VEVOR CW02 Hitch Mount Cargo Carrier User Manual
- June 2, 2024
- VEVOR
Table of Contents
VEVOR CW02 Hitch Mount Cargo Carrier
We continue to be committed to providing you tools with at competitive prices. Baange you, men, one tom buying online to sit a son are on the material an estimate of doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions?
Need technical support?
Please feel free to contact us: at
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Adhere to all Department of Transportation (D.O.T.) requirements when using this product. Use ropes and tie-downs (not included) to securely hold all cargo in place.
- For the vehicle that will support the Cargo Carrier, read all pertinent vehicle instructions and warnings provided in the owner’s manual.
- Make sure the vehicle’s engine is OFF, with the parking brake set, before loading or unloading the Cargo Carrier.
- This Cargo Carrier must be attached to a 2″x2″ Class Ill or Class IV hitch receiver. The hitch must be properly installed by a qualified service technician and be certified to support the weight of this Cargo Carrier and its contents.
- This Cargo Carrier is designed to haul firewood, coolers and other similar loads. Do not modify the Carrier and do not use this product for purposes that it was not designed for.
- Do not overload the Cargo Carrier. Never exceed the maximum weight capacity.
- When assembly is complete, check and test all vehicle systems including lights and brakes; make sure no damage occurs during product installation.
- Frequently check the condition of the Cargo Carrier and the vehicle’s hitch receive Make sure all components are in good condition.
- If the Cargo Carrier or hitch receiver becomes damaged through accident, or if any weld damage is noted, the product should be replaced. Check to make sure that all hardware is tightly secured in place. Keep the Cargo Carrier clean.
- Use common sense when working. Stay alert and concentrate when setting up and using the Cargo Carrier. Never work while under the influence of alcohol, drugs or medications.
- While assembling and using the Cargo Carrier keep the work area clean and well-lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose-fitting clothing or jewellery when working. Contain long hair, and keep hair, clothing and gloves away from moving parts.
- Be aware of the danger of “dynamic loading”. This situation arises when a load is dropped onto the Carrier, resulting in a short-term excessive load.
- Dynamic loading can result in damage and failure of the Carrier and/or hitch receiver, and personal injury to the person loading the Carrier.
- Never load people or animals into the Cargo Carrier.
- The weight inside the Cargo Carrier should be evenly distributed, with heavier items positioned towards the centre of the Carrier.
- Note the position of the vehicle’s exhaust pipes before setting up the Cargo Carrier.
- Make sure exhaust pipes are not nearby to the Cargo Carrier; flammable goods in the Cargo Carrier could catch on fire due to heat from the exhaust. If this risk exists on your vehicle, do not use the Cargo Carrier.
- Do not ride in the vehicle being loaded or unloaded. Load and unload the vehicle slowly, according to manual instructions.
Specifications
| Model Series | CW02 |
|---|---|
| Maximum Load Capacity（lbs） | 400 |
| For Use With | 2’’ x 2’’ Class III and IV Hitch Receivers |
| Cargo Basket Dimensions（mm） | 1524×610×356 |
| Gross Weight(kg) | 28.2 |
| MEAS(mm) | 1575×635×145 |
Package Contents
| Part | Description | Qty |
|---|---|---|
| 1 | Rear Long Frame | 1 |
| 2 | Short Frame | 2 |
| 3 | U-shaped Lock Ring | 1 |
| 4 | Nut M10 | 7 |
| 5 | Washer | 7 |
| 6 | Support Rod | 1 |
| 7 | Reinforcing Plate | 2 |
| 8 | Bolt M10×70 | 2 |
| 9 | Rotating Seat | 1 |
| 10 | Bolt M10×20 | 4 |
| 11 | R pin φ4.0 | 1 |
| 12 | Hook Stabilizer | 1 |
| 13 | Base Frame | 4 |
| 14 | Front Long Frame | 1 |
| 15 | Rotary Bolt φ16*90 | 1 |
| 16 | R pin φ1.5 | 4 |
| 17 | R pin φ2 | 1 |
| 18 | Rotary Bolt φ10*75 | 1 |
| 19 | Rotary Bolt φ8*50 | 4 |
| 20 | Bolt M10×75 | 1 |
| 21 | Nut M8 | 2 |
Installation Guide
- Flip the cargo carrier over, And then attach the support Rod (6) to the cargo carrier with the reinforcing plate (7), Bolt (10), Bolt (8), Washers (5) and Nuts (4).
- With all cargo carriers now assembled, make sure all hardware is securely tightened.
- Attach the rotating seat(9) to the support Rod (6) with the bolt(20), nut (4), R pin(17)and rotary bolt (18)
- To place the cargo carrier on the vehicle’s hitch receiver:
- With a helper, lift the empty cargo carrier and insert the rotating seat(9) into the vehicle’s hitch receiver.
- Align the holes on the rotating seat(9) and the vehicle’s hitch receiver, and then insert the rotary bolt(15) into the holes, insert the R-pin(11) into the holes of the rotary bolt(15) last.
- Stand frame(1)(2)(14) up, Align the holes on frame (1) and frame (2) and then insert the rotary bolt(19) into the holes insert the R-pin(16) into the holes of the rotary bolt for last.
- Load the cargo carrier as needed. Use ropes and tie-downs to securely hold all cargo in place.
- When there is no cargo in the cargo frame, you can pull out the rotary bolt(18), flip the entire cargo frame 90 degrees, insert the rotary bolt(18) to up holes of the rotating seat(9), insert the R-pin(17) to the holes of the rotary bolt(18) for last.
Support and E-Warranty Certificate
https://www.vevor.com/support
Made In China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>