent damage to your hair.
Hold the hair dryer at a distance of at least six inches from your hair and direct the airflow in the desired direction. Move the hair dryer continuously to prevent overheating of any one area of your hair.
Once you have finished using the hair dryer, turn it off and unplug it from the power source. Allow it to cool down before storing it in a safe place.
It is important to regularly clean the air intake grill and filter of the hair dryer to ensure optimal performance. Refer to the illustrative guide for detailed instructions on how to clean these components.
INTRODUCTION
Dear customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and manufactured with customer satisfaction in mind. These instructions for use are compliant with the European Standard EN 82079.
WARNING! Instructions and warnings for safe use.
Before using this appliance, carefully read the instructions for use and in particular the safety notes and warnings, which must be complied with. Keep this manual together with its illustrative guide for future consultation. Should you transfer the appliance to another user, make sure you hand over this documentation as well.
NOTE: should any part of this manual be difficult to understand or any
doubt arise, contact the company at the address indicated on the last page
before using the appliance.
NOTE: persons with impaired vision may consult these instructions for use
in digital format at the website www.tenactagroup.com
SAFETY NOTES
-
After unpacking, make sure the appliance is intact, complete with all its parts as shown in the illustrative guide and with no sign of damage. If in any doubt, do not use the appliance and contact an authorised service centre.
CAUTION! Remove any communication material such as labels, tags etc. from the appliance before use.
WARNING! Risk of suffocation. Children shall not play with the packaging. Keep the plastic bag out of the reach of children. -
This appliance must only be used for the purpose for which it was designed, namely as a hairdryer for home use. Any other use is considered not compliant to the intended use and therefore dangerous.
-
Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply. The rating is on the appliance or on the power supply unit, if any (see illustrative guide).
-
This appliance can work automatically at a frequency of 50 Hz or 60 Hz.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
DO NOT use the appliance with wet hands, damp feet or barefoot.
-
DO NOT pull the supply cord or the appliance itself to remove the plug from the socket.
-
DO NOT pull or lift the appliance by the supply cord.
-
DO NOT expose the appliance to humidity, to the effects of weather (rain, sun, etc.) or to extreme temperatures.
-
DO NOT leave the appliance unattended while in operation.
-
DO NOT leave the appliance unattended while it is connected to the power supply.
-
Always disconnect the appliance from the mains supply before cleaning or performing maintenance and when the appliance is not in use.
If the appliance is faulty or malfunctions, switch it off and do not tamper with it. Contact an authorised technical service centre for any repairs.
If the supply cord is damaged it must be replaced by an authorised technical service centre, so as to prevent all risks. -
When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
-
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA (ideal 10 mA) is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
WARNING! DO NOT use this appliance near bathtubs, showers, basins or other vessels containing water. -
This appliance shall not come into contact with water, other liquids, sprays, steam. For any cleaning and maintenance operation refer to the instructions in the relevant chapter.
-
This appliance must only be used on human hair. DO NOT use the appliance on animals or on wigs and hair pieces made of synthetic material.
-
DO NOT obstruct the intake filter and always keep it free from dust and hair.
-
See the external packaging for the characteristics of the appliance.
-
Use the appliance only with the supplied accessories that are an essential part of the appliance.
ADDITIONAL SAFETY NOTES
NOTE: Currently the fitting in a bathroom of an electrical socket for, or
capable of, operating the appliance, is not permitted in the UK (see BS7671).
Nevertheless, E.C Standard EC60335-2-23 requires us to advise you the following:
- When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the straighteners are switched off.
- For an additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Your electrician will advise you of this.
CONNECTION TO THE MAINS SUPPLY
Please check that the voltage stated on the appliance corresponds to the
voltage of your power supply. This appliance is fitted with a 13 A plug
complying to BS 1363. If this plug does not fit to your socket or needs to be
replaced please note the following:
Your appliance is fitted with a two core mains lead and as it is double
insulated, it does not require an earthing.
NON RE-WIREABLE MAINS PLUG
If your appliance is supplied with a non rewireable plug fitted to the power
cord, it is equipped with a fuse. The value of the fuse is indicated on the
case of the plug or in the fuse carrier. If the fuse has to be replaced, only
use an ASTA approved one that meets BS1362.
If the fuse cover is lost, the plug must not be used until a replacement is
obtained from an electrical EN supplier.
