VEVOR RYTC0071 Panel Carts User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR RYTC0071 Panel Carts
Specifications
- Model: RYTC0071
- Product: Panel Carts
Product Information
- The Panel Cart is designed to assist in transporting heavy or large panels with ease.
- It is essential to follow the assembly instructions and safety precautions provided in the user manual to ensure safe and proper usage of the product.
Product Usage Instructions
Safety Instruction and Precautions
WARNING: Read all safety instructions before using the product to avoid serious injury.
- Assemble the panel cart according to the provided instructions.
- Wear appropriate safety gear such as safety goggles and work gloves during assembly.
- Ensure the assembly area is clean, well-lit, and bystander-free.
- Avoid assembly when fatigued or under the influence of substances.
- Assemble on a flat, level surface capable of supporting the loaded cart safely.
The assembly of the panel cart requires a spanner and a hexagon spanner. These tools should be included with the product.
Assembly Steps
- Place the parts as shown in the diagram and secure them with 55mm long screws.
- Attach the wheels to the frame facing up using 16mm screws.
- Tighten all screws securely, including M5 screws for additional components.
- Place the handrail on the column and fasten it with a 40mm screw and nut.
- Upon completion of these steps, the assembly is finished.
FAQ
- Q: Where can I find technical support or warranty information for the Panel Cart?
- A: For technical support or warranty inquiries, please visit our website at www.vevor.com/support or contact Customer Service at CustomerService@vevor.com.
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
MODEL: RYTC0071
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTION AND PRECAUTIONS
WARNING
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded panel cart.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded panel cart.
- Use as intended only. To prevent tipping, push/pull using supplied handle only. Do not lift while loaded.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
TOOL REQUIRED FOR INSTALLATION
Note: The tools included with this product.
PARTS LIST
1- Carling
| ****
2- Crossbeam
| ****
3- Wheel Mounting Board
| 4- Intermediate
Transverse Girder
---|---|---|---
| | |
5- Angle Bead| 6- Handrail| 7- Beams| 8-
SwivelCaster
|
| ****
|
9- Screw| 10- Nuts| 11- Polyester strap|
|
| ****|
ASSEMBLY
- Place the parts according to the picture shown, and strengthen them with 55mm long screws.
- Install the wheels from the frame facing up and strengthen them with 16mm screws.
- Tighten it with the M5 screws.
- Place the handrail on the column and secure with 40mm screw and nut.
- Assembly completed.
| Items | Description | |
|---|---|---|
| 1 | Name | Panel carts |
| 2 | Model | RYTC0071 |
| 3 | Parameter | Load(Max):1800LBS , Wheel:5″ |
| 4 | Package |
Size
| 1160x320x195mm
5| G.W.| 24.55KG
Technical Support and E-Warranty Certificate www.vevor.com/support.
CONTACT
- Have product questions? Need technical support? Please feel free to contact us:
- CustomerService@vevor.com.