If you need to remove the plug, cut it from the mains lead and immediately
dispose of it. Never attempt to re-use the plug or insert it into a socket
outlet as there is a high risk of an electric shock.
SYMBOLS
Not suitable for use in the bath, shower or waterfilled reservoir
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to page I of the Illustrative Guide to check the contents of the package. All the figures are found on the inside pages of the cover.
- Intake filter
- A Filter
- B Filter cap
- Ioniser LED
- Power cable
- Adjustment buttons
- A On/Off
- B Air flow selection
- C Air temperature selection
- D Cool air
- Technical data
- Front grille
- Accessories
- A. Smooth styling nozzle
- B. Wavy styling nozzle
- C. Flat diffuser for delicate drying
- D. Diffuser
For the appliance features, refer to the external packaging. Use the supplied accessories only.
USE OF ACCESSORIES
The hair dryer is provided with the accessories described above. The accessory
is mounted on the appliance by pressing it onto the front part of the hair
dryer (6) until it is inserted. Make sure the accessory is properly attached.
After use, remove it by detaching it from the front part (6).
Smooth styling nozzle (7A)
Starting from the nape of your neck, divide your hair into sections and work
one lock at a time, with a round brush. Holding the brush horizontally,
position the base of the lock of hair (near the roots) in the middle of it.
Bring the nozzle close to the brush – just 1 or 2 cm away. Work the lock of
hair from the roots to the tips. Repeat until that section of hair is
completely dry.
Wavy styling nozzle (7B)
Starting from the nape of your neck, divide your hair into sections and work
one lock at a time, with a round brush. To obtain a soft effect, keep the
brush tilted and position the base of the lock of hair (near the roots) in the
middle of it. The nozzle should adhere perfectly to the brush. Work the lock
of hair from the roots to the tips. Repeat until that section of hair is
completely dry.
To give more movement, wind the section of hair around the brush from the tips
to the roots. Keep it like this to dry the hair, making sure the nozzle
adheres perfectly to the brush. Release the lock of hair.
Flat diffuser for delicate drying (7C)
For natural, delicate drying: keep the diffuser 5 – 10 cm from your hair and
move the hair-dryer slowly so as to dry without tousling.
For anti-frizz drying that keeps your hair under control: use a flat
detangling brush and make sure the accessory adheres perfectly to the brush.
Brush from the roots to the tips, until your hair is completely dry.
Diffuser (7D)
Only use the diffuser with damp hair, to obtain a naturally combed or
naturally dried effect:
- Take a lock of hair in your hand and wind it into the diffuser. Make sure all OF the hair is inserted, right up to the ends.
- Switch on the hair dryer at the medium speed and maximum temperature to dry the lock of hair.
For greater volume:
- Switch the hair dryer on at minimum speed and temperature.
- Place the diffuser directly on your hair and move it from the bottom upwards, as though you wanted to lightly massage your scalp.
IMPORTANT: use only the original accessories of the appliance.
USE
WARNING! This appliance is not to be used if it has been dropped or if
there are visible signs of damage.
WARNING! DO NOT use this appliance near bathtubs, showers, basins or
other vessels containing water. Never place the appliance into water.
WARNING! Risk of fire. DO NOT use flammable products on hair or on the
appliance.
Refer to the figure in the illustrative guide of the instructions for use. Device with separate buttons for:
- on/off (4 A)
- air flow selection (4B)
- air temperature selection (4C)
- cool air flow (4D)
On/Off button (4A)
Press this button to switch the appliance on.
NOTE: this hair dryer has a memory function. After using it the first
time, the next time it will then automatically set the last temperature
selected.
Air flow selection button (4B)
- ◦ = medium air flow
- ◦◦ = strong air flow
Air temperature selection button (4C)
Press the air temperature selection button (4C) to select the required air
temperature.
The red LEDs indicate the setting being used.
- LED = low temperature
- LEDs = medium temperature
- LEDs = high temperature
Cool air flow button (4D)
The blue LEDs indicate that the function is active.
This appliance uses ion technology to keep your hair hydrated while it is
being dried. This function is activated automatically when the appliance is
switched on.
WARNING! If the appliance suddenly stops working while you are using it, check the suction filter (1) on the back to make sure it isn’t clogged with dust or hair. If it is, switch the appliance off for a few minutes and clean the filter (1) following the instructions, then switch it back on.
MAINTENANCE AND CLEANING
WARNING! Always disconnect the appliance from the mains before cleaning
or performing maintenance.
WARNING! Make sure all cleaned parts are completely dry before reusing
the appliance.
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle) with a damp cloth
when needed. Do not use solvents or other aggressive or abrasive detergents.
Otherwise, the surface could be damaged. Check the intake opening of the
appliance regularly and remove all hair and dust.
Cleaning the intake filter (1)
If the appliance is provided with an intake filter, clean it as follows:
- Open the filter cap (1B) as shown in the figure.
- Wipe the front and rear of the retina (1A) and the filter cap (1B) with a damp cloth.
- Let the parts dry well and put them back on in inverse order.
NOTE: the more dust is present in the place where the hair dryer is used, the more often the filter must be cleaned.
STORAGE
- WARNING! Risk of fire. Wait for the appliance to cool completely before storing it.
- WARNING! DO NOT wrap the supply cord around the appliance.
- WARNING! Store the appliance so that no object may accidentally go into and damage it.
DISPOSAL
The packaging of the appliance is made of recyclable materials. Dispose of it
in accordance with the environmental protection regulations.
Pursuant to Regulation on waste electrical and electronic equipment (WEEE),
the crossed bin symbol on the appliance or its packaging indicates that the
appliance must be disposed of separately from other waste at the end of its
useful life. The user must therefore take the appliance to an appropriate
recycling centre for electrical and electronic equipment. Alternatively,
instead of handling the disposal, the user can hand over the appliance to the
retailer when a new, equivalent one is purchased. The user can hand over
electronic products measuring less than 25 cm to retailers of electronic
products having a sales area of at least 400 m2 free of charge and with no
obligation to buy. Appropriate separate collection for the subsequent
procedure for the decommissioned appliance for recycling, which includes
treatment and environmentally friendly disposal helps prevent adverse effects
on the environment and health and promotes reusing and/or recycling materials
that the appliance consists of.
ASSISTANCE AND WARRANTY
The appliance is guaranteed for a period of two years from the date of
delivery. Evidence shall be taken as the date indicated on the receipt/invoice
(provided it is legible), unless the buyer can prove that the delivery
occurred later.
In the event of a defect in the product which existed prior to the date of
delivery, appliance repair or replacement is guaranteed free of charge, unless
one of the two solutions is disproportionate to the other. The buyer has the
obligation to notify an authorised Service Centre of the non-conformity within
two months from discovering the defect.
The warranty does not cover any part that may be defective due to:
- Transport damage or accidental drops,
- Incorrect installation or an inadequate electrical system,
- Repairs or alterations made by unauthorized personnel,
- Poor or incorrect maintenance and cleaning,
- Product and/or product parts subject to wear and/or consumables, including the reduction in battery usage time due to the use or time, if present,
- failure to comply with the operating instructions and/or negligent or careless use.
- Twisted or bent power cord due to negligence or pulled,
- Presence of hair in the fan,
- Failure to clean the cold air inlet filter causing the motor to overheat,
- Accidental falling during use,
- Obstruction at the cold air inlet and hot air outlet (front and rear grid),
- Use of non-original maintenance components or accessories,
- Use of chemical products to clean the appliance,
- Use of hairspray or other sprays during use.
The list above is purely indicative and not exhaustive and in any case, this
warranty shall not cover all circumstances that cannot be attributed to
manufacturing defects of the appliance. In addition, the warranty does not
cover any case of improper use of the appliance and professional use. All
liability is disclaimed for any damage that may directly or indirectly be
caused to persons, property and pets as a result of failure to comply with all
the instructions provided in the “Instructions and Warnings Booklet” regarding
appliance installation, use and maintenance.
This is without prejudice to any contractual warranty claims against the
seller.
Methods of support
Appliance repairs must be carried out by an authorised Service Centre. If the
faulty appliance is under warranty, it must be sent to the Service Centre
together with a fiscal document that can confirm the date of sale or delivery.
CONTACT DETAILS
IMETEC UK LTD, 7 VERITY COURT, MIDDLEWICH, CHESHIRE, CW10 0GW UK
Bellissima@imetec.co.uk
Imetec UK ltd, 7 Verity Court, Middlewich, Cheshire CW10 0GW UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>